diff options
| -rw-r--r-- | ports/esp32/README.md | 7 |
1 files changed, 3 insertions, 4 deletions
diff --git a/ports/esp32/README.md b/ports/esp32/README.md index 4524696899..c37213b303 100644 --- a/ports/esp32/README.md +++ b/ports/esp32/README.md @@ -28,7 +28,7 @@ manage the ESP32 microcontroller, as well as a way to manage the required build environment and toolchains needed to build the firmware. The ESP-IDF changes quickly and MicroPython only supports certain versions. -Currently MicroPython supports v4.0.2, v4.1.1 and v4.2, +Currently MicroPython supports v4.0.2, v4.1.1, v4.2.2, v4.3.2 and v4.4, although other IDF v4 versions may also work. To install the ESP-IDF the full instructions can be found at the @@ -50,7 +50,7 @@ To check out a copy of the IDF use git clone: $ git clone -b v4.0.2 --recursive https://github.com/espressif/esp-idf.git ``` -You can replace `v4.0.2` with `v4.1.1` or `v4.2` or any other supported version. +You can replace `v4.0.2` with `v4.2.2` or `v4.4` or any other supported version. (You don't need a full recursive clone; see the `ci_esp32_setup` function in `tools/ci.sh` in this repository for more detailed set-up commands.) @@ -77,8 +77,7 @@ The `install.sh` step only needs to be done once. You will need to source **Note:** If you are building MicroPython for the ESP32-S2, ESP32-C3 or ESP32-S3, please ensure you are using the following required IDF versions: -- ESP32-S3 currently requires latest `master`, but eventually `v4.4` or later when - it's available. +- ESP32-S3 currently requires `v4.4` or later. - ESP32-S2 and ESP32-C3 require `v4.3.1` or later. Building the firmware |