diff options
Diffstat (limited to 'docs/esp8266/tutorial')
| -rw-r--r-- | docs/esp8266/tutorial/onewire.rst | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/docs/esp8266/tutorial/onewire.rst b/docs/esp8266/tutorial/onewire.rst index c90044b7a8..c2cede9e38 100644 --- a/docs/esp8266/tutorial/onewire.rst +++ b/docs/esp8266/tutorial/onewire.rst @@ -6,19 +6,19 @@ The 1-wire bus is a serial bus that uses just a single wire for communication is a very popular 1-wire device, and here we show how to use the onewire module to read from such a device. -For the following code to work you need to have at least one DS18B20 temperature +For the following code to work you need to have at least one DS18S20 or DS18B20 temperature sensor with its data line connected to GPIO12. You must also power the sensors and connect a 4.7k Ohm resistor between the data pin and the power pin. :: import time import machine - import onewire + import onewire, ds18x20 # the device is on GPIO12 dat = machine.Pin(12) # create the onewire object - ds = onewire.DS18B20(onewire.OneWire(dat)) + ds = ds18x20.DS18X20(onewire.OneWire(dat)) # scan for devices on the bus roms = ds.scan() |