summaryrefslogtreecommitdiffstatshomepage
path: root/esp8266/scripts
Commit message (Collapse)AuthorAge
* esp8266: Switch webrepl to use frozen bytecode.Paul Sokolovsky2016-07-02
|
* esp8266: Switch webrepl_setup to use frozen bytecode.Paul Sokolovsky2016-07-02
|
* esp8266: Explicitly collect garbage in bootstrap scripts.Paul Sokolovsky2016-07-02
| | | | Leads to less fragmentation at teh time user code starts.
* esp8266/websocket_helper.py: Fix typo in debug output.Paul Sokolovsky2016-06-30
|
* esp8266/websocket_helper.py: Avoid extra string allocations.Paul Sokolovsky2016-06-30
|
* esp8266: Enable frozen bytecode, with scripts in modules/ subdir.Damien George2016-06-29
| | | | | | | To start with, the critical scripts _boot.py and flashbdev.py are frozen to improve performance and reduce RAM consumption. Saves about 1000 bytes of heap RAM for a bare boot with filesystem.
* esp8266/scripts/ntptime: Allow to override NTP server.Paul Sokolovsky2016-05-30
| | | | | This is not part of public API, variable name may change, or it can be replaced with a function.
* esp8266: Add dht.py script for high-level control of DHT11/DHT22 sensor.Damien George2016-05-26
| | | | | TODO: should go in a more port-neutral place, like drivers/dht, but at the moment in relies on specific esp module.
* esp8266/scripts/port_diag: Dump network interface IP settings.Paul Sokolovsky2016-05-24
|
* esp8266: Add APA102 serial individually controllable LEDs support.misterdanb2016-05-19
| | | | APA102 is a new "smart LED", similar to WS2812 aka "Neopixel".
* esp8266/scripts/webrepl_setup: Add max password length check.Paul Sokolovsky2016-05-17
| | | | modwebrepl truncates password to 9 chars, and that led people to confusion.
* esp8266/scripts/webrepl_setup: Show password placeholder char.Paul Sokolovsky2016-05-17
| | | | | That was the intent for the initial user setup, but didn't work before due to lwIP issues. Enable now that they're fixed.
* esp8266/scripts/port_diag: Add network diagnostic output.Paul Sokolovsky2016-05-16
|
* esp8266/scripts/webrepl: Add start_foreground() method.Paul Sokolovsky2016-05-08
| | | | Starts WebREPL server in foreground and waits for (single) connection.
* esp8266/scripts/webrepl: Add optional password argument to webrepl.start()Noah Rosamilia2016-05-07
| | | | This commit fixes issue #2045
* esp8266/scripts/: Add fill() to NeoPixelMike Causer2016-05-07
|
* esp8266/scripts/inisetup: Don't start WebREPL on boot in master branch.Paul Sokolovsky2016-05-07
| | | | | | It interferes with running testsuite. master branch should be optimized for development, so any features which interfere with that, would need to be disabled by default.
* esp8266/scripts/: Remove use of pin.PULL_NONE.Paul Sokolovsky2016-05-05
| | | | | This constant is no longer part of hardware API (replaced with just None), and is a default, so not needed in calls.
* esp8266/scripts/ntptime: Add simple NTP client.Paul Sokolovsky2016-05-03
| | | | | .time() returns seconds since MicroPython epoch (2000-01-01 00:00UTC), .settime() sends current system time, assuming UTC timezone.
* esp8266/scripts/neopixel.py: Swap red and green in pixel accessor.Damien George2016-05-03
|
* esp8266/scripts/inisetup: Update for nic.mac() method being gone.Paul Sokolovsky2016-05-03
|
* esp8266/scripts/inisetup: Enable WebREPL auto-start on boot.Paul Sokolovsky2016-05-03
|
* esp8266/scripts/webrepl_setup: Reject too short passwords.Paul Sokolovsky2016-05-02
|
* esp8266/scripts/webrepl: Add "first connection" mode to setup password.Paul Sokolovsky2016-04-30
| | | | | | | | If there's no port_config.py file, or it lacks WEBREPL_PASS variable, "initial setup mode" will be entered on first WebREPLconnection. User will be asked for password, which will be written to port_config.WEBREPL_PASS, and system restarted to work in normal mode with password active.
* esp8266/scripts/webrepl: Switch to using _webrepl object wrapper.Paul Sokolovsky2016-04-30
| | | | Handling of binary protocol is untested on esp8266 so far.
