1 files changed, 0 insertions, 110 deletions
diff --git a/docs/tutorial/repl.rst b/docs/tutorial/repl.rst
deleted file mode 100644
index 303f035f8d..0000000000
--- a/docs/tutorial/repl.rst
+++ /dev/null
@@ -1,110 +0,0 @@
-Getting a Micro Python REPL prompt
-==================================
-
-REPL stands for Read Evaluate Print Loop, and is the name given to the
-interactive Micro Python prompt that you can access on the pyboard.  Using
-the REPL is by far the easiest way to test out your code and run commands.
-You can use the REPL in addition to writing scripts in ``main.py``.
-
-To use the REPL, you must connect to the serial USB device on the pyboard.
-How you do this depends on your operating system.
-
-Windows
--------
-
-You need to install the pyboard driver to use the serial USB device.
-The driver is on the pyboard's USB flash drive, and is called ``pybcdc.inf``.
-
-To install this driver you need to go to Device Manager
-for your computer, find the pyboard in the list of devices (it should have
-a warning sign next to it because it's not working yet), right click on
-the pyboard device, select Properties, then Install Driver.  You need to
-then select the option to find the driver manually (don't use Windows auto update),
-navigate to the pyboard's USB drive, and select that.  It should then install.
-After installing, go back to the Device Manager to find the installed pyboard,
-and see which COM port it is (eg COM4).
-More comprehensive instructions can be found in the
-`Guide for pyboard on Windows (PDF) <http://micropython.org/resources/Micro-Python-Windows-setup.pdf>`_.
-Please consult this guide if you are having problems installing the driver.
-
-You now need to run your terminal program.  You can use HyperTerminal if you
-have it installed, or download the free program PuTTY:
-`putty.exe <http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html>`_.
-Using your serial program you must connect to the COM port that you found in the
-previous step.  With PuTTY, click on "Session" in the left-hand panel, then click
-the "Serial" radio button on the right, then enter you COM port (eg COM4) in the
-"Serial Line" box.  Finally, click the "Open" button.
-
-Mac OS X
---------
-
-Open a terminal and run::
-
-    screen /dev/tty.usbmodem*
-    
-When you are finished and want to exit screen, type CTRL-A CTRL-\\.
-
-Linux
------
-
-Open a terminal and run::
-
-    screen /dev/ttyACM0
-    
-You can also try ``picocom`` or ``minicom`` instead of screen.  You may have to
-use ``/dev/ttyACM1`` or a higher number for ``ttyACM``.  And, you may need to give
-yourself the correct permissions to access this devices (eg group ``uucp`` or ``dialout``,
-or use sudo).
-
-Using the REPL prompt
----------------------
-
-Now let's try running some Micro Python code directly on the pyboard.
-
-With your serial program open (PuTTY, screen, picocom, etc) you may see a blank
-screen with a flashing cursor.  Press Enter and you should be presented with a
-Micro Python prompt, i.e. ``>>>``.  Let's make sure it is working with the obligatory test::
-
-    >>> print("hello pyboard!")
-    hello pyboard!
-
-In the above, you should not type in the ``>>>`` characters.  They are there to
-indicate that you should type the text after it at the prompt.  In the end, once
-you have entered the text ``print("hello pyboard!")`` and pressed Enter, the output
-on your screen should look like it does above.
-
-If you already know some python you can now try some basic commands here. 
-
-If any of this is not working you can try either a hard reset or a soft reset;
-see below.
-
-Go ahead and try typing in some other commands.  For example::
-
-    >>> pyb.LED(1).on()
-    >>> pyb.LED(2).on()
-    >>> 1 + 2
-    3
-    >>> 1 / 2
-    0.5
-    >>> 20 * 'py'
-    'pypypypypypypypypypypypypypypypypypypypy'
-
-Resetting the board
--------------------
-
-If something goes wrong, you can reset the board in two ways. The first is to press CTRL-D
-at the Micro Python prompt, which performs a soft reset.  You will see a message something like ::
-
-    >>> 
-    PYB: sync filesystems
-    PYB: soft reboot
-    Micro Python v1.0 on 2014-05-03; PYBv1.0 with STM32F405RG
-    Type "help()" for more information.
-    >>>
-
-If that isn't working you can perform a hard reset (turn-it-off-and-on-again) by pressing the RST
-switch (the small black button closest to the micro-USB socket on the board). This will end your
-session, disconnecting whatever program (PuTTY, screen, etc) that you used to connect to the pyboard.
-
-If you are going to do a hard-reset, it's recommended to first close your serial program and eject/unmount
-the pyboard drive.