diff options
Diffstat (limited to 'stmhal/main.c')
| -rw-r--r-- | stmhal/main.c | 24 |
1 files changed, 19 insertions, 5 deletions
diff --git a/stmhal/main.c b/stmhal/main.c index 70cb793e37..2e072b998a 100644 --- a/stmhal/main.c +++ b/stmhal/main.c @@ -268,9 +268,20 @@ int main(void) { __GPIOC_CLK_ENABLE(); __GPIOD_CLK_ENABLE(); + #if defined(__HAL_RCC_DTCMRAMEN_CLK_ENABLE) + // The STM32F746 doesn't really have CCM memory, but it does have DTCM, + // which behaves more or less like normal SRAM. + __HAL_RCC_DTCMRAMEN_CLK_ENABLE(); + #else // enable the CCM RAM __CCMDATARAMEN_CLK_ENABLE(); + #endif + #if defined(MICROPY_BOARD_EARLY_INIT) + MICROPY_BOARD_EARLY_INIT(); + #endif + + //TODO - Move the following to a board_init.c file for the NETDUINO #if 0 #if defined(NETDUINO_PLUS_2) { @@ -388,13 +399,14 @@ soft_reset: timer_init0(); uart_init0(); - // Change #if 0 to #if 1 if you want REPL on UART_6 (or another uart) - // as well as on USB VCP -#if 0 + // Define MICROPY_HW_UART_REPL to be PYB_UART_6 and define + // MICROPY_HW_UART_REPL_BAUD in your mpconfigboard.h file if you want a + // REPL on a hardware UART as well as on USB VCP +#if defined(MICROPY_HW_UART_REPL) { mp_obj_t args[2] = { - MP_OBJ_NEW_SMALL_INT(PYB_UART_6), - MP_OBJ_NEW_SMALL_INT(115200), + MP_OBJ_NEW_SMALL_INT(MICROPY_HW_UART_REPL), + MP_OBJ_NEW_SMALL_INT(MICROPY_HW_UART_REPL_BAUD), }; MP_STATE_PORT(pyb_stdio_uart) = pyb_uart_type.make_new((mp_obj_t)&pyb_uart_type, MP_ARRAY_SIZE(args), 0, args); } @@ -410,8 +422,10 @@ soft_reset: rng_init0(); #endif +#if !defined(STM32F7) // Temp hack i2c_init0(); spi_init0(); +#endif pyb_usb_init0(); // Initialise the local flash filesystem. |