diff options
Diffstat (limited to 'drivers/cc3000/src/netapp.c')
| -rw-r--r-- | drivers/cc3000/src/netapp.c | 459 |
1 files changed, 0 insertions, 459 deletions
diff --git a/drivers/cc3000/src/netapp.c b/drivers/cc3000/src/netapp.c deleted file mode 100644 index a6f60feda0..0000000000 --- a/drivers/cc3000/src/netapp.c +++ /dev/null @@ -1,459 +0,0 @@ -/***************************************************************************** -* -* netapp.c - CC3000 Host Driver Implementation. -* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions -* are met: -* -* Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* -* Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the -* distribution. -* -* Neither the name of Texas Instruments Incorporated nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -*****************************************************************************/ - -#include <string.h> -#include "netapp.h" -#include "hci.h" -#include "socket.h" -#include "evnt_handler.h" -#include "nvmem.h" - -#define MIN_TIMER_VAL_SECONDS 10 -#define MIN_TIMER_SET(t) if ((0 != t) && (t < MIN_TIMER_VAL_SECONDS)) \ - { \ - t = MIN_TIMER_VAL_SECONDS; \ - } - - -#define NETAPP_DHCP_PARAMS_LEN (20) -#define NETAPP_SET_TIMER_PARAMS_LEN (20) -#define NETAPP_SET_DEBUG_LEVEL_PARAMS_LEN (4) -#define NETAPP_PING_SEND_PARAMS_LEN (16) - - -//***************************************************************************** -// -//! netapp_config_mac_adrress -//! -//! @param mac device mac address, 6 bytes. Saved: yes -//! -//! @return return on success 0, otherwise error. -//! -//! @brief Configure device MAC address and store it in NVMEM. -//! The value of the MAC address configured through the API will -//! be stored in CC3000 non volatile memory, thus preserved -//! over resets. -// -//***************************************************************************** -INT32 netapp_config_mac_adrress(UINT8 * mac) -{ - return nvmem_set_mac_address(mac); -} - -//***************************************************************************** -// -//! netapp_dhcp -//! -//! @param aucIP device mac address, 6 bytes. Saved: yes -//! @param aucSubnetMask device mac address, 6 bytes. Saved: yes -//! @param aucDefaultGateway device mac address, 6 bytes. Saved: yes -//! @param aucDNSServer device mac address, 6 bytes. Saved: yes -//! -//! @return return on success 0, otherwise error. -//! -//! @brief netapp_dhcp is used to configure the network interface, -//! static or dynamic (DHCP).\n In order to activate DHCP mode, -//! aucIP, aucSubnetMask, aucDefaultGateway must be 0. -//! The default mode of CC3000 is DHCP mode. -//! Note that the configuration is saved in non volatile memory -//! and thus preserved over resets. -//! -//! @note If the mode is altered a reset of CC3000 device is required -//! in order to apply changes.\nAlso note that asynchronous event -//! of DHCP_EVENT, which is generated when an IP address is -//! allocated either by the DHCP server or due to static -//! allocation is generated only upon a connection to the -//! AP was established. -//! -//***************************************************************************** -INT32 netapp_dhcp(UINT32 *aucIP, UINT32 *aucSubnetMask,UINT32 *aucDefaultGateway, UINT32 *aucDNSServer) -{ - INT8 scRet; - UINT8 *ptr; - UINT8 *args; - - scRet = EFAIL; - ptr = tSLInformation.pucTxCommandBuffer; - args = (ptr + HEADERS_SIZE_CMD); - - // Fill in temporary command buffer - ARRAY_TO_STREAM(args,aucIP,4); - ARRAY_TO_STREAM(args,aucSubnetMask,4); - ARRAY_TO_STREAM(args,aucDefaultGateway,4); - args = UINT32_TO_STREAM(args, 0); - ARRAY_TO_STREAM(args,aucDNSServer,4); - - // Initiate a HCI command - hci_command_send(HCI_NETAPP_DHCP, ptr, NETAPP_DHCP_PARAMS_LEN); - - // Wait for command complete event - SimpleLinkWaitEvent(HCI_NETAPP_DHCP, &scRet); - - return(scRet); -} - - -//***************************************************************************** -// -//! netapp_timeout_values -//! -//! @param aucDHCP DHCP lease time request, also impact -//! the DHCP renew timeout. Range: [0-0xffffffff] seconds, -//! 