summaryrefslogtreecommitdiffstatshomepage
path: root/.github
Commit message (Collapse)AuthorAge
* qemu-arm: Rework to provide a REPL and run tests via a pty serial port.Damien George2024-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the qemu-arm (and qemu-riscv) port has two build modes: - a simple test that executes a Python string; and - a full test that uses tinytest to embed all tests within the firmware, then executes that and captures the output. This is very different to all the other ports. A difficulty with using tinytest is that with the large number of tests the firmware overflows its virtual flash size. It's also hard to run tests via .mpy files and with the native emitter. Being different to the other ports also means an extra burden on maintenance. This commit reworks the qemu-arm port so that it has a single build target that creates a standard firmware which has a REPL. When run under qemu-system-arm, the REPL acts like any other bare-metal port, complete with soft reset (use machine.reset() to turn it off and exit qemu-system-arm). This approach gives many benefits: - allows playing with a REPL without hardware; - allows running the test suite as it would on a bare-metal board, by making qemu-system-arm redirect the UART serial of the virtual device to a /dev/pts/xx file, and then running run-tests.py against that serial device; - skipping tests is now done via the logic in `run-tests.py` and no longer needs multiple places to define which tests to skip (`tools/tinytest-codegen.py`, `ports/qemu-arm/tests_profile.txt` and also `tests/run-tests.py`); - allows testing/using mpremote with the qemu-arm port. Eventually the qemu-riscv port would have a similar change. Prior to this commit the test results were: 743 tests ok. (121 skipped) With this commit the test results are: 753 tests performed (22673 individual testcases) 753 tests passed 138 tests skipped More tests are skipped because more are included in the run. But overall more tests pass. Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Add CI to run tests against zephyr with qemu.Damien George2024-08-28
| | | | | | | | | | | | | | | With this change, the zephyr port is tested against the standard test suite via the following scheme: - the zephyr port is built with the `qemu_cortex_m3` board and the `prj_minimal.conf` configuration - `qemu-system-arm` runs `zephyr.elf` - the zephyr console is redirected to a pts/pty - `tests/run-tests.py` is run in bare-metal mode against the pts/pty device This allows testing the zephyr port as though it were a physical board attached over a serial port. Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Add RISC-V 64 bits Unix port to CI.Alessandro Gatti2024-07-25
| | | | Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
* tests/run-tests.py: Make Windows test skipping more granular.stijn2024-07-25
| | | | Signed-off-by: stijn <stijn@ignitron.net>
* github/workflows: Improve MSYS2-based CI builds.stijn2024-07-25
| | | | | | | | | | Install the mingw variant of Python since it behaves more like a 'real' Windows CPython than the msys2 variant: os.name == 'nt', not 'posix'. Note that os.sep is still '/' though so we don't actually need to skip the import_file test. This way one single Python version can be used both for running run-tests.py and getting the expected test output. Signed-off-by: stijn <stijn@ignitron.net>
* github/workflows: Use macos-latest for unix macos CI.Damien George2024-07-15
| | | | | | | | | | macos-11.0 is no longer available. With this change in the macos version, some tests which previously failed now pass, and some different tests now fail. Exclude those that fail from the CI until they can be fixed properly. Signed-off-by: Damien George <damien@micropython.org>
* github: Add Pull Request template.Angus Gratton2024-06-26
| | | | | | | | | | | | | Provides pull request submitters with contributor documentation, and prompts them to provide relevant information about testing, and how they came to implement this change. Sections are deliberately small so they don't crowd out the GitHub Pull Request description text field. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>
* github/workflows: Add qemu-riscv port to CI.Alessandro Gatti2024-06-17
| | | | Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
* github/ISSUE_TEMPLATE: Update issue form to remove checklist generation.Angus Gratton2024-05-31