* esp8266/scripts/webrepl: Connection ack prompt is now printed by modwebrepl.Paul Sokolovsky2016-04-30
| | | | After password is checked.
* esp8266/scripts/inisetup: Create default boot.py in filesystem.Paul Sokolovsky2016-04-29
| | | | Currently it pre-imports webrepl, but doesn't start it.
* esp8266/scripts/_boot: builtins is no longer used.Paul Sokolovsky2016-04-29
|
* esp8266/scripts: Move all of initial setup to inisetup module.Paul Sokolovsky2016-04-29
|
* esp8266/scripts/neopixel.py: Remove test function from neopixel driver.Damien George2016-04-28
| | | | It takes up lots of room and isn't needed.
* esp8266/scripts/onewire.py: Simplify and improve 1-wire driver.Damien George2016-04-28
| | | | | | | | | | | Changes are: - added OneWireError exception and used where errors can occur - renamed read/write functions to use same names as C _onewire funcs - read_bytes is now read, write_bytes is now write - add ability to read/write DS18B20 scratch pad - rename start_measure to convert_temp (since that's what it does) - rename get_temp to read_temp (consistency with other read names) - removed test function
* esp8266: Move onewire.py, neopixel.py drivers from tests/ to scripts/.Damien George2016-04-28
|
* esp8266/scripts/webrepl: Add "ws://" to "daemon started at" message.Paul Sokolovsky2016-04-26
| | | | To remind people it's not HTTP.
* esp8266/scripts/flashbdev: Use all available Flash for filesystem.Paul Sokolovsky2016-04-26
| | | | | | All Flash sans firmware at the beginning and 16K SDK param block at the end is used for filesystem (and that's calculated depending on the Flash size).
* esp8266/scripts/webrepl: Print client address for incoming connections.Paul Sokolovsky2016-04-26
|
* esp8266/scripts/webrepl: Print connection address.Paul Sokolovsky2016-04-26
| | | | Based on active network interfaces.
* esp8266/scripts/webrepl: Allow to override port.Paul Sokolovsky2016-04-25
|
* esp8266/scripts/webrepl: Don't start on import.Paul Sokolovsky2016-04-25
| | | | Explicit .start() is required now.
* esp8266/scripts/webrepl: Convert to persistent daemon.Paul Sokolovsky2016-04-25
|
* esp8266/scripts/webrepl: WebREPL based on C-level websocket object.Paul Sokolovsky2016-04-24
|
* esp8266/scripts/websocket_helper: Disable debug output.Paul Sokolovsky2016-04-22
|
* esp8266/scripts/websocket_helper: Module encapsulating handshake sequences.Paul Sokolovsky2016-04-22
|
* esp8266/scripts/flashbdev: Correct bootloader flash size to match real size.Paul Sokolovsky2016-04-20
| | | | | | | | | Flash size as seen by vendor SDK doesn't depend on real size, but rather on a particular value in firmware header, as put there by flash tool. That means it's user responsibility to know what flash size a particular device has, and specify correct parameters during flashing. That's not end user friendly however, so we try to make it "flash and play" by detecting real size vs from-header size mismatch, and correct the header accordingly.
* esp8266/scripts/_boot: Print notice when initial setup is executed.Paul Sokolovsky2016-04-20
|
* esp8266/scripts/flashbdev: Disable debug output/checks.Paul Sokolovsky2016-04-20
|
* esp8266/scripts: Don't try to create filesystem on 512KB devices or less.Paul Sokolovsky2016-04-18
| | | | There's no space for it.
* esp8266/scripts/flashbdev: Use all available space in 1MB FlashROM for FS.Paul Sokolovsky2016-04-18
|
* esp8266/scripts/_boot: Mount block device on "" instead of "/".Damien George2016-04-14
| | | | | | "" is the correct name of the root directory when mounting a device there (as opposed to "/"). One can now do os.listdir('/') and open('/abc'), as well as os.listdir() and open('abc').
* esp8266/scripts/port_diag.py: Module to collect diagnostic info.Paul Sokolovsky2016-04-14
| | | | | A shortcut for users to provide background diagnostic info for bug reports.
* esp8266/scripts/inisetup.py: Use "-" in AP ESSID instead of space.Damien George2016-04-12
|
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-07 14:18:40 +0000