1 files changed, 88 insertions, 0 deletions
diff --git a/ports/stm32/boards/PYBD_SF6/board_init.c b/ports/stm32/boards/PYBD_SF6/board_init.c
index c7a9f28006..836c4db8b5 100644
--- a/ports/stm32/boards/PYBD_SF6/board_init.c
+++ b/ports/stm32/boards/PYBD_SF6/board_init.c
@@ -1 +1,89 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2025 Damien P. George
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdbool.h>
+#include "boardctrl.h"
+#include "qspi.h"
+
+#if BUILDING_MBOOT
+#include "mboot/mboot.h"
+#endif
+
+// Use PYBD_SF2 as base configuration.
 #include "boards/PYBD_SF2/board_init.c"
+
+// Adesto AT25SF161 16-MBit.
+static const mp_spiflash_chip_params_t chip_params_at25sf161 = {
+    .jedec_id = 0x01861f,
+    .memory_size_bytes_log2 = 21,
+    .qspi_prescaler = 3, // maximum frequency 104MHz
+    .qread_num_dummy = 2,
+};
+
+// Infineon S25FL064 64-MBit.
+static const mp_spiflash_chip_params_t chip_params_s25fl064 = {
+    .jedec_id = 0x176001,
+    .memory_size_bytes_log2 = 23,
+    .qspi_prescaler = 2, // maximum frequency 108MHz
+    .qread_num_dummy = 4,
+};
+
+// Selection of possible SPI flash chips.
+static const mp_spiflash_chip_params_t *const chip_params_table[] = {
+    &chip_params_at25sf161,
+    &chip_params_s25fl064,
+};
+
+void board_early_init_sf6(void) {
+    // Initialise default SPI flash parameters.
+    MICROPY_BOARD_SPIFLASH_CHIP_PARAMS0 = &chip_params_at25sf161;
+    MICROPY_BOARD_SPIFLASH_CHIP_PARAMS1 = &chip_params_at25sf161;
+
+    // Continue with standard board early init.
+    board_early_init();
+}
+
+int mp_spiflash_detect(mp_spiflash_t *spiflash, int ret, uint32_t devid) {
+    if (ret != 0) {
+        // Could not identify flash.  Succeed anyway using default chip parameters.
+        return 0;
+    }
+
+    // Try to detect the SPI flash based on the JEDEC id.
+    for (size_t i = 0; i < MP_ARRAY_SIZE(chip_params_table); ++i) {
+        if (devid == chip_params_table[i]->jedec_id) {
+            spiflash->chip_params = chip_params_table[i];
+            if (spiflash->config->bus_kind == MP_SPIFLASH_BUS_QSPI) {
+                // Reinitialise the QSPI but to set new size, prescaler and dummy bytes.
+                uint8_t num_dummy = spiflash->chip_params->qread_num_dummy;
+                spiflash->config->bus.u_qspi.proto->ioctl(spiflash->config->bus.u_qspi.data, MP_QSPI_IOCTL_INIT, num_dummy);
+            }
+            break;
+        }
+    }
+
+    return 0;
+}