diff options
Diffstat (limited to 'ports/esp32/boards')
38 files changed, 151 insertions, 98 deletions
diff --git a/ports/esp32/boards/ARDUINO_NANO_ESP32/board.json b/ports/esp32/boards/ARDUINO_NANO_ESP32/board.json index 9d0016017f..936a498b5e 100644 --- a/ports/esp32/boards/ARDUINO_NANO_ESP32/board.json +++ b/ports/esp32/boards/ARDUINO_NANO_ESP32/board.json @@ -17,8 +17,8 @@ "ABX00092_01.iso_1000x750.jpg" ], "mcu": "esp32s3", - "product": "Arduino Nano ESP32", + "product": "Nano ESP32", "thumbnail": "", - "url": "https://store.arduino.cc/products/arduino-nano-esp32", + "url": "https://docs.arduino.cc/hardware/nano-esp32/", "vendor": "Arduino" } diff --git a/ports/esp32/boards/ESP32_GENERIC/board.md b/ports/esp32/boards/ESP32_GENERIC/board.md index 9346d18d84..06972e436f 100644 --- a/ports/esp32/boards/ESP32_GENERIC/board.md +++ b/ports/esp32/boards/ESP32_GENERIC/board.md @@ -1,5 +1,5 @@ The following files are firmware that should work on most ESP32-based boards -with 4MiB of flash, including WROOM WROVER, SOLO, PICO, and MINI modules. +with 4MiB or more of flash, including WROOM WROVER, SOLO, PICO, and MINI modules. This board has multiple variants available: diff --git a/ports/esp32/boards/ESP32_GENERIC_C3/board.md b/ports/esp32/boards/ESP32_GENERIC_C3/board.md index 1604b879c5..6097eb85df 100644 --- a/ports/esp32/boards/ESP32_GENERIC_C3/board.md +++ b/ports/esp32/boards/ESP32_GENERIC_C3/board.md @@ -1,6 +1,6 @@ The following files are firmware images that should work on most -ESP32-C3-based boards with 4MiB of flash, including WROOM and MINI modules, -that use the revision 3 silicon (or newer). +ESP32-C3-based boards with 4MiB or more of flash, including WROOM and MINI +modules, that use the revision 3 silicon (or newer). USB serial/JTAG support is enabled on pin 18 and 19. Note that this is not a full USB stack, the C3 just provides a CDC/ACM class serial diff --git a/ports/esp32/boards/ESP32_GENERIC_S2/board.md b/ports/esp32/boards/ESP32_GENERIC_S2/board.md index 3e46c02467..d065ecbbb9 100644 --- a/ports/esp32/boards/ESP32_GENERIC_S2/board.md +++ b/ports/esp32/boards/ESP32_GENERIC_S2/board.md @@ -1,5 +1,5 @@ The following files are firmware that should work on most ESP32-S2-based -boards with 4MiB of flash, including WROOM, WROVER, and MINI modules. +boards with 4MiB or more of flash, including WROOM, WROVER, and MINI modules. This firmware supports configurations with and without SPIRAM (also known as PSRAM) and will auto-detect a connected SPIRAM chip at startup and allocate diff --git a/ports/esp32/boards/ESP32_GENERIC_S3/board.json b/ports/esp32/boards/ESP32_GENERIC_S3/board.json index fd0c9edce0..7a546d35fc 100644 --- a/ports/esp32/boards/ESP32_GENERIC_S3/board.json +++ b/ports/esp32/boards/ESP32_GENERIC_S3/board.json @@ -21,7 +21,6 @@ "url": "https://www.espressif.com/en/products/modules", "vendor": "Espressif", "variants": { - "SPIRAM_OCT": "Support for Octal-SPIRAM", - "FLASH_4M": "4MiB flash" + "SPIRAM_OCT": "Support for Octal-SPIRAM" } } diff --git a/ports/esp32/boards/ESP32_GENERIC_S3/board.md b/ports/esp32/boards/ESP32_GENERIC_S3/board.md index 16930c9193..68ce0917e0 100644 --- a/ports/esp32/boards/ESP32_GENERIC_S3/board.md +++ b/ports/esp32/boards/ESP32_GENERIC_S3/board.md @@ -1,9 +1,7 @@ The following files are firmware that should work on most ESP32-S3-based -boards with 4/8MiB of flash, including