diff options
Diffstat (limited to 'docs/library/machine.UART.rst')
| -rw-r--r-- | docs/library/machine.UART.rst | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/docs/library/machine.UART.rst b/docs/library/machine.UART.rst index 81e75e1ea3..594a11dce9 100644 --- a/docs/library/machine.UART.rst +++ b/docs/library/machine.UART.rst @@ -70,7 +70,7 @@ Methods .. only:: port_wipy - .. method:: uart.init(baudrate=9600, bits=8, parity=None, stop=1, \*, pins=(TX, RX, RTS, CTS)) + .. method:: UART.init(baudrate=9600, bits=8, parity=None, stop=1, \*, pins=(TX, RX, RTS, CTS)) Initialise the UART bus with the given parameters: @@ -86,28 +86,28 @@ Methods .. only:: not port_esp8266 - .. method:: uart.deinit() + .. method:: UART.deinit() Turn off the UART bus. - .. method:: uart.any() + .. method:: UART.any() Return the number of characters available for reading. -.. method:: uart.read([nbytes]) +.. method:: UART.read([nbytes]) Read characters. If ``nbytes`` is specified then read at most that many bytes. Return value: a bytes object containing the bytes read in. Returns ``None`` on timeout. -.. method:: uart.readall() +.. method:: UART.readall() Read as much data as possible. Return value: a bytes object or ``None`` on timeout. -.. method:: uart.readinto(buf[, nbytes]) +.. method:: UART.readinto(buf[, nbytes]) Read bytes into the ``buf``. If ``nbytes`` is specified then read at most that many bytes. Otherwise, read at most ``len(buf)`` bytes. @@ -115,13 +115,13 @@ Methods Return value: number of bytes read and stored into ``buf`` or ``None`` on timeout. -.. method:: uart.readline() +.. method:: UART.readline() Read a line, ending in a newline character. Return value: the line read or ``None`` on timeout. -.. method:: uart.write(buf) +.. method:: UART.write(buf) Write the buffer of bytes to the bus. @@ -129,7 +129,7 @@ Methods .. only:: not port_esp8266 - .. method:: uart.sendbreak() + .. method:: UART.sendbreak() Send a break condition on the bus. This drives the bus low for a duration of 13 bits. @@ -137,7 +137,7 @@ Methods .. only:: port_wipy - .. method:: uart.irq(trigger, priority=1, handler=None, wake=machine.IDLE) + .. method:: UART.irq(trigger, priority=1, handler=None, wake=machine.IDLE) Create a callback to be triggered when data is received on the UART. |