diff options
Diffstat (limited to 'stm/cc3k/hci.h')
| -rw-r--r-- | stm/cc3k/hci.h | 336 |
1 files changed, 0 insertions, 336 deletions
diff --git a/stm/cc3k/hci.h b/stm/cc3k/hci.h deleted file mode 100644 index 3466a9cfe6..0000000000 --- a/stm/cc3k/hci.h +++ /dev/null @@ -1,336 +0,0 @@ -/***************************************************************************** -* -* hci.h - CC3000 Host Driver Implementation. -* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ -* -* Adapted for use with the Arduino/AVR by KTOWN (Kevin Townsend) -* & Limor Fried for Adafruit Industries -* This library works with the Adafruit CC3000 breakout -* ----> https://www.adafruit.com/products/1469 -* Adafruit invests time and resources providing this open source code, -* please support Adafruit and open-source hardware by purchasing -* products from Adafruit! -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions -* are met: -* -* Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* -* Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the -* distribution. -* -* Neither the name of Texas Instruments Incorporated nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -*****************************************************************************/ -#ifndef __HCI_H__ -#define __HCI_H__ - -#include "cc3000_common.h" - -//***************************************************************************** -// -// If building with a C++ compiler, make all of the definitions in this header -// have a C binding. -// -//***************************************************************************** -#ifdef __cplusplus -extern "C" { -#endif - - -#define SPI_HEADER_SIZE (5) -#define SIMPLE_LINK_HCI_CMND_HEADER_SIZE (4) -#define HEADERS_SIZE_CMD (SPI_HEADER_SIZE + SIMPLE_LINK_HCI_CMND_HEADER_SIZE) -#define SIMPLE_LINK_HCI_DATA_CMND_HEADER_SIZE (5) -#define SIMPLE_LINK_HCI_DATA_HEADER_SIZE (5) -#define SIMPLE_LINK_HCI_PATCH_HEADER_SIZE (2) - - -//***************************************************************************** -// -// Values that can be used as HCI Commands and HCI Packet header defines -// -//***************************************************************************** -#define HCI_TYPE_CMND 0x1 -#define HCI_TYPE_DATA 0x2 -#define HCI_TYPE_PATCH 0x3 -#define HCI_TYPE_EVNT 0x4 - - -#define HCI_EVENT_PATCHES_DRV_REQ (1) -#define HCI_EVENT_PATCHES_FW_REQ (2) -#define HCI_EVENT_PATCHES_BOOTLOAD_REQ (3) - - -#define HCI_CMND_WLAN_BASE (0x0000) -#define HCI_CMND_WLAN_CONNECT 0x0001 -#define HCI_CMND_WLAN_DISCONNECT 0x0002 -#define HCI_CMND_WLAN_IOCTL_SET_SCANPARAM 0x0003 -#define HCI_CMND_WLAN_IOCTL_SET_CONNECTION_POLICY 0x0004 -#define HCI_CMND_WLAN_IOCTL_ADD_PROFILE 0x0005 -#define HCI_CMND_WLAN_IOCTL_DEL_PROFILE 0x0006 -#define HCI_CMND_WLAN_IOCTL_GET_SCAN_RESULTS 0x0007 -#define HCI_CMND_EVENT_MASK 0x0008 -#define HCI_CMND_WLAN_IOCTL_STATUSGET 0x0009 -#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_START 0x000A -#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_STOP 0x000B -#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_SET_PREFIX 0x000C -#define HCI_CMND_WLAN_CONFIGURE_PATCH 0x000D - - -#define HCI_CMND_SOCKET_BASE 0x1000 -#define HCI_CMND_SOCKET 0x1001 -#define HCI_CMND_BIND 0x1002 -#define HCI_CMND_RECV 0x1004 -#define HCI_CMND_ACCEPT 0x1005 -#define HCI_CMND_LISTEN 0x1006 -#define HCI_CMND_CONNECT 0x1007 -#define HCI_CMND_BSD_SELECT 0x1008 -#define HCI_CMND_SETSOCKOPT 0x1009 -#define HCI_CMND_GETSOCKOPT 0x100A -#define HCI_CMND_CLOSE_SOCKET 0x100B -#define HCI_CMND_RECVFROM 0x100D -#define HCI_CMND_GETHOSTNAME 0x1010 -#define HCI_CMND_MDNS_ADVERTISE 