diff options
Diffstat (limited to 'tests/run-tests.py')
| -rwxr-xr-x | tests/run-tests.py | 98 |
1 files changed, 63 insertions, 35 deletions
diff --git a/tests/run-tests.py b/tests/run-tests.py index 9294c7e636..cb7a8b7705 100755 --- a/tests/run-tests.py +++ b/tests/run-tests.py @@ -105,14 +105,11 @@ PC_PLATFORMS = ("darwin", "linux", "win32") # These are tests that are difficult to detect that they should not be run on the given target. platform_tests_to_skip = { "esp8266": ( - "micropython/viper_args.py", # too large - "micropython/viper_binop_arith.py", # too large - "misc/rge_sm.py", # too large + "misc/rge_sm.py", # incorrect values due to object representation C ), "minimal": ( "basics/class_inplace_op.py", # all special methods not supported "basics/subclass_native_init.py", # native subclassing corner cases not support - "misc/rge_sm.py", # too large "micropython/opt_level.py", # don't assume line numbers are stored ), "nrf": ( @@ -272,22 +269,17 @@ def detect_test_platform(pyb, args): print() -def prepare_script_for_target(args, *, script_filename=None, script_text=None, force_plain=False): +def prepare_script_for_target(args, *, script_text=None, force_plain=False): if force_plain or (not args.via_mpy and args.emit == "bytecode"): - if script_filename is not None: - with open(script_filename, "rb") as f: - script_text = f.read() + # A plain test to run as-is, no processing needed. + pass elif args.via_mpy: tempname = tempfile.mktemp(dir="") mpy_filename = tempname + ".mpy" - if script_filename is None: - script_filename = tempname + ".py" - cleanup_script_filename = True - with open(script_filename, "wb") as f: - f.write(script_text) - else: - cleanup_script_filename = False + script_filename = tempname + ".py" + with open(script_filename, "wb") as f: + f.write(script_text) try: subprocess.check_output( @@ -303,8 +295,7 @@ def prepare_script_for_target(args, *, script_filename=None, script_text=None, f script_text = b"__buf=" + bytes(repr(f.read()), "ascii") + b"\n" rm_f(mpy_filename) - if cleanup_script_filename: - rm_f(script_filename) + rm_f(script_filename) script_text += bytes(injected_import_hook_code, "ascii") else: @@ -315,9 +306,21 @@ def prepare_script_for_target(args, *, script_filename=None, script_text=None, f def run_script_on_remote_target(pyb, args, test_file, is_special): - had_crash, script = prepare_script_for_target( - args, script_filename=test_file, force_plain=is_special - ) + with open(test_file, "rb") as f: + script = f.read() + + # If the test is not a special test, prepend it with a print to indicate that it started. + # If the print does not execute this means that the test did not even start, eg it was + # too large for the target. + prepend_start_test = not is_special + if prepend_start_test: + if script.startswith(b"#"): + script = b"print('START TEST')" + script + else: + script = b"print('START TEST')\n" + script + + had_crash, script = prepare_script_for_target(args, script_text=script, force_plain=is_special) + if had_crash: return True, script @@ -328,9 +331,19 @@ def run_script_on_remote_target(pyb, args, test_file, is_special): except pyboard.PyboardError as e: had_crash = True if not is_special and e.args[0] == "exception": - output_mupy = e.args[1] + e.args[2] + b"CRASH" + if prepend_start_test and e.args[1] == b"" and b"MemoryError" in e.args[2]: + output_mupy = b"SKIP-TOO-LARGE\n" + else: + output_mupy = e.args[1] + e.args[2] + b"CRASH" else: output_mupy = bytes(e.args[0], "ascii") + b"\nCRASH" + + if prepend_start_test: + if output_mupy.startswith(b"START TEST\r\n"): + output_mupy = output_mupy.removeprefix(b"START TEST\r\n") + else: + had_crash = True + return had_crash, output_mupy @@ -474,7 +487,7 @@ def run_micropython(pyb, args, test_file, test_file_abspath, is_special=False): output_mupy = output_mupy.replace(b"\r\n", b"\n") # don't try to convert the output if we should skip this test - if had_crash or output_mupy in (b"SKIP\n", b"CRASH"): + if had_crash or output_mupy