diff options
Diffstat (limited to 'cc3200/hal/inc/hw_uart.h')
| -rw-r--r-- | cc3200/hal/inc/hw_uart.h | 417 |
1 files changed, 417 insertions, 0 deletions
diff --git a/cc3200/hal/inc/hw_uart.h b/cc3200/hal/inc/hw_uart.h new file mode 100644 index 0000000000..ae50ac381f --- /dev/null +++ b/cc3200/hal/inc/hw_uart.h @@ -0,0 +1,417 @@ +//***************************************************************************** +// +// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ +// +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +//***************************************************************************** + +#ifndef __HW_UART_H__ +#define __HW_UART_H__ + +//***************************************************************************** +// +// The following are defines for the UART register offsets. +// +//***************************************************************************** +#define UART_O_DR 0x00000000 +#define UART_O_RSR 0x00000004 +#define UART_O_ECR 0x00000004 +#define UART_O_FR 0x00000018 +#define UART_O_ILPR 0x00000020 +#define UART_O_IBRD 0x00000024 +#define UART_O_FBRD 0x00000028 +#define UART_O_LCRH 0x0000002C +#define UART_O_CTL 0x00000030 +#define UART_O_IFLS 0x00000034 +#define UART_O_IM 0x00000038 +#define UART_O_RIS 0x0000003C +#define UART_O_MIS 0x00000040 +#define UART_O_ICR 0x00000044 +#define UART_O_DMACTL 0x00000048 +#define UART_O_LCTL 0x00000090 +#define UART_O_LSS 0x00000094 +#define UART_O_LTIM 0x00000098 +#define UART_O_9BITADDR 0x000000A4 +#define UART_O_9BITAMASK 0x000000A8 +#define UART_O_PP 0x00000FC0 +#define UART_O_CC 0x00000FC8 + + + +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_DR register. +// +//****************************************************************************** +#define UART_DR_OE 0x00000800 // UART Overrun Error +#define UART_DR_BE 0x00000400 // UART Break Error +#define UART_DR_PE 0x00000200 // UART Parity Error +#define UART_DR_FE 0x00000100 // UART Framing Error +#define UART_DR_DATA_M 0x000000FF // Data Transmitted or Received +#define UART_DR_DATA_S 0 +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_RSR register. +// +//****************************************************************************** +#define UART_RSR_OE 0x00000008 // UART Overrun Error +#define UART_RSR_BE 0x00000004 // UART Break Error +#define UART_RSR_PE 0x00000002 // UART Parity Error +#define UART_RSR_FE 0x00000001 // UART Framing Error +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ECR register. +// +//****************************************************************************** +#define UART_ECR_DATA_M 0x000000FF // Error Clear +#define UART_ECR_DATA_S 0 +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_FR register. +// +//****************************************************************************** +#define UART_FR_RI 0x00000100 // Ring Indicator +#define UART_FR_TXFE 0x00000080 // UART Transmit FIFO Empty +#define UART_FR_RXFF 0x00000040 // UART Receive FIFO Full +#define UART_FR_TXFF 0x00000020 // UART Transmit FIFO Full +#define UART_FR_RXFE 0x00000010 // UART Receive FIFO Empty +#define UART_FR_BUSY 0x00000008 // UART Busy +#define UART_FR_DCD 0x00000004 // Data Carrier Detect +#define UART_FR_DSR 0x00000002 // Data Set Ready +#define UART_FR_CTS 0x00000001 // Clear To Send +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ILPR register. +// +//****************************************************************************** +#define UART_ILPR_ILPDVSR_M 0x000000FF // IrDA Low-Power Divisor +#define UART_ILPR_ILPDVSR_S 0 +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IBRD register. +// +//****************************************************************************** +#define UART_IBRD_DIVINT_M 0x0000FFFF // Integer Baud-Rate Divisor +#define UART_IBRD_DIVINT_S 0 +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_FBRD