docs/rp2: Add network information to the rp2 quickref.

Some rp2 boards include WiFi, at least with the very popular Pico W and
Pico 2 W.  New users frequently ask how to set up WiFi and are confused
because it's not covered in the quickref.

This commit adds the wlan section, copied and modified with notes from the
ESP32 quickref.

Signed-off-by: Matt Trentini <matt.trentini@gmail.com>

1 files changed, 51 insertions, 0 deletions

diff --git a/docs/rp2/quickref.rst b/docs/rp2/quickref.rst
index 6be3180500..23071d7721 100644
--- a/docs/rp2/quickref.rst
+++ b/docs/rp2/quickref.rst
@@ -55,6 +55,57 @@ The :mod:`rp2` module::
 
     import rp2
 
+Networking
+----------
+
+WLAN
+^^^^
+
+.. note::
+   This section applies only to devices that include WiFi support, such as the `Pico W`_ and `Pico 2 W`_.
+
+The :class:`network.WLAN` class in the :mod:`network` module::
+
+    import network
+
+    wlan = network.WLAN()       # create station interface (the default, see below for an access point interface)
+    wlan.active(True)           # activate the interface
+    wlan.scan()                 # scan for access points
+    wlan.isconnected()          # check if the station is connected to an AP
+    wlan.connect('ssid', 'key') # connect to an AP
+    wlan.config('mac')          # get the interface's MAC address
+    wlan.ipconfig('addr4')      # get the interface's IPv4 addresses
+
+    ap = network.WLAN(network.WLAN.IF_AP) # create access-point interface
+    ap.config(ssid='RP2-AP')              # set the SSID of the access point
+    ap.config(max_clients=10)             # set how many clients can connect to the network
+    ap.active(True)                       # activate the interface
+
+A useful function for connecting to your local WiFi network is::
+
+    def do_connect():
+        import machine, network
+        wlan = network.WLAN()
+        wlan.active(True)
+        if not wlan.isconnected():
+            print('connecting to network...')
+            wlan.connect('ssid', 'key')
+            while not wlan.isconnected():
+                machine.idle()
+        print('network config:', wlan.ipconfig('addr4'))
+
+Once the network is established the :mod:`socket <socket>` module can be used
+to create and use TCP/UDP sockets as usual, and the ``requests`` module for
+convenient HTTP requests.
+
+After a call to ``wlan.connect()``, the device will by default retry to connect
+**forever**, even when the authentication failed or no AP is in range.
+``wlan.status()`` will return ``network.STAT_CONNECTING`` in this state until a
+connection succeeds or the interface gets disabled.
+
+.. _Pico W: https://www.raspberrypi.com/documentation/microcontrollers/pico-series.html#picow-technical-specification
+.. _Pico 2 W: https://www.raspberrypi.com/documentation/microcontrollers/pico-series.html#pico2w-technical-specification
+
 Delay and timing
 ----------------