0x1011 - - -#define HCI_DATA_BASE 0x80 - -#define HCI_CMND_SEND (0x01 + HCI_DATA_BASE) -#define HCI_CMND_SENDTO (0x03 + HCI_DATA_BASE) -#define HCI_DATA_BSD_RECVFROM (0x04 + HCI_DATA_BASE) -#define HCI_DATA_BSD_RECV (0x05 + HCI_DATA_BASE) - - -#define HCI_CMND_NVMEM_CBASE (0x0200) - - -#define HCI_CMND_NVMEM_CREATE_ENTRY (0x0203) -#define HCI_CMND_NVMEM_SWAP_ENTRY (0x0205) -#define HCI_CMND_NVMEM_READ (0x0201) -#define HCI_CMND_NVMEM_WRITE (0x0090) -#define HCI_CMND_NVMEM_WRITE_PATCH (0x0204) -#define HCI_CMND_READ_SP_VERSION (0x0207) - -#define HCI_CMND_READ_BUFFER_SIZE 0x400B -#define HCI_CMND_SIMPLE_LINK_START 0x4000 - -#define HCI_CMND_NETAPP_BASE 0x2000 - -#define HCI_NETAPP_DHCP (0x0001 + HCI_CMND_NETAPP_BASE) -#define HCI_NETAPP_PING_SEND (0x0002 + HCI_CMND_NETAPP_BASE) -#define HCI_NETAPP_PING_REPORT (0x0003 + HCI_CMND_NETAPP_BASE) -#define HCI_NETAPP_PING_STOP (0x0004 + HCI_CMND_NETAPP_BASE) -#define HCI_NETAPP_IPCONFIG (0x0005 + HCI_CMND_NETAPP_BASE) -#define HCI_NETAPP_ARP_FLUSH (0x0006 + HCI_CMND_NETAPP_BASE) -#define HCI_NETAPP_SET_DEBUG_LEVEL (0x0008 + HCI_CMND_NETAPP_BASE) -#define HCI_NETAPP_SET_TIMERS (0x0009 + HCI_CMND_NETAPP_BASE) - - - - - - -//***************************************************************************** -// -// Values that can be used as HCI Events defines -// -//***************************************************************************** -#define HCI_EVNT_WLAN_BASE 0x0000 -#define HCI_EVNT_WLAN_CONNECT 0x0001 -#define HCI_EVNT_WLAN_DISCONNECT \ - 0x0002 -#define HCI_EVNT_WLAN_IOCTL_ADD_PROFILE \ - 0x0005 - - -#define HCI_EVNT_SOCKET HCI_CMND_SOCKET -#define HCI_EVNT_BIND HCI_CMND_BIND -#define HCI_EVNT_RECV HCI_CMND_RECV -#define HCI_EVNT_ACCEPT HCI_CMND_ACCEPT -#define HCI_EVNT_LISTEN HCI_CMND_LISTEN -#define HCI_EVNT_CONNECT HCI_CMND_CONNECT -#define HCI_EVNT_SELECT HCI_CMND_BSD_SELECT -#define HCI_EVNT_CLOSE_SOCKET HCI_CMND_CLOSE_SOCKET -#define HCI_EVNT_RECVFROM HCI_CMND_RECVFROM -#define HCI_EVNT_SETSOCKOPT HCI_CMND_SETSOCKOPT -#define HCI_EVNT_GETSOCKOPT HCI_CMND_GETSOCKOPT -#define HCI_EVNT_BSD_GETHOSTBYNAME HCI_CMND_GETHOSTNAME -#define HCI_EVNT_MDNS_ADVERTISE HCI_CMND_MDNS_ADVERTISE - -#define HCI_EVNT_SEND 0x1003 -#define HCI_EVNT_WRITE 0x100E -#define HCI_EVNT_SENDTO 0x100F - -#define HCI_EVNT_PATCHES_REQ 0x1000 - -#define HCI_EVNT_UNSOL_BASE 0x4000 - -#define HCI_EVNT_WLAN_UNSOL_BASE (0x8000) - -#define HCI_EVNT_WLAN_UNSOL_CONNECT (0x0001 + HCI_EVNT_WLAN_UNSOL_BASE) -#define HCI_EVNT_WLAN_UNSOL_DISCONNECT (0x0002 + HCI_EVNT_WLAN_UNSOL_BASE) -#define HCI_EVNT_WLAN_UNSOL_INIT (0x0004 + HCI_EVNT_WLAN_UNSOL_BASE) -#define HCI_EVNT_WLAN_TX_COMPLETE (0x0008 + HCI_EVNT_WLAN_UNSOL_BASE) -#define HCI_EVNT_WLAN_UNSOL_DHCP (0x0010 + HCI_EVNT_WLAN_UNSOL_BASE) -#define HCI_EVNT_WLAN_ASYNC_PING_REPORT (0x0040 + HCI_EVNT_WLAN_UNSOL_BASE) -#define HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE (0x0080 + HCI_EVNT_WLAN_UNSOL_BASE) -#define HCI_EVNT_WLAN_KEEPALIVE (0x0200 + HCI_EVNT_WLAN_UNSOL_BASE) -#define HCI_EVNT_BSD_TCP_CLOSE_WAIT (0x0800 + HCI_EVNT_WLAN_UNSOL_BASE) - -#define HCI_EVNT_DATA_UNSOL_FREE_BUFF \ - 0x4100 - -#define HCI_EVNT_NVMEM_CREATE_ENTRY \ - HCI_CMND_NVMEM_CREATE_ENTRY -#define HCI_EVNT_NVMEM_SWAP_ENTRY HCI_CMND_NVMEM_SWAP_ENTRY - -#define HCI_EVNT_NVMEM_READ HCI_CMND_NVMEM_READ -#define HCI_EVNT_NVMEM_WRITE (0x0202) - -#define HCI_EVNT_READ_SP_VERSION \ - HCI_CMND_READ_SP_VERSION - -#define HCI_EVNT_INPROGRESS 0xFFFF - - -#define HCI_DATA_RECVFROM 0x84 -#define HCI_DATA_RECV 0x85 -#define HCI_DATA_NVMEM 0x91 - -#define HCI_EVENT_CC3000_CAN_SHUT_DOWN 0x99 - -//***************************************************************************** -// -// Prototypes for the structures for APIs. -// -//***************************************************************************** - -#define HCI_DATA_HEADER_SIZE (5) -#define HCI_EVENT_HEADER_SIZE (5) -#define HCI_DATA_CMD_HEADER_SIZE (5) -#define HCI_PATCH_HEADER_SIZE (6) - -#define HCI_PACKET_TYPE_OFFSET (0) -#define HCI_PACKET_ARGSIZE_OFFSET (2) -#define HCI_PACKET_LENGTH_OFFSET (3) - - -#define HCI_EVENT_OPCODE_OFFSET (1) -#define HCI_EVENT_LENGTH_OFFSET (3) -#define HCI_EVENT_STATUS_OFFSET (4) -#define HCI_DATA_LENGTH_OFFSET (3) - - - - -//***************************************************************************** -// -// Prototypes for the APIs. -// -//***************************************************************************** - -//***************************************************************************** -// -//! hci_command_send -//! -//! @param usOpcode command operation code -//! @param pucBuff pointer to the command's arguments buffer -//! @param ucArgsLength length of the arguments -//! -//! @return none -//! -//! @brief Initiate an HCI command. -// -//***************************************************************************** -extern unsigned short hci_command_send(unsigned short usOpcode, - unsigned char *ucArgs, - unsigned char ucArgsLength); - - -//***************************************************************************** -// -//! hci_data_send -//! -//! @param usOpcode command operation code -//! @param ucArgs pointer to the command's arguments buffer -//! @param usArgsLength length of the arguments -//! @param ucTail pointer to the data buffer -//! @param usTailLength buffer length -//! -//! @return none -//! -//! @brief Initiate an HCI data write operation -// -//***************************************************************************** -extern long hci_data_send(unsigned char ucOpcode, - unsigned char *ucArgs, - unsigned short usArgsLength, - unsigned short usDataLength, - const unsigned char *ucTail, - unsigned short usTailLength); - - -//***************************************************************************** -// -//! hci_data_command_send -//! -//! @param usOpcode command operation code -//! @param pucBuff pointer to the data buffer -//! @param ucArgsLength arguments length -//! @param ucDataLength data length -//! -//! @return none -//! -//! @brief Prepare HCI header and initiate an HCI data write operation -// -//***************************************************************************** -extern void hci_data_command_send(unsigned short usOpcode, unsigned char *pucBuff, - unsigned char ucArgsLength, unsigned short ucDataLength); - -//***************************************************************************** -// -//! hci_patch_send -//! -//! @param usOpcode command operation code -//! @param pucBuff pointer to the command's arguments buffer -//! @param patch pointer to patch content buffer -//! @param usDataLength data length -//! -//! @return none -//! -//! @brief Prepare HCI header and initiate an HCI patch write operation -// -//***************************************************************************** -extern void hci_patch_send(unsigned char ucOpcode, unsigned char *pucBuff, char *patch, unsigned short usDataLength); - - - -//***************************************************************************** -// -// Mark the end of the C bindings section for C++ compilers. -// -//***************************************************************************** -#ifdef __cplusplus -} -#endif // __cplusplus - -#endif // __HCI_H__ |