1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
|
'''
UART test for the CC3200 based boards.
UART0 and UART1 must be connected together for this test to pass.
'''
from pyb import UART
from pyb import Pin
import os
import pyb
import time
machine = os.uname().machine
if 'LaunchPad' in machine:
uart_id_range = range(0, 2)
uart_pins = [[('GP12', 'GP13'), ('GP12', 'GP13', 'GP7', 'GP6')], [('GP16', 'GP17'), ('GP16', 'GP17', 'GP7', 'GP6')]]
elif 'WiPy' in machine:
uart_id_range = range(0, 2)
uart_pins = [[('GP12', 'GP13'), ('GP12', 'GP13', 'GP7', 'GP6')], [('GP16', 'GP17'), ('GP16', 'GP17', 'GP7', 'GP6')]]
else:
raise Exception('Board not supported!')
# just in case we have stdio duplicated on any of the uarts
pyb.repl_uart(None)
for uart_id in uart_id_range:
uart = UART(uart_id, 38400)
print(uart)
uart.init(57600, 8, None, 1, pins=uart_pins[uart_id][0])
uart.init(baudrate=9600, stop=2, parity=UART.EVEN, pins=uart_pins[uart_id][1])
uart.init(baudrate=115200, parity=UART.ODD, stop=0, pins=uart_pins[uart_id][0])
uart = UART(baudrate=1000000)
uart.sendbreak()
uart = UART(baudrate=1000000)
uart = UART()
print(uart)
uart = UART(baudrate=38400, pins=('GP12', 'GP13'))
print(uart)
uart = UART(pins=('GP12', 'GP13'))
print(uart)
uart = UART(pins=(None, 'GP17'))
print(uart)
uart = UART(baudrate=57600, pins=('GP16', 'GP17'))
print(uart)
# now it's time for some loopback tests between the uarts
uart0 = UART(0, 1000000, pins=uart_pins[0][0])
print(uart0)
uart1 = UART(1, 1000000, pins=uart_pins[1][0])
print(uart1)
print(uart0.write(b'123456') == 6)
print(uart1.read() == b'123456')
print(uart1.write(b'123') == 3)
print(uart0.read(1) == b'1')
print(uart0.read(2) == b'23')
print(uart0.read() == b'')
uart0.write(b'123')
buf = bytearray(3)
print(uart1.readinto(buf, 1) == 1)
print(buf)
print(uart1.readinto(buf) == 2)
print(buf)
# try initializing without the id
uart0 = UART(baudrate=1000000, pins=uart_pins[0][0])
uart0.write(b'1234567890')
time.sleep_ms(2) # because of the fifo interrupt levels
print(uart1.any() == 10)
print(uart1.readline() == b'1234567890')
print(uart1.any() == 0)
uart0.write(b'1234567890')
print(uart1.readall() == b'1234567890')
# tx only mode
uart0 = UART(0, 1000000, pins=('GP12', None))
print(uart0.write(b'123456') == 6)
print(uart1.read() == b'123456')
print(uart1.write(b'123') == 3)
print(uart0.read() == b'')
# rx only mode
uart0 = UART(0, 1000000, pins=(None, 'GP13'))
print(uart0.write(b'123456') == 6)
print(uart1.read() == b'')
print(uart1.write(b'123') == 3)
print(uart0.read() == b'123')
# leave pins as they were (rx only mode)
uart0 = UART(0, 1000000, pins=None)
print(uart0.write(b'123456') == 6)
print(uart1.read() == b'')
print(uart1.write(b'123') == 3)
print(uart0.read() == b'123')
# no pin assignemnt
uart0 = UART(0, 1000000, pins=(None, None))
print(uart0.write(b'123456789') == 9)
print(uart1.read() == b'')
print(uart1.write(b'123456789') == 9)
print(uart0.read() == b'')
print(Pin.board.GP12)
print(Pin.board.GP13)
# check for memory leaks...
for i in range (0, 1000):
uart0 = UART(0, 1000000)
uart1 = UART(1, 1000000)
# next ones must raise
try:
UART(0, 9600, parity=None, pins=('GP12', 'GP13', 'GP7'))
except Exception:
print('Exception')
try:
UART(0, 9600, parity=UART.ODD, pins=('GP12', 'GP7'))
except Exception:
print('Exception')
uart0 = UART(0, 1000000)
uart0.deinit()
try:
uart0.any()
except Exception:
print('Exception')
try:
uart0.read()
except Exception:
print('Exception')
try:
uart0.write('abc')
except Exception:
print('Exception')
try:
uart0.sendbreak('abc')
except Exception:
print('Exception')
try:
UART(2, 9600)
except Exception:
print('Exception')
for uart_id in uart_id_range:
uart = UART(uart_id, 1000000)
uart.deinit()
# test printing an unitialized uart
print(uart)
# initialize it back and check that it works again
uart.init(115200)
print(uart)
uart.read()
|