| | | | | | | | | | | | | | Update to the issue forms added earlier this year, that seem to generally be working well. Improvements in this commit: - No longer generates TODO checklists in new issues. - Issue bodies (and therefore email previews) no longer start with the same fixed checklist text for each new issue. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>
* github/workflows: Run code size workflow on shared or port code changes.Damien George2024-04-22
| | | | | | To get more insight to firmware size changes when code changes. Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Update coverage workflow to codecov-action@v4.J. Neuschäfer2024-04-20
| | | | | | Fixes: https://github.com/micropython/micropython/issues/14340 Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
* github/workflows: Add Biome workflow for JavaScript formatting/linting.Damien George2024-03-22
| | | | | | Enable Biome on all of webassembly port and tests. Signed-off-by: Damien George <damien@micropython.org>
* tools/ci.sh: Add Arduino GIGA to stm32 CI build.iabdalkader2024-03-15
| | | | Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
* all: Prune trailing whitespace.Phil Howard2024-03-07
| | | | | | | | | | | | | | | | Prune trailing whitespace across the whole project (almost), done automatically with: grep -IUrl --color "[[:blank:]]$" --exclude-dir=.git --exclude=*.exp |\ xargs sed -i 's/[[:space:]]*$//' Exceptions: - Skip third-party code in lib/ and drivers/cc3100/ - Skip generated code in bluetooth_init_cc2564C_1.5.c - Preserve command output whitespace in docs, eg: docs/esp8266/tutorial/repl.rst Signed-off-by: Phil Howard <phil@gadgetoid.com>
* github/ISSUE_TEMPLATE: Convert issue templates to forms.Angus Gratton2024-02-24
| | | | | | | | | Allows giving more specific advice, provides more links to other places to ask questions, check details, etc. This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>
* github/workflows: Standardise formatting of ruff.yml.Angus Gratton2024-02-07
| | | | | | | | | | | | All the other workflow YAML files use vertical whitespace around top-level items. Also remove spurious comment, the features in the linked doc aren't actually used in this workflow (any more?). This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>
* github/workflows: Add comments where tool versions need to be in sync.Angus Gratton2024-02-07
| | | | | | This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>
* github/workflows: Move codespell to a GitHub workflow, version it.Angus Gratton2024-02-07
| | | | | | | | | | | | | Similar to ruff.yaml, it's simpler to run the codespell command directly from a workflow file. And developers can run codespell directly from the command line without the need for options, or just use pre-commit. This commit also applies a specific version to codespell, same as pre-commit (introduced in a166d805f43). This work was funded through GitHub Sponsors. Signed-off-by: Angus Gratton <angus@redyak.com.au>
* github/workflows: Initialise micropython-lib submodule for windows CI.Damien George2024-02-07
| | | | Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Bump setup-msbuild, setup-python, checkout versions.Damien George2024-02-07
| | | | Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Move Windows CI from AppVeyor to GitHub Actions.David Lechner2024-02-06
| | | | | | | | | | | | By moving to GitHub actions, all MicroPython CI builds are now on GitHub actions. This allows faster parallel builds and saves time by not building when no relevant files changed. This reveals a few failing tests, so those are temporarily disabled until they can be fixed. Signed-off-by: David Lechner <david@pybricks.com> Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Run mimxrt and rp2 CI with space in repository path.Damien George2024-01-24
| | | | | | To test building with make and cmake when there is a space in the path. Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Bump actions/cache from 3 to 4.dependabot[bot]2024-01-22
| | | | | | | | | | | | | | | | Bumps [actions/cache](https://github.com/actions/cache) from 3 to 4. - [Release notes](https://github.com/actions/cache/releases) - [Changelog](https://github.com/actions/cache/blob/main/RELEASES.md) - [Commits](https://github.com/actions/cache/compare/v3...v4) --- updated-dependencies: - dependency-name: actions/cache dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>
* github/workflows: Bump actions/upload-artifact from 3 to 4.dependabot[bot]2023-12-15