0 or 0xffffffff == infinity lease timeout. -//! Resolution:10 seconds. Influence: only after -//! reconnecting to the AP. -//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 seconds. -//! The parameter is saved into the CC3000 NVMEM. -//! The default value on CC3000 is 14400 seconds. -//! -//! @param aucARP ARP refresh timeout, if ARP entry is not updated by -//! incoming packet, the ARP entry will be deleted by -//! the end of the timeout. -//! Range: [0-0xffffffff] seconds, 0 == infinity ARP timeout -//! Resolution: 10 seconds. Influence: on runtime. -//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 seconds -//! The parameter is saved into the CC3000 NVMEM. -//! The default value on CC3000 is 3600 seconds. -//! -//! @param aucKeepalive Keepalive event sent by the end of keepalive timeout -//! Range: [0-0xffffffff] seconds, 0 == infinity timeout -//! Resolution: 10 seconds. -//! Influence: on runtime. -//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 sec -//! The parameter is saved into the CC3000 NVMEM. -//! The default value on CC3000 is 10 seconds. -//! -//! @param aucInactivity Socket inactivity timeout, socket timeout is -//! refreshed by incoming or outgoing packet, by the -//! end of the socket timeout the socket will be closed -//! Range: [0-0xffffffff] sec, 0 == infinity timeout. -//! Resolution: 10 seconds. Influence: on runtime. -//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 sec -//! The parameter is saved into the CC3000 NVMEM. -//! The default value on CC3000 is 60 seconds. -//! -//! @return return on success 0, otherwise error. -//! -//! @brief Set new timeout values. Function set new timeout values for: -//! DHCP lease timeout, ARP refresh timeout, keepalive event -//! timeout and socket inactivity timeout -//! -//! @note If a parameter set to non zero value which is less than 10s, -//! it will be set automatically to 10s. -//! -//***************************************************************************** - -#ifndef CC3000_TINY_DRIVER -INT32 netapp_timeout_values(UINT32 *aucDHCP, UINT32 *aucARP,UINT32 *aucKeepalive, UINT32 *aucInactivity) -{ - INT8 scRet; - UINT8 *ptr; - UINT8 *args; - - scRet = EFAIL; - ptr = tSLInformation.pucTxCommandBuffer; - args = (ptr + HEADERS_SIZE_CMD); - - // Set minimal values of timers - MIN_TIMER_SET(*aucDHCP) - MIN_TIMER_SET(*aucARP) - MIN_TIMER_SET(*aucKeepalive) - MIN_TIMER_SET(*aucInactivity) - - // Fill in temporary command buffer - args = UINT32_TO_STREAM(args, *aucDHCP); - args = UINT32_TO_STREAM(args, *aucARP); - args = UINT32_TO_STREAM(args, *aucKeepalive); - args = UINT32_TO_STREAM(args, *aucInactivity); - - // Initiate a HCI command - hci_command_send(HCI_NETAPP_SET_TIMERS, ptr, NETAPP_SET_TIMER_PARAMS_LEN); - - // Wait for command complete event - SimpleLinkWaitEvent(HCI_NETAPP_SET_TIMERS, &scRet); - - return(scRet); -} -#endif - - -//***************************************************************************** -// -//! netapp_ping_send -//! -//! @param ip destination IP address -//! @param pingAttempts number of echo requests to send -//! @param pingSize send buffer size which may be up to 1400 bytes -//! @param pingTimeout Time to wait for a response,in milliseconds. -//! -//! @return return on success 0, otherwise error. -//! -//! @brief send ICMP ECHO_REQUEST to network hosts -//! -//! @note If an operation finished successfully asynchronous ping report -//! event will be generated. The report structure is as defined -//! by structure netapp_pingreport_args_t. -//! -//! @warning Calling this function while a previous Ping Requests are in -//! progress will stop the previous ping request. -//***************************************************************************** - -#ifndef CC3000_TINY_DRIVER -INT32 - netapp_ping_send(UINT32 *ip, UINT32 ulPingAttempts, UINT32 ulPingSize, UINT32 ulPingTimeout) -{ - INT8 scRet; - UINT8 *ptr, *args; - - scRet = EFAIL; - ptr = tSLInformation.pucTxCommandBuffer; - args = (ptr + HEADERS_SIZE_CMD); - - // Fill in temporary command buffer - args = UINT32_TO_STREAM(args, *ip); - args = UINT32_TO_STREAM(args, ulPingAttempts); - args = UINT32_TO_STREAM(args, ulPingSize); - args = UINT32_TO_STREAM(args, ulPingTimeout); - - // Initiate a HCI command - hci_command_send(HCI_NETAPP_PING_SEND, ptr, NETAPP_PING_SEND_PARAMS_LEN); - - // Wait for command complete event - SimpleLinkWaitEvent(HCI_NETAPP_PING_SEND, &scRet); - - return(scRet); -} -#endif - -//***************************************************************************** -// -//! netapp_ping_report -//! -//! @param none -//! -//! @return none -//! -//! @brief Request for ping status. This API triggers the CC3000 to send -//! asynchronous events: HCI_EVNT_WLAN_ASYNC_PING_REPORT. -//! This event will carry the report structure: -//! netapp_pingreport_args_t. This structure is filled in with ping -//! results up till point of triggering API. -//! netapp_pingreport_args_t:\n packets_sent - echo sent, -//! packets_received - echo reply, min_round_time - minimum -//! round time, max_round_time - max round time, -//! avg_round_time - average round time -//! -//! @note When a ping operation is not