WROOM and MINI modules. +boards with 4MiB or more of flash, including WROOM and MINI modules. This firmware supports configurations with and without SPIRAM (also known as PSRAM) and will auto-detect a connected SPIRAM chip at startup and allocate the MicroPython heap accordingly. However if your board has Octal SPIRAM, then use the "spiram-oct" variant. - -If your board has 4MiB flash (including ESP32-S3FH4R2 based ones with embedded flash), then use the "flash-4m" build. diff --git a/ports/esp32/boards/ESP32_GENERIC_S3/mpconfigvariant_FLASH_4M.cmake b/ports/esp32/boards/ESP32_GENERIC_S3/mpconfigvariant_FLASH_4M.cmake deleted file mode 100644 index e832cdb60f..0000000000 --- a/ports/esp32/boards/ESP32_GENERIC_S3/mpconfigvariant_FLASH_4M.cmake +++ /dev/null @@ -1,4 +0,0 @@ -set(SDKCONFIG_DEFAULTS - ${SDKCONFIG_DEFAULTS} - boards/ESP32_GENERIC_S3/sdkconfig.flash_4m -) diff --git a/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.board b/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.board index 9839b0d300..369330682f 100644 --- a/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.board +++ b/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.board @@ -1,8 +1,2 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y - -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" diff --git a/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.flash_4m b/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.flash_4m deleted file mode 100644 index c967c46ae6..0000000000 --- a/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.flash_4m +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_8MB= - -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-4MiB.csv" diff --git a/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/board.json b/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/board.json new file mode 100644 index 0000000000..d2ada7cccd --- /dev/null +++ b/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/board.json @@ -0,0 +1,23 @@ +{ + "deploy": [ + "../deploy_nativeusb.md" + ], + "deploy_options": { + "flash_offset": "0" + }, + "docs": "", + "features": [ + "BLE", + "External Flash", + "RGB LED", + "WiFi" + ], + "images": [ + "GAR-PYBSTICK26-C3-mUSB-00.JPG" + ], + "mcu": "esp32c3", + "product": "PYBSTICK26_ESP32C3", + "thumbnail": "", + "url": "https://shop.mchobby.be/fr/pybstick/2505-pybstick26-esp32-c3-micropython-et-arduino-3232100025059.html", + "vendor": "McHobby" +} diff --git a/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/mpconfigboard.cmake b/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/mpconfigboard.cmake new file mode 100644 index 0000000000..81cfff1d77 --- /dev/null +++ b/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/mpconfigboard.cmake @@ -0,0 +1,7 @@ +set(IDF_TARGET esp32c3) + +set(SDKCONFIG_DEFAULTS + boards/sdkconfig.base + boards/sdkconfig.ble + boards/GARATRONIC_PYBSTICK26_ESP32C3/sdkconfig.board +) diff --git a/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/mpconfigboard.h b/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/mpconfigboard.h new file mode 100644 index 0000000000..c9796d1f65 --- /dev/null +++ b/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/mpconfigboard.h @@ -0,0 +1,10 @@ +#define MICROPY_HW_BOARD_NAME "PYBSTICK26_ESP32C3" +#define MICROPY_HW_MCU_NAME "ESP32C3" +#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "pybstick26_esp32c3" + +#define