| | | | | | | | | | | | | | | | Bumps [actions/upload-artifact](https://github.com/actions/upload-artifact) from 3 to 4. - [Release notes](https://github.com/actions/upload-artifact/releases) - [Commits](https://github.com/actions/upload-artifact/compare/v3...v4) --- updated-dependencies: - dependency-name: actions/upload-artifact dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>
* github/workflows: Bump actions/setup-python from 4 to 5.dependabot[bot]2023-12-15
| | | | | | | | | | | | | | | | Bumps [actions/setup-python](https://github.com/actions/setup-python) from 4 to 5. - [Release notes](https://github.com/actions/setup-python/releases) - [Commits](https://github.com/actions/setup-python/compare/v4...v5) --- updated-dependencies: - dependency-name: actions/setup-python dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>
* github/workflows: Bump actions/github-script from 6 to 7.dependabot[bot]2023-12-15
| | | | | | | | | | | | | | | | Bumps [actions/github-script](https://github.com/actions/github-script) from 6 to 7. - [Release notes](https://github.com/actions/github-script/releases) - [Commits](https://github.com/actions/github-script/compare/v6...v7) --- updated-dependencies: - dependency-name: actions/github-script dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>
* tools/ci.sh: Build ESP32_GENERIC-SPIRAM as part of esp32 CI.Damien George2023-12-06
| | | | Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Enable ccache for esp32 build.Angus Gratton2023-12-06
| | | | | | | | | CCaches are scoped per-job. Uses https://github.com/hendrikmuhs/ccache-action to get desired behaviour (updating the cache on each run). Signed-off-by: Angus Gratton <angus@redyak.com.au>
* github/workflows: Enable build matrix for stm32 port.Angus Gratton2023-12-06
| | | | | | | This is for consistency with the previous commit that uses this approach for esp32. Signed-off-by: Angus Gratton <angus@redyak.com.au>
* github/workflows: Use build matrix for esp32 port.Angus Gratton2023-12-06
| | | | | | | | | | | | | | Allows splitting the esp32 job into multiple parts without too much boilerplate. The matrix is parameterised using the name of the function to call in tools/ci.sh, to minimise the dependency on GitHub Actions. This can get esp32 build times down around 3m if IDF is cached already. If the cache is cold, the cache preparation step on each job can double up against each other. However, restructuring the workflow to not do this seems either complex or requires copy-pasting the entire cache step. Signed-off-by: Angus Gratton <angus@redyak.com.au>
* github/workflows: Cache ESP-IDF checkout and installation.Angus Gratton2023-12-06
| | | | | | | | | | | | | | Cache is keyed on the ESP-IDF version used in CI, so there shouldn't be any cache invalidation issues when ESP-IDF version changes. Restoring from cache takes approx 15s, compared to 2-3m to perform these steps (ESP-IDF tools install, ESP-IDF clone, ESP-IDF submodule clone) the first time. Cache size is approx 1.6GB, the git clone is tweaked as much as possible to keep the size down. Signed-off-by: Angus Gratton <angus@redyak.com.au>
* all: Replace "black" with "ruff format".Jim Mussared2023-11-03
| | | | | | | | | | | | | - Add config for [tool.ruff.format] to pyproject.toml. - Update pre-commit to run both ruff and ruff-format (and only check C files when running codeformat.py) - Update CI. - Simplify codeformat.py to remove all the Python-specific logic (just run "ruff format" directly). This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
* teensy: Remove the teensy port.Jim Mussared2023-10-31
| | | | | | | | | | This port is largely unmaintained, has limited features (the only hardware support is for GPIO and timer, and no machine module), only supports a small number of Teensy boards, and can be confused with the mimxrt support for Teensy 4.x. Signed-off-by: Jim Mussared <jim.mussared@gmail.com> Signed-off-by: Damien George <damien@micropython.org>
* py/mkrules.mk: Add MICROPY_PREVIEW_VERSION_2.Jim Mussared2023-10-27
| | | | | | | | | | | | | | | | | | | | | | This provides a way to enable features and changes slated for MicroPython 2.x, by running `make MICROPY_PREVIEW_VERSION_2=1`. Also supported for the cmake ports (except Zephyr). This is an alternative to having a 2.x development branch (or equivalently, keeping a 1.x release branch). Any feature or change that needs to be "hidden" until 2.x can use this flag (either in the Makefile or the preprocessor). A good example is changing function arguments or other public API features, in particular to aid in improving consistency between ports. When `MICROPY_PREVIEW_VERSION_2` is enabled, the REPL banner is amended to say "MicroPython (with v2.0 preview) vX.Y.Z", and sys.implementation gets a new field `_v2` set to `True`. This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
