diff options
Diffstat (limited to 'stm/stmperiph/stm32f4xx_syscfg.c')
| -rw-r--r-- | stm/stmperiph/stm32f4xx_syscfg.c | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/stm/stmperiph/stm32f4xx_syscfg.c b/stm/stmperiph/stm32f4xx_syscfg.c new file mode 100644 index 0000000000..638f76115a --- /dev/null +++ b/stm/stmperiph/stm32f4xx_syscfg.c @@ -0,0 +1,240 @@ +/**
+ ******************************************************************************
+ * @file stm32f4xx_syscfg.c
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 08-November-2013
+ * @brief This file provides firmware functions to manage the SYSCFG peripheral.
+ *
+ @verbatim
+
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..] This driver provides functions for:
+
+ (#) Remapping the memory accessible in the code area using SYSCFG_MemoryRemapConfig()
+
+ (#) Swapping the internal flash Bank1 and Bank2 this features is only visible for
+ STM32F42xxx/43xxx devices Devices.
+
+ (#) Manage the EXTI lines connection to the GPIOs using SYSCFG_EXTILineConfig()
+
+ (#) Select the ETHERNET media interface (RMII/RII) using SYSCFG_ETH_MediaInterfaceConfig()
+
+ -@- SYSCFG APB clock must be enabled to get write access to SYSCFG registers,
+ using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_syscfg.h"
+#include "stm32f4xx_rcc.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup SYSCFG
+ * @brief SYSCFG driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* ------------ RCC registers bit address in the alias region ----------- */
+#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
+/* --- MEMRMP Register ---*/
+/* Alias word address of UFB_MODE bit */
+#define MEMRMP_OFFSET SYSCFG_OFFSET
+#define UFB_MODE_BitNumber ((uint8_t)0x8)
+#define UFB_MODE_BB (PERIPH_BB_BASE + (MEMRMP_OFFSET * 32) + (UFB_MODE_BitNumber * 4))
+
+
+/* --- PMC Register ---*/
+/* Alias word address of MII_RMII_SEL bit */
+#define PMC_OFFSET (SYSCFG_OFFSET + 0x04)
+#define MII_RMII_SEL_BitNumber ((uint8_t)0x17)
+#define PMC_MII_RMII_SEL_BB (PERIPH_BB_BASE + (PMC_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4))
+
+/* --- CMPCR Register ---*/
+/* Alias word address of CMP_PD bit */
+#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20)
+#define CMP_PD_BitNumber ((uint8_t)0x00)
+#define CMPCR_CMP_PD_BB (PERIPH_BB_BASE + (CMPCR_OFFSET * 32) + (CMP_PD_BitNumber * 4))
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SYSCFG_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the Alternate Functions (remap and EXTI configuration)
+ * registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void SYSCFG_DeInit(void)
+{
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, DISABLE);
+}
+
+/**
+ * @brief Changes the mapping of the specified pin.
+ * @param SYSCFG_Memory: selects the memory remapping.
+ * This parameter can be one of the following values:
+ * @arg SYSCFG_MemoryRemap_Flash: Main Flash memory mapped at 0x00000000
+ * @arg SYSCFG_MemoryRemap_SystemFlash: System Flash memory mapped at 0x00000000
+ * @arg SYSCFG_MemoryRemap_FSMC: FSMC (Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 for STM32F405xx/407xx and STM32F415xx/417xx devices.
+ * @arg SYSCFG_MemoryRemap_FMC: FMC (Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 for STM32F42xxx/43xxx devices.
+ * @arg SYSCFG_MemoryRemap_SRAM: Embedded SRAM (112kB) mapped at 0x00000000
+ * @arg SYSCFG_MemoryRemap_SDRAM: FMC (External SDRAM) mapped at 0x00000000 for STM32F42xxx/43xxx devices.
+ * @retval None
+ */
+void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSCFG_MEMORY_REMAP_CONFING(SYSCFG_MemoryRemap));
+
+ SYSCFG->MEMRMP = SYSCFG_MemoryRemap;
+}
+
+/**
+ * @brief Enables or disables the Interal FLASH Bank Swapping.
+ *
+ * @note This function can be used only for STM32F42xxx/43xxx devices.
+ *
+ * @param NewState: new state of Interal FLASH Bank swapping.
+ * This parameter can be one of the following values:
+ * @arg ENABLE: Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
+ * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000)
+ * @arg DISABLE:(the default state) Flash Bank1 mapped at 0x08000000 (and aliased @0x0000 0000)
+ and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000)
+ * @retval None
+ */
+void SYSCFG_MemorySwappingBank(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) UFB_MODE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Selects the GPIO pin used as EXTI Line.
+ * @param EXTI_PortSourceGPIOx : selects the GPIO port to be used as source for
+ * EXTI lines where x can be (A..K) for STM32F42xxx/43xxx devices, (A..I)
+ * for STM32F405xx/407xx and STM32F415xx/417xx devices or (A, B, C, D and H)
+ * for STM32401xx devices.
+ *
+ * @param EXTI_PinSourcex: specifies the EXTI line to be configured.
+ * This parameter can be EXTI_PinSourcex where x can be (0..15, except
+ * for EXTI_PortSourceGPIOI x can be (0..11) for STM32F405xx/407xx
+ * and STM32F405xx/407xx devices and for EXTI_PortSourceGPIOK x can
+ * be (0..7) for STM32F42xxx/43xxx devices.
+ *
+ * @retval None
+ */
+void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex)
+{
+ uint32_t tmp = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_EXTI_PORT_SOURCE(EXTI_PortSourceGPIOx));
+ assert_param(IS_EXTI_PIN_SOURCE(EXTI_PinSourcex));
+
+ tmp = ((uint32_t)0x0F) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03));
+ SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] &= ~tmp;
+ SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] |= (((uint32_t)EXTI_PortSourceGPIOx) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03)));
+}
+
+/**
+ * @brief Selects the ETHERNET media interface
+ * @param SYSCFG_ETH_MediaInterface: specifies the Media Interface mode.
+ * This parameter can be one of the following values:
+ * @arg SYSCFG_ETH_MediaInterface_MII: MII mode selected
+ * @arg SYSCFG_ETH_MediaInterface_RMII: RMII mode selected
+ * @retval None
+ */
+void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface)
+{
+ assert_param(IS_SYSCFG_ETH_MEDIA_INTERFACE(SYSCFG_ETH_MediaInterface));
+ /* Configure MII_RMII selection bit */
+ *(__IO uint32_t *) PMC_MII_RMII_SEL_BB = SYSCFG_ETH_MediaInterface;
+}
+
+/**
+ * @brief Enables or disables the I/O Compensation Cell.
+ * @note The I/O compensation cell can be used only when the device supply
+ * voltage ranges from 2.4 to 3.6 V.
+ * @param NewState: new state of the I/O Compensation Cell.
+ * This parameter can be one of the following values:
+ * @arg ENABLE: I/O compensation cell enabled
+ * @arg DISABLE: I/O compensation cell power-down mode
+ * @retval None
+ */
+void SYSCFG_CompensationCellCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMPCR_CMP_PD_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Checks whether the I/O Compensation Cell ready flag is set or not.
+ * @param None
+ * @retval The new state of the I/O Compensation Cell ready flag (SET or RESET)
+ */
+FlagStatus SYSCFG_GetCompensationCellStatus(void)
+{
+ FlagStatus bitstatus = RESET;
+
+ if ((SYSCFG->CMPCR & SYSCFG_CMPCR_READY ) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|