MICROPY_HW_I2C0_SCL (1) +#define MICROPY_HW_I2C0_SDA (0) + +#define MICROPY_HW_SPI1_MOSI (7) +#define MICROPY_HW_SPI1_MISO (2) +#define MICROPY_HW_SPI1_SCK (6) diff --git a/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/pins.csv b/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/pins.csv new file mode 100644 index 0000000000..d786654903 --- /dev/null +++ b/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/pins.csv @@ -0,0 +1,13 @@ +GP0,GPIO0 +GP1,GPIO1 +GP2,GPIO2 +GP3,GPIO3 +GP4,GPIO4 +GP5,GPIO5 +GP6,GPIO6 +GP7,GPIO7 +GP8,GPIO8 +GP9,GPIO9 +GP10,GPIO10 +GP20,GPIO20 +GP21,GPIO21 diff --git a/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/sdkconfig.board b/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/sdkconfig.board new file mode 100644 index 0000000000..70e5f1f0d1 --- /dev/null +++ b/ports/esp32/boards/GARATRONIC_PYBSTICK26_ESP32C3/sdkconfig.board @@ -0,0 +1,4 @@ +CONFIG_ESP32C3_REV_MIN_3=y + +# Workaround for https://github.com/espressif/esp-idf/issues/14456 +CONFIG_ESP_SYSTEM_HW_STACK_GUARD=n diff --git a/ports/esp32/boards/LILYGO_TTGO_LORA32/board.json b/ports/esp32/boards/LILYGO_TTGO_LORA32/board.json index d68a9baadd..7521c01a6b 100644 --- a/ports/esp32/boards/LILYGO_TTGO_LORA32/board.json +++ b/ports/esp32/boards/LILYGO_TTGO_LORA32/board.json @@ -19,8 +19,8 @@ "lilygo-ttgo-lora-32-v1-6.jpg" ], "mcu": "esp32", - "product": "LILYGO TTGO LoRa32", + "product": "TTGO LoRa32", "thumbnail": "", - "url": "http://www.lilygo.cn/prod_view.aspx?TypeId=50060&Id=1270&FId=t3:50060:3", + "url": "https://www.lilygo.cc/products/lora3", "vendor": "LILYGO" } diff --git a/ports/esp32/boards/M5STACK_ATOM/board.json b/ports/esp32/boards/M5STACK_ATOM/board.json index 3a1e7ce359..c3908a4779 100644 --- a/ports/esp32/boards/M5STACK_ATOM/board.json +++ b/ports/esp32/boards/M5STACK_ATOM/board.json @@ -18,8 +18,8 @@ "m5stack_atom.jpg" ], "mcu": "esp32", - "product": "M5 Stack Atom", + "product": "Atom", "thumbnail": "", - "url": "https://m5stack.com/", - "vendor": "M5 Stack" + "url": "https://shop.m5stack.com/products/atom-matrix-esp32-development-kit", + "vendor": "M5Stack" } diff --git a/ports/esp32/boards/M5STACK_ATOMS3_LITE/board.json b/ports/esp32/boards/M5STACK_ATOMS3_LITE/board.json index fe0e97f9f9..26b1a4d54a 100644 --- a/ports/esp32/boards/M5STACK_ATOMS3_LITE/board.json +++ b/ports/esp32/boards/M5STACK_ATOMS3_LITE/board.json @@ -20,5 +20,5 @@ "product": "AtomS3 Lite", "thumbnail": "", "url": "https://shop.m5stack.com/products/atoms3-lite-esp32s3-dev-kit", - "vendor": "M5 Stack" + "vendor": "M5Stack" } diff --git a/ports/esp32/boards/M5STACK_NANOC6/board.json b/ports/esp32/boards/M5STACK_NANOC6/board.json index 087851ae5e..ddf3406c83 100644 --- a/ports/esp32/boards/M5STACK_NANOC6/board.json +++ b/ports/esp32/boards/M5STACK_NANOC6/board.json @@ -18,7 +18,7 @@ "m5stack_nanoc6.jpg" ], "mcu": "esp32c6", - "product": "M5Stack NanoC6", + "product": "NanoC6", "url": "https://shop.m5stack.com/products/m5stack-nanoc6-dev-kit", "vendor": "M5Stack" } diff --git a/ports/esp32/boards/OLIMEX_ESP32_EVB/board.json b/ports/esp32/boards/OLIMEX_ESP32_EVB/board.json index 3eb9a5e0a7..198f1d4b6d 100644 --- a/ports/esp32/boards/OLIMEX_ESP32_EVB/board.json +++ b/ports/esp32/boards/OLIMEX_ESP32_EVB/board.json @@ -18,8 +18,8 @@ "ESP32-EVB_Rev_K1.png" ], "mcu": "esp32", - "product": "Olimex