diff options
Diffstat (limited to 'stmhal/boards/ESPRUINO_PICO/mpconfigboard.h')
| -rw-r--r-- | stmhal/boards/ESPRUINO_PICO/mpconfigboard.h | 50 |
1 files changed, 50 insertions, 0 deletions
diff --git a/stmhal/boards/ESPRUINO_PICO/mpconfigboard.h b/stmhal/boards/ESPRUINO_PICO/mpconfigboard.h new file mode 100644 index 0000000000..7084d24189 --- /dev/null +++ b/stmhal/boards/ESPRUINO_PICO/mpconfigboard.h @@ -0,0 +1,50 @@ +#define MICROPY_HW_BOARD_NAME "Espruino Pico" +#define MICROPY_HW_MCU_NAME "STM32F401CD" +#define MICROPY_PY_SYS_PLATFORM "pyboard" + +#define MICROPY_HW_HAS_SWITCH (1) +#define MICROPY_HW_HAS_SDCARD (0) +#define MICROPY_HW_HAS_MMA7660 (0) +#define MICROPY_HW_HAS_LIS3DSH (0) +#define MICROPY_HW_HAS_LCD (0) +#define MICROPY_HW_ENABLE_RNG (0) +#define MICROPY_HW_ENABLE_RTC (1) +#define MICROPY_HW_ENABLE_TIMER (1) +#define MICROPY_HW_ENABLE_SERVO (1) +#define MICROPY_HW_ENABLE_DAC (0) +#define MICROPY_HW_ENABLE_SPI1 (1) +#define MICROPY_HW_ENABLE_SPI2 (1) +#define MICROPY_HW_ENABLE_SPI3 (0) +#define MICROPY_HW_ENABLE_CAN (0) + +// Pico has an 8 MHz HSE and the F401 does 84 MHz max +#define MICROPY_HW_CLK_PLLM (5) +#define MICROPY_HW_CLK_PLLN (210) +#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV4) +#define MICROPY_HW_CLK_PLLQ (7) + +// does not have a 32kHz crystal +#define MICROPY_HW_RTC_USE_LSE (0) + +// I2C busses +#define MICROPY_HW_I2C1_SCL (pin_B6) +#define MICROPY_HW_I2C1_SDA (pin_B7) +#define MICROPY_HW_I2C2_SCL (pin_B10) +#define MICROPY_HW_I2C2_SDA (pin_B3) +#define MICROPY_HW_I2C3_SCL (pin_A8) +#define MICROPY_HW_I2C3_SDA (pin_B4) + +// BTN1 has no pullup or pulldown; it is active high and broken out on a header +#define MICROPY_HW_USRSW_PIN (pin_C13) +#define MICROPY_HW_USRSW_PULL (GPIO_PULLDOWN) +#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_RISING) +#define MICROPY_HW_USRSW_PRESSED (1) + +// Pico has 2 LEDs +#define MICROPY_HW_LED1 (pin_B2) // red +#define MICROPY_HW_LED2 (pin_B12) // green +#define MICROPY_HW_LED3 (pin_B12) // green +#define MICROPY_HW_LED4 (pin_B12) // green +#define MICROPY_HW_LED_OTYPE (GPIO_MODE_OUTPUT_PP) +#define MICROPY_HW_LED_ON(pin) (pin->gpio->BSRRL = pin->pin_mask) +#define MICROPY_HW_LED_OFF(pin) (pin->gpio->BSRRH = pin->pin_mask) |