summaryrefslogtreecommitdiffstatshomepage
diff options
context:
space:
mode:
Diffstat
-rw-r--r--stmhal/boards/LIMIFROG/mpconfigboard.h7
-rw-r--r--stmhal/boards/NUCLEO_F767ZI/mpconfigboard.h5
-rw-r--r--stmhal/boards/NUCLEO_L476RG/mpconfigboard.h4
-rw-r--r--stmhal/boards/STM32F769DISC/mpconfigboard.h5
-rw-r--r--stmhal/boards/STM32F7DISC/mpconfigboard.h10
-rw-r--r--stmhal/boards/STM32L476DISC/mpconfigboard.h7
-rw-r--r--stmhal/i2c.c47
7 files changed, 37 insertions, 48 deletions
diff --git a/stmhal/boards/LIMIFROG/mpconfigboard.h b/stmhal/boards/LIMIFROG/mpconfigboard.h
index 95fd6bf506..d04634ac38 100644
--- a/stmhal/boards/LIMIFROG/mpconfigboard.h
+++ b/stmhal/boards/LIMIFROG/mpconfigboard.h
@@ -37,13 +37,6 @@ void LIMIFROG_board_early_init(void);
#define MICROPY_HW_I2C1_SDA (pin_B9)
#define MICROPY_HW_I2C2_SCL (pin_B10)
#define MICROPY_HW_I2C2_SDA (pin_B11)
-// We use an array of baudrates and corresponding TIMINGR values.
-//
-// The value 0x90112626 was obtained from the DISCOVERY_I2C1_TIMING constant
-// defined in the STM32L4Cube file Drivers/BSP/STM32L476G-Discovery/stm32l476g_discovery.h
-#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x90112626}}
-#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000
-#define MICROPY_HW_I2C_BAUDRATE_MAX 100000
// SPI busses
#define MICROPY_HW_SPI1_NSS (pin_A4)
diff --git a/stmhal/boards/NUCLEO_F767ZI/mpconfigboard.h b/stmhal/boards/NUCLEO_F767ZI/mpconfigboard.h
index 647525384f..cafea136f9 100644
--- a/stmhal/boards/NUCLEO_F767ZI/mpconfigboard.h
+++ b/stmhal/boards/NUCLEO_F767ZI/mpconfigboard.h
@@ -52,11 +52,6 @@
#define MICROPY_HW_I2C3_SCL (pin_H7)
#define MICROPY_HW_I2C3_SDA (pin_H8)
-// TODO These should go in i2c.c
-#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x40912732}}
-#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000
-#define MICROPY_HW_I2C_BAUDRATE_MAX 100000
-
// SPI
#define MICROPY_HW_SPI3_NSS (pin_A4)
#define MICROPY_HW_SPI3_SCK (pin_B3)
diff --git a/stmhal/boards/NUCLEO_L476RG/mpconfigboard.h b/stmhal/boards/NUCLEO_L476RG/mpconfigboard.h
index 181580b147..f2474619fe 100644
--- a/stmhal/boards/NUCLEO_L476RG/mpconfigboard.h
+++ b/stmhal/boards/NUCLEO_L476RG/mpconfigboard.h
@@ -21,10 +21,6 @@
#define MICROPY_HW_UART_REPL PYB_UART_2
#define MICROPY_HW_UART_REPL_BAUD 115200
-#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x90112626}}
-#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000
-#define MICROPY_HW_I2C_BAUDRATE_MAX 100000
-
#define MICROPY_HW_FLASH_LATENCY FLASH_LATENCY_4
// I2C busses
diff --git a/stmhal/boards/STM32F769DISC/mpconfigboard.h b/stmhal/boards/STM32F769DISC/mpconfigboard.h
index 72465c7994..50b9c1618f 100644
--- a/stmhal/boards/STM32F769DISC/mpconfigboard.h
+++ b/stmhal/boards/STM32F769DISC/mpconfigboard.h
@@ -43,11 +43,6 @@
#define MICROPY_HW_I2C3_SCL (pin_H7)
#define MICROPY_HW_I2C3_SDA (pin_H8)
-// TODO These should go in i2c.c
-#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x40912732}}
-#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000
-#define MICROPY_HW_I2C_BAUDRATE_MAX 100000
-
// SPI
#define MICROPY_HW_SPI2_NSS (pin_A11)
#define MICROPY_HW_SPI2_SCK (pin_A12)
diff --git a/stmhal/boards/STM32F7DISC/mpconfigboard.h b/stmhal/boards/STM32F7DISC/mpconfigboard.h
index 38665055f1..44a39c0a1a 100644
--- a/stmhal/boards/STM32F7DISC/mpconfigboard.h
+++ b/stmhal/boards/STM32F7DISC/mpconfigboard.h
@@ -51,16 +51,6 @@ void STM32F7DISC_board_early_init(void);
#define MICROPY_HW_I2C3_SCL (pin_H7)
#define MICROPY_HW_I2C3_SDA (pin_H8)
-// The STM32F7 uses a TIMINGR register which is configured using an Excel
-// Spreadsheet from AN4235: http://www.st.com/web/en/catalog/tools/PF258335
-// We use an array of baudrates and corresponding TIMINGR values.
