1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
|
/*
* This file is part of the Micro Python project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013, 2014 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// these states correspond to values from query_irq, enable_irq and disable_irq
#define IRQ_STATE_DISABLED (0x00000001)
#define IRQ_STATE_ENABLED (0x00000000)
static inline mp_uint_t query_irq(void) {
return __get_PRIMASK();
}
// enable_irq and disable_irq are defined inline in mpconfigport.h
MP_DECLARE_CONST_FUN_OBJ(pyb_wfi_obj);
MP_DECLARE_CONST_FUN_OBJ(pyb_disable_irq_obj);
MP_DECLARE_CONST_FUN_OBJ(pyb_enable_irq_obj);
// IRQ priority definitions.
// Lower number implies higher interrupt priority.
#define IRQ_PRI_CAN 0x7
#define IRQ_SUBPRI_CAN 0x0
#define IRQ_PRI_DMA 0x6
#define IRQ_SUBPRI_DMA 0x0
#define IRQ_PRI_EXTINT 0xf
#define IRQ_SUBPRI_EXTINT 0xf
// Flash IRQ must be higher priority than interrupts of all those components
// that rely on the flash storage.
#define IRQ_PRI_FLASH 0x1
#define IRQ_SUBPRI_FLASH 0x1
#define IRQ_PRI_OTG_FS 0x6
#define IRQ_SUBPRI_OTG_FS 0x0
#define IRQ_PRI_OTG_HS 0x6
#define IRQ_SUBPRI_OTG_HS 0x0
// PENDSV should be at the lowst priority so that other interrupts complete
// before exception is raised.
#define IRQ_PRI_PENDSV 0xf
#define IRQ_SUBPRI_PENDSV 0xf
#define IRQ_PRI_RTC_WKUP 0xf
#define IRQ_SUBPRI_RTC_WKUP 0xf
#define IRQ_PRI_TIM3 0x6
#define IRQ_SUBPRI_TIM3 0x0
#define IRQ_PRI_TIM5 0x6
#define IRQ_SUBPRI_TIM5 0x0
// Interrupt priority for non-special timers.
#define IRQ_PRI_TIMX 0xe
#define IRQ_SUBPRI_TIMX 0xe
#define IRQ_PRI_UART 0xd
#define IRQ_SUBPRI_UART 0xd
|
