summaryrefslogtreecommitdiffstatshomepage
path: root/stm/lib/stm32f4xx_conf.h
diff options
context:
space:
mode:
Diffstat (limited to 'stm/lib/stm32f4xx_conf.h')
-rw-r--r--stm/lib/stm32f4xx_conf.h122
1 files changed, 0 insertions, 122 deletions
diff --git a/stm/lib/stm32f4xx_conf.h b/stm/lib/stm32f4xx_conf.h
deleted file mode 100644
index 515a93c6ef..0000000000
--- a/stm/lib/stm32f4xx_conf.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/**
- ******************************************************************************
- * @file Project/STM32F4xx_StdPeriph_Templates/stm32f4xx_conf.h
- * @author MCD Application Team
- * @version V1.3.0
- * @date 13-November-2013
- * @brief Library configuration file.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_CONF_H
-#define __STM32F4xx_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment the line below to enable peripheral header file inclusion */
-#include "stm32f4xx_adc.h"
-//#include "stm32f4xx_crc.h"
-//#include "stm32f4xx_dbgmcu.h"
-#include "stm32f4xx_dma.h"
-#include "stm32f4xx_exti.h"
-#include "stm32f4xx_flash.h"
-#include "stm32f4xx_gpio.h"
-#include "stm32f4xx_i2c.h"
-//#include "stm32f4xx_iwdg.h"
-#include "stm32f4xx_pwr.h"
-#include "stm32f4xx_rcc.h"
-#include "stm32f4xx_rtc.h"
-#include "stm32f4xx_sdio.h"
-#include "stm32f4xx_spi.h"
-#include "stm32f4xx_syscfg.h"
-#include "stm32f4xx_tim.h"
-#include "stm32f4xx_usart.h"
-//#include "stm32f4xx_wwdg.h"
-#include "stm_misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-#if defined (STM32F429_439xx)
-#include "stm32f4xx_cryp.h"
-#include "stm32f4xx_hash.h"
-#include "stm32f4xx_rng.h"
-#include "stm32f4xx_can.h"
-#include "stm32f4xx_dac.h"
-#include "stm32f4xx_dcmi.h"
-#include "stm32f4xx_dma2d.h"
-#include "stm32f4xx_fmc.h"
-#include "stm32f4xx_ltdc.h"
-#include "stm32f4xx_sai.h"
-#endif /* STM32F429_439xx */
-
-#if defined (STM32F427_437xx)
-#include "stm32f4xx_cryp.h"
-#include "stm32f4xx_hash.h"
-#include "stm32f4xx_rng.h"
-#include "stm32f4xx_can.h"
-#include "stm32f4xx_dac.h"
-#include "stm32f4xx_dcmi.h"
-#include "stm32f4xx_dma2d.h"
-#include "stm32f4xx_fmc.h"
-#include "stm32f4xx_sai.h"
-#endif /* STM32F427_437xx */
-
-#if defined (STM32F40_41xxx)
-//#include "stm32f4xx_cryp.h"
-//#include "stm32f4xx_hash.h"
-#include "stm32f4xx_rng.h"
-//#include "stm32f4xx_can.h"
-#include "stm32f4xx_dac.h"
-//#include "stm32f4xx_dcmi.h"
-//#include "stm32f4xx_fsmc.h"
-#endif /* STM32F40_41xxx */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* If an external clock source is used, then the value of the following define
- should be set to the value of the external clock source, else, if no external
- clock is used, keep this define commented */
-/*#define I2S_EXTERNAL_CLOCK_VAL 12288000 */ /* Value of the external clock in Hz */
-
-
-/* Uncomment the line below to expanse the "assert_param" macro in the
- Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT 1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef USE_FULL_ASSERT
-
-/**
- * @brief The assert_param macro is used for function's parameters check.
- * @param expr: If expr is false, it calls assert_failed function
- * which reports the name of the source file and the source
- * line number of the call that failed.
- * If expr is true, it returns no value.
- * @retval None
- */
- #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
- void assert_failed(uint8_t* file, uint32_t line);
-#else
- #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F4xx_CONF_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/