* github/workflows: Pin ruff to 0.1.0 and change flags for new version.Jim Mussared2023-10-17
| | | | | | | | | | | The `--format` flag was changed to `--output-format` in the recent update. Pin to this version to prevent further updates from breaking (e.g. through new rules or other changes). This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
* README.md: Update CI badges.Jim Mussared2023-10-06
| | | | | | | | | | | - Fix URL for the unix badge. - Add stm32 CI badge. - Add docs CI badge (linking to the documentation) - Make docs CI run on push (so we get a badge generated). This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
* docs: Add requirements.txt file with dependencies for Sphinx.Jos Verlinde2023-10-02
| | | | Signed-off-by: Jos Verlinde <Jos.Verlinde@Microsoft.com>
* github/workflows: Bump actions/checkout from 3 to 4.dependabot[bot]2023-09-05
| | | | | | | | | | | | | | | | Bumps [actions/checkout](https://github.com/actions/checkout) from 3 to 4. - [Release notes](https://github.com/actions/checkout/releases) - [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md) - [Commits](https://github.com/actions/checkout/compare/v3...v4) --- updated-dependencies: - dependency-name: actions/checkout dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>
* github/workflows: Update esp32 CI to use IDF v5.0.Damien George2023-06-23
| | | | Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Force use of Ubuntu-20.04 for unix 32-bit builds.Damien George2023-05-18
| | | | | | To be able to install libffi-dev:i386. Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Add GitHub Action to lint Python code with ruff.Christian Clauss2023-05-02
| | | | Signed-off-by: Damien George <damien@micropython.org>
* all: Fix spelling mistakes based on codespell check.Damien George2023-04-27
| | | | Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Add spell check to code formatting workflow.Damien George2023-04-27
| | | | Signed-off-by: Damien George <damien@micropython.org>
* github/workflows: Fetch full history for mpremote workflow.Jim Mussared2023-04-27
| | | | | | | Instead of doing the shallow checkout followed by an unshallow-with-tags, just set fetch-depth=0 to get the full history to start with. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
* github/workflows: Bump actions/upload-artifact from 2 to 3.dependabot[bot]2023-02-27
| | | | | | | | | | | | | | | Bumps [actions/upload-artifact](https://github.com/actions/upload-artifact) from 2 to 3. - [Release notes](https://github.com/actions/upload-artifact/releases) - [Commits](https://github.com/actions/upload-artifact/compare/v2...v3) --- updated-dependencies: - dependency-name: actions/upload-artifact dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>
* github/workflows: Bump actions/checkout from 2 to 3.dependabot[bot]2023-02-27
| | | | | | | | | | | | | | | | Bumps [actions/checkout](https://github.com/actions/checkout) from 2 to 3. - [Release notes](https://github.com/actions/checkout/releases) - [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md) - [Commits](https://github.com/actions/checkout/compare/v2...v3) --- updated-dependencies: - dependency-name: actions/checkout dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>
* github/workflows: Bump actions/setup-python from 1 to 4.dependabot[bot]2023-02-27
| | | | | | | | | | | | | | | Bumps [actions/setup-python](https://github.com/actions/setup-python) from 1 to 4. - [Release notes](https://github.com/actions/setup-python/releases) - [Commits](https://github.com/actions/setup-python/compare/v1...v4) --- updated-dependencies: - dependency-name: actions/setup-python dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>
* github/workflows: Add workflow to build mpremote wheel.Jim Mussared2023-02-24
| | | | Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
* github/workflows: Add "shared/**" to list of paths that trigger CI.Damien George2023-02-17
| | | | | | All ports use code from shared/ so should rebuild when it changes. Signed-off-by: Damien George <damien@micropython.org>
* examples/embedding: Rework example to use ports/embed.Damien George2023-01-20
| | | | Signed-off-by: Damien George <damien@micropython.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-30 17:42:41 +0000