active, the returned structure -//! fields are 0. -//! -//***************************************************************************** - - -#ifndef CC3000_TINY_DRIVER -void netapp_ping_report() -{ - UINT8 *ptr; - ptr = tSLInformation.pucTxCommandBuffer; - INT8 scRet; - - scRet = EFAIL; - - // Initiate a HCI command - hci_command_send(HCI_NETAPP_PING_REPORT, ptr, 0); - - // Wait for command complete event - SimpleLinkWaitEvent(HCI_NETAPP_PING_REPORT, &scRet); -} -#endif - -//***************************************************************************** -// -//! netapp_ping_stop -//! -//! @param none -//! -//! @return On success, zero is returned. On error, -1 is returned. -//! -//! @brief Stop any ping request. -//! -//! -//***************************************************************************** - -#ifndef CC3000_TINY_DRIVER -INT32 netapp_ping_stop() -{ - INT8 scRet; - UINT8 *ptr; - - scRet = EFAIL; - ptr = tSLInformation.pucTxCommandBuffer; - - // Initiate a HCI command - hci_command_send(HCI_NETAPP_PING_STOP, ptr, 0); - - // Wait for command complete event - SimpleLinkWaitEvent(HCI_NETAPP_PING_STOP, &scRet); - - return(scRet); -} -#endif - -//***************************************************************************** -// -//! netapp_ipconfig -//! -//! @param[out] ipconfig This argument is a pointer to a -//! tNetappIpconfigRetArgs structure. This structure is -//! filled in with the network interface configuration. -//! tNetappIpconfigRetArgs:\n aucIP - ip address, -//! aucSubnetMask - mask, aucDefaultGateway - default -//! gateway address, aucDHCPServer - dhcp server address -//! aucDNSServer - dns server address, uaMacAddr - mac -//! address, uaSSID - connected AP ssid -//! -//! @return none -//! -//! @brief Obtain the CC3000 Network interface information. -//! Note that the information is available only after the WLAN -//! connection was established. Calling this function before -//! associated, will cause non-defined values to be returned. -//! -//! @note The function is useful for figuring out the IP Configuration of -//! the device when DHCP is used and for figuring out the SSID of -//! the Wireless network the device is associated with. -//! -//***************************************************************************** - -#ifndef CC3000_TINY_DRIVER -void netapp_ipconfig( tNetappIpconfigRetArgs * ipconfig ) -{ - UINT8 *ptr; - - ptr = tSLInformation.pucTxCommandBuffer; - - // Initiate a HCI command - hci_command_send(HCI_NETAPP_IPCONFIG, ptr, 0); - - // Wait for command complete event - SimpleLinkWaitEvent(HCI_NETAPP_IPCONFIG, ipconfig ); - -} -#else -void netapp_ipconfig( tNetappIpconfigRetArgs * ipconfig ) -{ - -} -#endif - -//***************************************************************************** -// -//! netapp_arp_flush -//! -//! @param none -//! -//! @return none -//! -//! @brief Flushes ARP table -//! -//***************************************************************************** - -#ifndef CC3000_TINY_DRIVER -INT32 netapp_arp_flush(void) -{ - INT8 scRet; - UINT8 *ptr; - - scRet = EFAIL; - ptr = tSLInformation.pucTxCommandBuffer; - - // Initiate a HCI command - hci_command_send(HCI_NETAPP_ARP_FLUSH, ptr, 0); - - // Wait for command complete event - SimpleLinkWaitEvent(HCI_NETAPP_ARP_FLUSH, &scRet); - - return(scRet); -} -#endif - -//***************************************************************************** -// -//! netapp_set_debug_level -//! -//! @param[in] level debug level. Bitwise [0-8], -//! 0(disable)or 1(enable).\n Bitwise map: 0 - Critical -//! message, 1 information message, 2 - core messages, 3 - -//! HCI messages, 4 - Network stack messages, 5 - wlan -//! messages, 6 - wlan driver messages, 7 - epprom messages, -//! 8 - general messages. Default: 0x13f. Saved: no -//! -//! @return On success, zero is returned. On error, -1 is returned -//! -//! @brief Debug messages sent via the UART debug channel, this function -//! enable/disable the debug level -//! -//***************************************************************************** - - -#ifndef CC3000_TINY_DRIVER -INT32 netapp_set_debug_level(UINT32 ulLevel) -{ - INT8 scRet; - UINT8 *ptr, *args; - - scRet = EFAIL; - ptr = tSLInformation.pucTxCommandBuffer; - args = (ptr + HEADERS_SIZE_CMD); - - // - // Fill in temporary command buffer - // - args = UINT32_TO_STREAM(args, ulLevel); - - - // - // Initiate a HCI command - // - hci_command_send(HCI_NETAPP_SET_DEBUG_LEVEL, ptr, NETAPP_SET_DEBUG_LEVEL_PARAMS_LEN); - - // - // Wait for command complete event - // - SimpleLinkWaitEvent(HCI_NETAPP_SET_DEBUG_LEVEL, &scRet); - - return(scRet); - -} -#endif |