1 files changed, 0 insertions, 86 deletions
diff --git a/docs/tutorial/lcd_skin.rst b/docs/tutorial/lcd_skin.rst
deleted file mode 100644
index 8ee31d9603..0000000000
--- a/docs/tutorial/lcd_skin.rst
+++ /dev/null
@@ -1,86 +0,0 @@
-The LCD and touch-sensor skin
-=============================
-
-Soldering and using the LCD and touch-sensor skin.
-
-.. image:: img/skin_lcd_1.jpg
-    :alt: pyboard with LCD skin
-    :width: 250px
-
-.. image:: img/skin_lcd_2.jpg
-    :alt: pyboard with LCD skin
-    :width: 250px
-
-The following video shows how to solder the headers onto the LCD skin.
-At the end of the video, it shows you how to correctly connect the LCD skin to the pyboard.
-
-.. raw:: html
-
-    <iframe style="margin-left:3em;" width="560" height="315" src="http://www.youtube.com/embed/PowCzdLYbFM?rel=0" frameborder="0" allowfullscreen></iframe>
-
-For circuit schematics and datasheets for the components on the skin see :ref:`hardware_index`.
-
-Using the LCD
--------------
-
-To get started using the LCD, try the following at the Micro Python prompt.
-Make sure the LCD skin is attached to the pyboard as pictured at the top of this page. ::
-
-    >>> import pyb
-    >>> lcd = pyb.LCD('X')
-    >>> lcd.light(True)
-    >>> lcd.write('Hello uPy!\n')
-
-You can make a simple animation using the code::
-
-    import pyb
-    lcd = pyb.LCD('X')
-    lcd.light(True)
-    for x in range(-80, 128):
-        lcd.fill(0)
-        lcd.text('Hello uPy!', x, 10, 1)
-        lcd.show()
-        pyb.delay(25)
-
-Using the touch sensor
-----------------------
-
-To read the touch-sensor data you need to use the I2C bus.  The
-MPR121 capacitive touch sensor has address 90.
-
-To get started, try::
-
-    >>> import pyb
-    >>> i2c = pyb.I2C(1, pyb.I2C.MASTER)
-    >>> i2c.mem_write(4, 90, 0x5e)
-    >>> touch = i2c.mem_read(1, 90, 0)[0]
-
-The first line above makes an I2C object, and the second line
-enables the 4 touch sensors.  The third line reads the touch
-status and the ``touch`` variable holds the state of the 4 touch
-buttons (A, B, X, Y).
-
-There is a simple driver `here <http://micropython.org/resources/examples/mpr121.py>`_
-which allows you to set the threshold and debounce parameters, and
-easily read the touch status and electrode voltage levels.  Copy
-this script to your pyboard (either flash or SD card, in the top
-directory or ``lib/`` directory) and then try::
-
-    >>> import pyb
-    >>> import mpr121
-    >>> m = mpr121.MPR121(pyb.I2C(1, pyb.I2C.MASTER))
-    >>> for i in range(100):
-    ...   print(m.touch_status())
-    ...   pyb.delay(100)
-    ...
-
-This will continuously print out the touch status of all electrodes.
-Try touching each one in turn.
-
-Note that if you put the LCD skin in the Y-position, then you need to
-initialise the I2C bus using::
-
-    >>> m = mpr121.MPR121(pyb.I2C(2, pyb.I2C.MASTER))
-
-There is also a demo which uses the LCD and the touch sensors together,
-and can be found `here <http://micropython.org/resources/examples/lcddemo.py>`_.