in (b"SKIP\n", b"SKIP-TOO-LARGE\n", b"CRASH"): return output_mupy # skipped special tests will output "SKIP" surrounded by other interpreter debug output @@ -605,9 +618,7 @@ class PyboardNodeRunner: def run_tests(pyb, tests, args, result_dir, num_threads=1): test_count = ThreadSafeCounter() testcase_count = ThreadSafeCounter() - passed_tests = ThreadSafeCounter([]) - failed_tests = ThreadSafeCounter([]) - skipped_tests = ThreadSafeCounter([]) + test_results = ThreadSafeCounter([]) skip_tests = set() skip_native = False @@ -896,7 +907,7 @@ def run_tests(pyb, tests, args, result_dir, num_threads=1): if skip_it: print("skip ", test_file) - skipped_tests.append((test_name, test_file)) + test_results.append((test_name, test_file, "skip", "")) return # Run the test on the MicroPython target. @@ -911,7 +922,11 @@ def run_tests(pyb, tests, args, result_dir, num_threads=1): # start-up code (eg boot.py) when preparing to run the next test. pyb.read_until(1, b"raw REPL; CTRL-B to exit\r\n") print("skip ", test_file) - skipped_tests.append((test_name, test_file)) + test_results.append((test_name, test_file, "skip", "")) + return + elif output_mupy == b"SKIP-TOO-LARGE\n": + print("lrge ", test_file) + test_results.append((test_name, test_file, "skip", "too large")) return # Look at the output of the test to see if unittest was used. @@ -994,7 +1009,7 @@ def run_tests(pyb, tests, args, result_dir, num_threads=1): # Print test summary, update counters, and save .exp/.out files if needed. if test_passed: print("pass ", test_file, extra_info) - passed_tests.append((test_name, test_file)) + test_results.append((test_name, test_file, "pass", "")) rm_f(filename_expected) rm_f(filename_mupy) else: @@ -1006,7 +1021,7 @@ def run_tests(pyb, tests, args, result_dir, num_threads=1): rm_f(filename_expected) # in case left over from previous failed run with open(filename_mupy, "wb") as f: f.write(output_mupy) - failed_tests.append((test_name, test_file)) + test_results.append((test_name, test_file, "fail", "")) test_count.increment() @@ -1035,9 +1050,13 @@ def run_tests(pyb, tests, args, result_dir, num_threads=1): print(line) sys.exit(1) - passed_tests = sorted(passed_tests.value) - skipped_tests = sorted(skipped_tests.value) - failed_tests = sorted(failed_tests.value) + test_results = test_results.value + passed_tests = list(r for r in test_results if r[2] == "pass") + skipped_tests = list(r for r in test_results if r[2] == "skip" and r[3] != "too large") + skipped_tests_too_large = list( + r for r in test_results if r[2] == "skip" and r[3] == "too large" + ) + failed_tests = list(r for r in test_results if r[2] == "fail") print( "{} tests performed ({} individual testcases)".format( @@ -1053,6 +1072,13 @@ def run_tests(pyb, tests, args, result_dir, num_threads=1): ) ) + if len(skipped_tests_too_large) > 0: + print( + "{} tests skipped because they are too large: {}".format( + len(skipped_tests_too_large), " ".join(test[0] for test in skipped_tests_too_large) + ) + ) + if len(failed_tests) > 0: print( "{} tests failed: {}".format( @@ -1069,9 +1095,11 @@ def run_tests(pyb, tests, args, result_dir, num_threads=1): with open(os.path.join(result_dir, RESULTS_FILE), "w") as f: json.dump( { + # The arguments passed on the command-line. "args": vars(args), - "passed_tests": [test[1] for test in passed_tests], - "skipped_tests": [test[1] for test in skipped_tests], + # A list of all results of the form [(test, result, reason), ...]. + "results": list(test[1:] for test in test_results), + # A list of failed tests. This is deprecated, use the "results" above instead. "failed_tests": [test[1] for test in failed_tests], }, f, @@ -1248,7 +1276,7 @@ the last matching regex is used: results_file = os.path.join(args.result_dir, RESULTS_FILE) if os.path.exists(results_file): with open(results_file, "r") as f: - tests = json.load(f)["failed_tests"] + tests = list(test[0] for test in json.load(f)["results"] if test[1] == "fail") else: tests = [] elif len(args.files) == 0: |