stmhal/boards/openocd_stm32f4.cfg


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42

# This script configures OpenOCD for use with an ST-Link V2 programmer/debugger
# and an STM32F4 target microcontroller.
#
# To flash your firmware:
#
#    $ openocd -f openocd_stm32f4.cfg \
#        -c "stm_flash build-BOARD/firmware0.bin build-BOARD/firmware1.bin"
#
# For a gdb server on port 3333:
#
#    $ openocd -f openocd_stm32f4.cfg


source [find interface/stlink-v2.cfg]
transport select hla_swd
source [find target/stm32f4x.cfg]
reset_config srst_only
init

proc stm_flash { BIN0 BIN1 } {
    reset halt
    sleep 100
    wait_halt 2
    flash write_image erase $BIN0 0x08000000
    sleep 100
    verify_image $BIN0 0x08000000
    sleep 100
    flash write_image erase $BIN1 0x08020000
    sleep 100
    verify_image $BIN1 0x08020000
    sleep 100
    reset run
    shutdown
}

proc stm_erase {} {
    reset halt
    sleep 100
    stm32f4x mass_erase 0
    sleep 100
    shutdown
}