1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
|
.. _quickref_:
Quick reference for the WiPy
============================
.. image:: https://raw.githubusercontent.com/wipy/wipy/master/docs/PinOUT.png
:alt: WiPy pinout and alternate functions table
:width: 800px
General board control
---------------------
See :mod:`pyb`. ::
import pyb
help(pyb) # display all members from the pyb module
pyb.delay(50) # wait 50 milliseconds
pyb.millis() # number of milliseconds since boot-up
pyb.freq() # get the CPU frequency
pyb.unique_id() # return the 6-byte unique id of the board (the WiPy's MAC address)
Pins and GPIO
-------------
See :ref:`pyb.Pin <pyb.Pin>`. ::
from pyb import Pin
# initialize GPIO2 in gpio mode (af=0) and make it an output
p_out = Pin('GPIO2', af=0, mode=Pin.OUT)
p_out.high()
p_out.low()
p_out.toggle()
# make GPIO1 an input with the pull-up enabled
p_in = Pin('GPIO1', af = 0, mode=Pin.IN, type = Pin.STD_PU)
p_in.value() # get value, 0 or 1
Timers
------
See :ref:`pyb.Timer <pyb.Timer>` and :ref:`pyb.Pin <pyb.Pin>`. ::
from pyb import Timer
from pyb import Pin
tim = Timer(1, mode=Timer.PERIODIC)
tim_a = tim.channel(Timer.A, freq=1000)
tim_a.time() # get the value in microseconds
tim_a.freq(1) # 1 Hz
p_out = Pin('GPIO2', af=0, mode=Pin.OUT)
tim_a.callback(handler=lambda t: p_out.toggle())
PWM (pulse width modulation)
----------------------------
See :ref:`pyb.Pin <pyb.Pin>` and :ref:`pyb.Timer <pyb.Timer>`. ::
from pyb import Timer
from pyb import Pin
# assign GPIO25 to alternate function 5 (PWM)
p_out = Pin('GPIO25', af=9, type=Pin.STD)
# timer 2 in PWM mode and width must be 16 buts
tim = Timer(2, mode=Timer.PWM, width=16)
# enable channel A @1KHz with a 50% duty cycle
tim_a = tim.channel(Timer.A, freq=1000, duty_cycle=50)
ADC (analog to digital conversion)
----------------------------------
See :ref:`pyb.ADC <pyb.ADC>`. ::
from pyb import ADC
adc = ADC(1)
adc.read() # read value, 0-4095
UART (serial bus)
-----------------
See :ref:`pyb.Pin <pyb.Pin>` and :ref:`pyb.UART <pyb.UART>`. ::
from pyb import Pin, UART
# first assign TX and RX to the correct pins
Pin('GPIO1', af=3, mode=Pin.STD_PU) # TX
Pin('GPIO2', af=3, mode=Pin.STD_PU) # RX
uart = UART(1, 9600)
uart.write('hello')
uart.read(5) # read up to 5 bytes
SPI bus
-------
See :ref:`pyb.Pin <pyb.Pin>` and :ref:`pyb.SPI <pyb.SPI>`. ::
from pyb import Pin, SPI
# first assign CLK, MISO, MOSI, CS to the correct pins
Pin('GPIO14', af=7, mode=Pin.STD) # CLK
Pin('GPIO15', af=7, mode=Pin.STD) # MISO
Pin('GPIO16', af=7, mode=Pin.STD) # MOSI
Pin('GPIO17', af=7, mode=Pin.STD) # NSS/CS
# configure the SPI master @ 2MHz
spi = SPI(1, SPI.MASTER, baudrate=200000, polarity=0, phase=0)
spi.send('hello')
spi.recv(5) # receive 5 bytes on the bus
spi.send_recv('hello') # send a receive 5 bytes
I2C bus
-------
See :ref:`pyb.Pin <pyb.Pin>` and :ref:`pyb.I2C <pyb.I2C>`. ::
from pyb import Pin, I2C
# first assign SCL and SDA to the correct pins
Pin('GPIO23', af=9, mode=Pin.STD_PU) # SCL
Pin('GPIO24', af=9, mode=Pin.STD_PU) # SDA
# configure the I2C bus
i2c = I2C(1, I2C.MASTER, baudrate=100000)
i2c.scan() # returns list of slave addresses
i2c.send('hello', 0x42) # send 5 bytes to slave with address 0x42
i2c.recv(5, 0x42) # receive 5 bytes from slave
i2c.mem_read(2, 0x42, 0x10) # read 2 bytes from slave 0x42, slave memory 0x10
i2c.mem_write('xy', 0x42, 0x10) # write 2 bytes to slave 0x42, slave memory 0x10
Watchdog timer (WDT)
--------------------
See :ref:`pyb.WDT <pyb.WDT>`. ::
from pyb import WDT
# enable the WDT with a timeout of 5s (1s is the minimum)
wdt = WDT(5000)
wdt.kick()
Real time clock (RTC)
---------------------
See :ref:`pyb.RTC <pyb.RTC>` and ``pyb.Sleep``. ::
from pyb import RTC, Sleep
rtc = pyb.RTC()
rtc.datetime((2014, 5, 1, 4, 13, 0, 0, 0))
print(rtc.datetime())
def some_handler (rtc_obj):
# trigger the callback again in 30s
rtc_obj.callback(value=30000, handler=some_handler)
# create a RTC alarm that expires in 30s
rtc.callback(value=30000, handler=some_handler, wakes=Sleep.SUSPENDED)
# go into suspended mode waiting for the RTC alarm to expire and wake us up
Sleep.suspend()
SD card
-------
See :ref:`pyb.SD <pyb.SD>`. ::
from pyb import SD
# SD card pins need special configuration so we pass 'em to the constructor
# data pin, data af, clock pin, clock af, cmd pin, cmd af
sd = pyb.SD('GPIO15', 8, 'GPIO10', 6, 'GPIO11', 6)
sd.enable()
WLAN (WiFi)
-----------
See :ref:`network.WLAN <network.WLAN>` and ``pyb.Sleep``. ::
from network import WLAN
from pyb import Sleep
# configure the WLAN subsystem in station mode (the default is AP)
wifi = WLAN(WLAN.STA)
# go for fixed IP settings
wifi.ifconfig('192.168.0.107', '255.255.255.0', '192.168.0.1', '8.8.8.8')
wifi.scan() # scan for available netrworks
wifi.connect(ssid='mynetwork', security=2, key='mynetworkkey')
while not wifi.isconnected():
pass
print(wifi.ifconfig())
# enable wake on WLAN
wifi.callback(wakes=Sleep.SUSPENDED)
# go to sleep
Sleep.suspend()
# now, connect to the FTP or the Telnet server and the WiPy will wake-up
Sleep and power modes control
-----------------------------
See ``pyb.Sleep``. ::
from pyb import Sleep
Sleep.idle() # lowest sleep mode (~12mA), any interrupts wakes it up
Sleep.suspend() # everything except for WLAN is powered down (~950uA)
# wakes from Pin, RTC or WLAN
Sleep.hibernate() # deepest sleep mode, MCU starts from reset. Wakes from Pin and RTC.
Heart beat LED
--------------
See :ref:`pyb.HeartBeat <pyb.HeartBeat>`. ::
from pyb import HeartBeat
# disable the heart beat indication (you are free to use this LED connected to GPIO25)
HeartBeat().disable()
# enable the heart beat again
HeartBeat().enable()
|
