diff options
Diffstat (limited to 'docs/library')
| -rw-r--r-- | docs/library/network.CC3K.rst | 2 | ||||
| -rw-r--r-- | docs/library/network.WIZNET5K.rst | 2 | ||||
| -rw-r--r-- | docs/library/pyb.CAN.rst | 2 | ||||
| -rw-r--r-- | docs/library/pyb.I2C.rst | 2 | ||||
| -rw-r--r-- | docs/library/pyb.SPI.rst | 2 | ||||
| -rw-r--r-- | docs/library/pyb.UART.rst | 2 | ||||
| -rw-r--r-- | docs/library/pyb.rst | 2 |
7 files changed, 7 insertions, 7 deletions
diff --git a/docs/library/network.CC3K.rst b/docs/library/network.CC3K.rst index 18210e2d26..41d3fb437e 100644 --- a/docs/library/network.CC3K.rst +++ b/docs/library/network.CC3K.rst @@ -25,7 +25,7 @@ For this example to work the CC3000 module must have the following connections: - VBEN connected to Y4 - IRQ connected to Y3 -It is possible to use other SPI busses and other pins for CS, VBEN and IRQ. +It is possible to use other SPI buses and other pins for CS, VBEN and IRQ. Constructors ------------ diff --git a/docs/library/network.WIZNET5K.rst b/docs/library/network.WIZNET5K.rst index e21e3a4978..9e2c40f7f3 100644 --- a/docs/library/network.WIZNET5K.rst +++ b/docs/library/network.WIZNET5K.rst @@ -26,7 +26,7 @@ For this example to work the WIZnet5x00 module must have the following connectio - nSS connected to X5 - nRESET connected to X4 -It is possible to use other SPI busses and other pins for nSS and nRESET. +It is possible to use other SPI buses and other pins for nSS and nRESET. Constructors ------------ diff --git a/docs/library/pyb.CAN.rst b/docs/library/pyb.CAN.rst index 649bcda108..bcaeeba9df 100644 --- a/docs/library/pyb.CAN.rst +++ b/docs/library/pyb.CAN.rst @@ -30,7 +30,7 @@ Constructors the bus, if any). If extra arguments are given, the bus is initialised. See :meth:`CAN.init` for parameters of initialisation. - The physical pins of the CAN busses are: + The physical pins of the CAN buses are: - ``CAN(1)`` is on ``YA``: ``(RX, TX) = (Y3, Y4) = (PB8, PB9)`` - ``CAN(2)`` is on ``YB``: ``(RX, TX) = (Y5, Y6) = (PB12, PB13)`` diff --git a/docs/library/pyb.I2C.rst b/docs/library/pyb.I2C.rst index 641dcb8815..56b036e074 100644 --- a/docs/library/pyb.I2C.rst +++ b/docs/library/pyb.I2C.rst @@ -64,7 +64,7 @@ Constructors the bus, if any). If extra arguments are given, the bus is initialised. See ``init`` for parameters of initialisation. - The physical pins of the I2C busses on Pyboards V1.0 and V1.1 are: + The physical pins of the I2C buses on Pyboards V1.0 and V1.1 are: - ``I2C(1)`` is on the X position: ``(SCL, SDA) = (X9, X10) = (PB6, PB7)`` - ``I2C(2)`` is on the Y position: ``(SCL, SDA) = (Y9, Y10) = (PB10, PB11)`` diff --git a/docs/library/pyb.SPI.rst b/docs/library/pyb.SPI.rst index 24e2ec5a73..c76b16789a 100644 --- a/docs/library/pyb.SPI.rst +++ b/docs/library/pyb.SPI.rst @@ -36,7 +36,7 @@ Constructors the bus, if any). If extra arguments are given, the bus is initialised. See ``init`` for parameters of initialisation. - The physical pins of the SPI busses are: + The physical pins of the SPI buses are: - ``SPI(1)`` is on the X position: ``(NSS, SCK, MISO, MOSI) = (X5, X6, X7, X8) = (PA4, PA5, PA6, PA7)`` - ``SPI(2)`` is on the Y position: ``(NSS, SCK, MISO, MOSI) = (Y5, Y6, Y7, Y8) = (PB12, PB13, PB14, PB15)`` diff --git a/docs/library/pyb.UART.rst b/docs/library/pyb.UART.rst index a1d6e59002..e1735403c4 100644 --- a/docs/library/pyb.UART.rst +++ b/docs/library/pyb.UART.rst @@ -57,7 +57,7 @@ Constructors the bus, if any). If extra arguments are given, the bus is initialised. See ``init`` for parameters of initialisation. - The physical pins of the UART busses on Pyboard are: + The physical pins of the UART buses on Pyboard are: - ``UART(4)`` is on ``XA``: ``(TX, RX) = (X1, X2) = (PA0, PA1)`` - ``UART(1)`` is on ``XB``: ``(TX, RX) = (X9, X10) = (PB6, PB7)`` diff --git a/docs/library/pyb.rst b/docs/library/pyb.rst index addcd20a91..321be3c52f 100644 --- a/docs/library/pyb.rst +++ b/docs/library/pyb.rst @@ -126,7 +126,7 @@ Power related functions - pclk2: frequency of the APB2 bus If given any arguments then the function sets the frequency of the CPU, - and the busses if additional arguments are given. Frequencies are given in + and the buses if additional arguments are given. Frequencies are given in Hz. Eg freq(120000000) sets sysclk (the CPU frequency) to 120MHz. Note that not all values are supported and the largest supported frequency not greater than the given value will be selected. |