ESP32 EVB", + "product": "ESP32 EVB", "thumbnail": "", - "url": "https://www.olimex.com/Products/IoT/ESP32/ESP32-EVB/open-source-hardware", - "vendor": "OLIMEX" + "url": "https://www.olimex.com/Products/IoT/ESP32/ESP32-EVB", + "vendor": "Olimex" } diff --git a/ports/esp32/boards/OLIMEX_ESP32_POE/board.json b/ports/esp32/boards/OLIMEX_ESP32_POE/board.json index cda26178d7..1b00d213c7 100644 --- a/ports/esp32/boards/OLIMEX_ESP32_POE/board.json +++ b/ports/esp32/boards/OLIMEX_ESP32_POE/board.json @@ -19,8 +19,8 @@ "ESP32-POE-ISO-1.jpg" ], "mcu": "esp32", - "product": "Olimex ESP32 POE", + "product": "ESP32 POE", "thumbnail": "", - "url": "https://www.olimex.com/", - "vendor": "OLIMEX" + "url": "https://www.olimex.com/Products/IoT/ESP32/ESP32-POE", + "vendor": "Olimex" } diff --git a/ports/esp32/boards/SIL_WESP32/board.json b/ports/esp32/boards/SIL_WESP32/board.json index 53a50f3286..7126fa7ea1 100644 --- a/ports/esp32/boards/SIL_WESP32/board.json +++ b/ports/esp32/boards/SIL_WESP32/board.json @@ -18,7 +18,7 @@ "wesp32-top.jpg" ], "mcu": "esp32", - "product": "SIL WESP32", + "product": "wESP32", "thumbnail": "", "url": "https://wesp32.com/", "vendor": "Silicognition" diff --git a/ports/esp32/boards/SIL_WESP32/sdkconfig.board b/ports/esp32/boards/SIL_WESP32/sdkconfig.board index 741a4db439..36155cd5e3 100644 --- a/ports/esp32/boards/SIL_WESP32/sdkconfig.board +++ b/ports/esp32/boards/SIL_WESP32/sdkconfig.board @@ -1,9 +1,6 @@ -# 16 MB flash +# 8 MB+ flash -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB= -CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y -CONFIG_ESPTOOLPY_FLASHSIZE="16MB" +CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y # Fast flash @@ -14,7 +11,7 @@ CONFIG_ESP32_REV_MIN_1=y # OTA CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-16MiB-ota.csv" +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiBplus-ota.csv" # Network name diff --git a/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/board.json b/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/board.json new file mode 100644 index 0000000000..8bce1a0013 --- /dev/null +++ b/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/board.json @@ -0,0 +1,23 @@ +{ + "deploy": [ + "../deploy.md" + ], + "deploy_options": { + "flash_offset": "0x1000" + }, + "docs": "", + "features": [ + "BLE", + "External Flash", + "WiFi", + "USB-C" + ], + "images": [ + "19177-Sparkfun_IoT_Redboard-ESP32.jpg" + ], + "mcu": "esp32", + "product": "ESP32 / WROOM", + "thumbnail": "", + "url": "https://www.sparkfun.com/sparkfun-iot-redboard-esp32-development-board.html", + "vendor": "SparkFun" +} diff --git a/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/manifest.py b/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/manifest.py new file mode 100644 index 0000000000..73446ecac9 --- /dev/null +++ b/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/manifest.py @@ -0,0 +1,2 @@ +include("$(PORT_DIR)/boards/manifest.py") +require("sdcard") diff --git a/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/mpconfigboard.cmake b/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/mpconfigboard.cmake new file mode 100644 index 0000000000..0ffcc38c87 --- /dev/null +++ b/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/mpconfigboard.cmake @@ -0,0 +1,7 @@ +set(SDKCONFIG_DEFAULTS + boards/sdkconfig.base + boards/sdkconfig.ble + boards/sdkconfig.240mhz +) + +set(MICROPY_FROZEN_MANIFEST ${MICROPY_BOARD_DIR}/manifest.py) diff --git a/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/mpconfigboard.h b/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/mpconfigboard.h new file mode 100644 index 0000000000..4fe888ac17 --- /dev/null +++ b/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/mpconfigboard.h @@ -0,0 +1,14 @@ +// Board and hardware specific configuration + +#define MICROPY_HW_BOARD_NAME "SparkFun IoT RedBoard ESP32" +#define MICROPY_HW_MCU_NAME "ESP32" + +// Enable UART REPL for modules that have an external USB-UART and don't use native USB. +#define MICROPY_HW_ENABLE_UART_REPL (1) + +#define MICROPY_HW_I2C0_SCL (22) +#define MICROPY_HW_I2C0_SDA (21) + +#define MICROPY_HW_SPI1_SCK (18) +#define MICROPY_HW_SPI1_MOSI (23) +#define MICROPY_HW_SPI1_MISO (19) diff --git a/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/pins.csv b/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/pins.csv new file mode 100644 index 0000000000..d37c51af8f --- /dev/null +++ b/ports/esp32/boards/SPARKFUN_IOT_REDBOARD_ESP32/pins.csv @@ -0,0 +1,22 @@ +TX,GPIO1 +RX,GPIO3 +ALERT,GPIO4 +TCK,GPIO13 +TMS,GPIO14 +CS,GPIO5 +PICO,GPIO23 +POCI,GPIO19 +SCK,GPIO18 +SDA,GPIO21 +SCL,GPIO22 +A0,GPIO36 +A3,GPIO39 +A4,GPIO32 +A5,GPIO33 +A6,GPIO34 +A7,GPIO35 +LED,GPIO18 +LED_BLUE,GPIO18 +BLUE_LED,GPIO18 +RGB_LED,GPIO2 +NEOPIXEL,GPIO2 diff --git a/ports/esp32/boards/UM_FEATHERS2/sdkconfig.board b/ports/esp32/boards/UM_FEATHERS2/sdkconfig.board index 9ab58f215f..162de0da14 100644 --- a/ports/esp32/boards/UM_FEATHERS2/sdkconfig.board +++ b/ports/esp32/boards/UM_FEATHERS2/sdkconfig.board @@ -3,11 +3,6 @@ CONFIG_ESPTOOLPY_FLASHFREQ_80M=y CONFIG_SPIRAM_MEMTEST= -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-16MiB.csv" - # LWIP CONFIG_LWIP_LOCAL_HOSTNAME="UMFeatherS2" # end of LWIP diff --git a/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board b/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board index 3ca0c4b243..3092e35598 100644 --- a/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board +++ b/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board @@ -1,12 +1,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB= -CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-16MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMFeatherS3" diff --git a/ports/esp32/boards/UM_FEATHERS3NEO/sdkconfig.board b/ports/esp32/boards/UM_FEATHERS3NEO/sdkconfig.board index d0355a94dc..25b8d7689d 100644 --- a/ports/esp32/boards/UM_FEATHERS3NEO/sdkconfig.board +++ b/ports/esp32/boards/UM_FEATHERS3NEO/sdkconfig.board @@ -3,11 +3,6 @@ CONFIG_ESPTOOLPY_FLASHFREQ_80M=y CONFIG_ESPTOOLPY_AFTER_NORESET=y CONFIG_SPIRAM_MEMTEST= -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMFeatherS3Neo" diff --git a/ports/esp32/boards/UM_NANOS3/sdkconfig.board b/ports/esp32/boards/UM_NANOS3/sdkconfig.board index 2a39c64337..e06f7a4245 100644 --- a/ports/esp32/boards/UM_NANOS3/sdkconfig.board +++ b/ports/esp32/boards/UM_NANOS3/sdkconfig.board @@ -1,12 +1,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMNanoS3" diff --git a/ports/esp32/boards/UM_OMGS3/sdkconfig.board b/ports/esp32/boards/UM_OMGS3/sdkconfig.board index 84a8ce449e..8a0bf0b13a 100644 --- a/ports/esp32/boards/UM_OMGS3/sdkconfig.board +++ b/ports/esp32/boards/UM_OMGS3/sdkconfig.board @@ -2,12 +2,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y CONFIG_ESPTOOLPY_AFTER_NORESET=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMOMGS3" diff --git a/ports/esp32/boards/UM_PROS3/sdkconfig.board b/ports/esp32/boards/UM_PROS3/sdkconfig.board index 5752e03e60..75ca58d80b 100644 --- a/ports/esp32/boards/UM_PROS3/sdkconfig.board +++ b/ports/esp32/boards/UM_PROS3/sdkconfig.board @@ -1,12 +1,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB= -CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-16MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMProS3" diff --git a/ports/esp32/boards/UM_RGBTOUCH_MINI/sdkconfig.board b/ports/esp32/boards/UM_RGBTOUCH_MINI/sdkconfig.board index ef3f38af47..7d244fdc16 100644 --- a/ports/esp32/boards/UM_RGBTOUCH_MINI/sdkconfig.board +++ b/ports/esp32/boards/UM_RGBTOUCH_MINI/sdkconfig.board @@ -2,12 +2,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y CONFIG_ESPTOOLPY_AFTER_NORESET=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMRGBTouchMini" diff --git a/ports/esp32/boards/UM_TINYC6/sdkconfig.board b/ports/esp32/boards/UM_TINYC6/sdkconfig.board index 7917467b12..213d28d8b4 100644 --- a/ports/esp32/boards/UM_TINYC6/sdkconfig.board +++ b/ports/esp32/boards/UM_TINYC6/sdkconfig.board @@ -2,9 +2,4 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y CONFIG_ESPTOOLPY_AFTER_NORESET=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" diff --git a/ports/esp32/boards/UM_TINYS3/sdkconfig.board b/ports/esp32/boards/UM_TINYS3/sdkconfig.board index d1d19761a0..2474c5fb27 100644 --- a/ports/esp32/boards/UM_TINYS3/sdkconfig.board +++ b/ports/esp32/boards/UM_TINYS3/sdkconfig.board @@ -1,12 +1,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMTinyS3" diff --git a/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board b/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board index 1380e15ce8..10121d235d 100644 --- a/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board +++ b/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board @@ -1,12 +1,7 @@ CONFIG_ESPTOOLPY_FLASHMODE_QIO=y CONFIG_ESPTOOLPY_FLASHFREQ_80M=y -CONFIG_ESPTOOLPY_FLASHSIZE_4MB= -CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y -CONFIG_ESPTOOLPY_FLASHSIZE_16MB= CONFIG_SPIRAM_MEMTEST= -CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MiB.csv" CONFIG_LWIP_LOCAL_HOSTNAME="UMTinyWATCHS3" diff --git a/ports/esp32/boards/sdkconfig.base b/ports/esp32/boards/sdkconfig.base index 530db42711..30740af434 100644 --- a/ports/esp32/boards/sdkconfig.base +++ b/ports/esp32/boards/sdkconfig.base @@ -50,7 +50,6 @@ CONFIG_ESP_SYSTEM_MEMPROT_FEATURE=n CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=2 CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP=n -CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK=y # UDP CONFIG_LWIP_PPP_SUPPORT=y @@ -98,7 +97,7 @@ CONFIG_ULP_COPROC_RESERVE_MEM=2040 # For cmake build CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y CONFIG_PARTITION_TABLE_CUSTOM=y -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-4MiB.csv" +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-4MiBplus.csv" # To reduce iRAM usage CONFIG_ESP32_WIFI_IRAM_OPT=n @@ -118,7 +117,6 @@ CONFIG_ADC_CAL_LUT_ENABLE=y CONFIG_UART_ISR_IN_IRAM=y # IDF 5 deprecated -CONFIG_ADC_SUPPRESS_DEPRECATE_WARN=y CONFIG_RMT_SUPPRESS_DEPRECATE_WARN=y CONFIG_ETH_USE_SPI_ETHERNET=y |