-//
-// The value 0x40912732 was obtained from the DISCOVERY_I2Cx_TIMING constant
-// defined in the STM32F7Cube file Drivers/BSP/STM32F746G-Discovery/stm32f7456g_discovery.h
-#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x40912732}}
-#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000
-#define MICROPY_HW_I2C_BAUDRATE_MAX 100000
-
// SPI
#define MICROPY_HW_SPI2_NSS (pin_I0)
#define MICROPY_HW_SPI2_SCK (pin_I1)
diff --git a/stmhal/boards/STM32L476DISC/mpconfigboard.h b/stmhal/boards/STM32L476DISC/mpconfigboard.h
index a93b486c68..258a86b606 100644
--- a/stmhal/boards/STM32L476DISC/mpconfigboard.h
+++ b/stmhal/boards/STM32L476DISC/mpconfigboard.h
@@ -47,13 +47,6 @@ void STM32L476DISC_board_early_init(void);
#define MICROPY_HW_I2C1_SDA (pin_B7)
#define MICROPY_HW_I2C2_SCL (pin_B10)
#define MICROPY_HW_I2C2_SDA (pin_B11)
-// We use an array of baudrates and corresponding TIMINGR values.
-//
-// The value 0x90112626 was obtained from the DISCOVERY_I2C1_TIMING constant
-// defined in the STM32L4Cube file Drivers/BSP/STM32L476G-Discovery/stm32l476g_discovery.h
-#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x90112626}}
-#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000
-#define MICROPY_HW_I2C_BAUDRATE_MAX 100000
// SPI busses
#define MICROPY_HW_SPI2_NSS (pin_D0)
diff --git a/stmhal/i2c.c b/stmhal/i2c.c
index 412a8e3638..e818ec380f 100644
--- a/stmhal/i2c.c
+++ b/stmhal/i2c.c
@@ -37,14 +37,6 @@
#include "dma.h"
#include "i2c.h"
-#if !defined(MICROPY_HW_I2C_BAUDRATE_DEFAULT)
-#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 400000
-#endif
-
-#if !defined(MICROPY_HW_I2C_BAUDRATE_MAX)
-#define MICROPY_HW_I2C_BAUDRATE_MAX 400000
-#endif
-
/// \moduleref pyb
/// \class I2C - a two-wire serial protocol
///
@@ -134,10 +126,42 @@ const pyb_i2c_obj_t pyb_i2c_obj[] = {
#endif
};
-#if defined(MICROPY_HW_I2C_BAUDRATE_TIMING)
+#if defined(MCU_SERIES_F7) || defined(MCU_SERIES_L4)
+
// The STM32F0, F3, F7 and L4 use a TIMINGR register rather than ClockSpeed and
// DutyCycle.
+#if defined(STM32F746xx)
+
+// The value 0x40912732 was obtained from the DISCOVERY_I2Cx_TIMING constant
+// defined in the STM32F7Cube file Drivers/BSP/STM32F746G-Discovery/stm32f7456g_discovery.h
+#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x40912732}}
+#define MICROPY_HW_I2C_BAUDRATE_DEFAULT (100000)
+#define MICROPY_HW_I2C_BAUDRATE_MAX (100000)
+
+#elif defined(STM32F767xx) || defined(STM32F769xx)
+
+// These timing values are for f_I2CCLK=54MHz and are only approximate
+#define MICROPY_HW_I2C_BAUDRATE_TIMING { \
+ {100000, 0xb0420f13}, \
+ {400000, 0x70330309}, \
+ {1000000, 0x50100103}, \
+ }
+#define MICROPY_HW_I2C_BAUDRATE_DEFAULT (400000)
+#define MICROPY_HW_I2C_BAUDRATE_MAX (1000000)
+
+#elif defined(MCU_SERIES_L4)
+
+// The value 0x90112626 was obtained from the DISCOVERY_I2C1_TIMING constant
+// defined in the STM32L4Cube file Drivers/BSP/STM32L476G-Discovery/stm32l476g_discovery.h
+#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x90112626}}
+#define MICROPY_HW_I2C_BAUDRATE_DEFAULT (100000)
+#define MICROPY_HW_I2C_BAUDRATE_MAX (100000)
+
+#else
+#error "no I2C timings for this MCU"
+#endif
+
STATIC const struct {
uint32_t baudrate;
uint32_t timing;
@@ -167,6 +191,9 @@ uint32_t i2c_get_baudrate(I2C_InitTypeDef *init) {
#else
+#define MICROPY_HW_I2C_BAUDRATE_DEFAULT (400000)
+#define MICROPY_HW_I2C_BAUDRATE_MAX (400000)
+
STATIC void i2c_set_baudrate(I2C_InitTypeDef *init, uint32_t baudrate) {
init->ClockSpeed = baudrate;
init->DutyCycle = I2C_DUTYCYCLE_16_9;
@@ -176,7 +203,7 @@ uint32_t i2c_get_baudrate(I2C_InitTypeDef *init) {
return init->ClockSpeed;
}
-#endif // MICROPY_HW_I2C_BAUDRATE_TIMING
+#endif
void i2c_init0(void) {
// reset the I2C1 handles
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-02 15:07:23 +0000