register. +// +//****************************************************************************** +#define UART_FBRD_DIVFRAC_M 0x0000003F // Fractional Baud-Rate Divisor +#define UART_FBRD_DIVFRAC_S 0 +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_LCRH register. +// +//****************************************************************************** +#define UART_LCRH_SPS 0x00000080 // UART Stick Parity Select +#define UART_LCRH_WLEN_M 0x00000060 // UART Word Length 0x00000000 : + // UART_LCRH_WLEN_5 : 5 bits + // (default) 0x00000020 : + // UART_LCRH_WLEN_6 : 6 bits + // 0x00000040 : UART_LCRH_WLEN_7 : 7 + // bits 0x00000060 : + // UART_LCRH_WLEN_8 : 8 bits +#define UART_LCRH_WLEN_S 5 +#define UART_LCRH_FEN 0x00000010 // UART Enable FIFOs +#define UART_LCRH_STP2 0x00000008 // UART Two Stop Bits Select +#define UART_LCRH_EPS 0x00000004 // UART Even Parity Select +#define UART_LCRH_PEN 0x00000002 // UART Parity Enable +#define UART_LCRH_BRK 0x00000001 // UART Send Break +#define UART_LCRH_WLEN_M 0x00000060 // UART Word Length +#define UART_LCRH_WLEN_5 0x00000000 // 5 bits (default) +#define UART_LCRH_WLEN_6 0x00000020 // 6 bits +#define UART_LCRH_WLEN_7 0x00000040 // 7 bits +#define UART_LCRH_WLEN_8 0x00000060 // 8 bits +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_CTL register. +// +//****************************************************************************** +#define UART_CTL_CTSEN 0x00008000 // Enable Clear To Send +#define UART_CTL_RTSEN 0x00004000 // Enable Request to Send +#define UART_CTL_RI 0x00002000 // Ring Indicator +#define UART_CTL_DCD 0x00001000 // Data Carrier Detect +#define UART_CTL_RTS 0x00000800 // Request to Send +#define UART_CTL_DTR 0x00000400 // Data Terminal Ready +#define UART_CTL_RXE 0x00000200 // UART Receive Enable +#define UART_CTL_TXE 0x00000100 // UART Transmit Enable +#define UART_CTL_LBE 0x00000080 // UART Loop Back Enable +#define UART_CTL_LIN 0x00000040 // LIN Mode Enable +#define UART_CTL_HSE 0x00000020 // High-Speed Enable +#define UART_CTL_EOT 0x00000010 // End of Transmission +#define UART_CTL_SMART 0x00000008 // ISO 7816 Smart Card Support +#define UART_CTL_SIRLP 0x00000004 // UART SIR Low-Power Mode +#define UART_CTL_SIREN 0x00000002 // UART SIR Enable +#define UART_CTL_UARTEN 0x00000001 // UART Enable +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IFLS register. +// +//****************************************************************************** +#define UART_IFLS_RX_M 0x00000038 // UART Receive Interrupt FIFO + // Level Select +#define UART_IFLS_RX_S 3 +#define UART_IFLS_TX_M 0x00000007 // UART Transmit Interrupt FIFO + // Level Select +#define UART_IFLS_TX_S 0 +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IM register. +// +//****************************************************************************** +#define UART_IM_DMATXIM 0x00020000 // Transmit DMA Interrupt Mask +#define UART_IM_DMARXIM 0x00010000 // Receive DMA Interrupt Mask +#define UART_IM_LME5IM 0x00008000 // LIN Mode Edge 5 Interrupt Mask +#define UART_IM_LME1IM 0x00004000 // LIN Mode Edge 1 Interrupt Mask +#define UART_IM_LMSBIM 0x00002000 // LIN Mode Sync Break Interrupt + // Mask +#define UART_IM_9BITIM 0x00001000 // 9-Bit Mode Interrupt Mask +#define UART_IM_EOTIM 0x00000800 // End of Transmission Interrupt + // Mask +#define UART_IM_OEIM 0x00000400 // UART Overrun Error Interrupt + // Mask +#define UART_IM_BEIM 0x00000200 // UART Break Error Interrupt Mask +#define UART_IM_PEIM 0x00000100 // UART Parity Error Interrupt Mask +#define UART_IM_FEIM 0x00000080 // UART Framing Error Interrupt + // Mask +#define UART_IM_RTIM 0x00000040 // UART Receive Time-Out Interrupt + // Mask +#define UART_IM_TXIM 0x00000020 // UART Transmit Interrupt Mask +#define UART_IM_RXIM 0x00000010 // UART Receive Interrupt Mask +#define UART_IM_DSRMIM 0x00000008 // UART Data Set Ready Modem + // Interrupt Mask +#define UART_IM_DCDMIM 0x00000004 // UART Data Carrier Detect Modem + // Interrupt Mask +#define UART_IM_CTSMIM 0x00000002 // UART Clear to Send Modem + // Interrupt Mask +#define UART_IM_RIMIM 0x00000001 // UART Ring Indicator Modem + // Interrupt Mask +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_RIS register. +// +//****************************************************************************** +#define UART_RIS_DMATXRIS 0x00020000 // Transmit DMA Raw Interrupt + // Status +#define UART_RIS_DMARXRIS 0x00010000 // Receive DMA Raw Interrupt Status +#define UART_RIS_LME5RIS 0x00008000 // LIN Mode Edge 5 Raw Interrupt + // Status +#define UART_RIS_LME1RIS 0x00004000 // LIN Mode Edge 1 Raw Interrupt + // Status +#define UART_RIS_LMSBRIS 0x00002000 // LIN Mode Sync Break Raw + // Interrupt Status +#define UART_RIS_9BITRIS 0x00001000 // 9-Bit Mode Raw Interrupt Status +#define UART_RIS_EOTRIS 0x00000800 // End of Transmission Raw + // Interrupt Status +#define UART_RIS_OERIS 0x00000400 // UART Overrun Error Raw Interrupt + // Status +#define UART_RIS_BERIS 0x00000200 // UART Break Error Raw Interrupt + // Status +#define UART_RIS_PERIS 0x00000100 // UART Parity Error Raw Interrupt + // Status +#define UART_RIS_FERIS 0x00000080 // UART Framing Error Raw Interrupt + // Status +#define UART_RIS_RTRIS 0x00000040 // UART Receive Time-Out Raw + // Interrupt Status +#define UART_RIS_TXRIS 0x00000020 // UART Transmit Raw Interrupt + // Status +#define UART_RIS_RXRIS 0x00000010 // UART Receive Raw Interrupt + // Status +#define UART_RIS_DSRRIS 0x00000008 // UART Data Set Ready Modem Raw + // Interrupt Status +#define UART_RIS_DCDRIS 0x00000004 // UART Data Carrier Detect Modem + // Raw Interrupt Status +#define UART_RIS_CTSRIS 0x00000002 // UART Clear to Send Modem Raw + // Interrupt Status +#define UART_RIS_RIRIS 0x00000001 // UART Ring Indicator Modem Raw + // Interrupt Status +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_MIS register. +// +//****************************************************************************** +#define UART_MIS_DMATXMIS 0x00020000 // Transmit DMA Masked Interrupt + // Status +#define UART_MIS_DMARXMIS 0x00010000 // Receive DMA Masked Interrupt + // Status +#define UART_MIS_LME5MIS 0x00008000 // LIN Mode Edge 5 Masked Interrupt + // Status +#define UART_MIS_LME1MIS 0x00004000 // LIN Mode Edge 1 Masked Interrupt + // Status +#define UART_MIS_LMSBMIS 0x00002000 // LIN Mode Sync Break Masked + // Interrupt Status +#define UART_MIS_9BITMIS 0x00001000 // 9-Bit Mode Masked Interrupt + // Status +#define UART_MIS_EOTMIS 0x00000800 // End of Transmission Masked + // Interrupt Status +#define UART_MIS_OEMIS 0x00000400 // UART Overrun Error Masked + // Interrupt Status +#define UART_MIS_BEMIS 0x00000200 // UART Break Error Masked + // Interrupt Status +#define UART_MIS_PEMIS 0x00000100 // UART Parity Error Masked + // Interrupt Status +#define UART_MIS_FEMIS 0x00000080 // UART Framing Error Masked + // Interrupt Status +#define UART_MIS_RTMIS 0x00000040 // UART Receive Time-Out Masked + // Interrupt Status +#define UART_MIS_TXMIS 0x00000020 // UART Transmit Masked Interrupt + // Status +#define UART_MIS_RXMIS 0x00000010 // UART Receive Masked Interrupt + // Status +#define UART_MIS_DSRMIS 0x00000008 // UART Data Set Ready Modem Masked + // Interrupt Status +#define UART_MIS_DCDMIS 0x00000004 // UART Data Carrier Detect Modem + // Masked Interrupt Status +#define UART_MIS_CTSMIS 0x00000002 // UART Clear to Send Modem Masked + // Interrupt Status +#define UART_MIS_RIMIS 0x00000001 // UART Ring Indicator Modem Masked + // Interrupt Status +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ICR register. +// +//****************************************************************************** +#define UART_ICR_DMATXIC 0x00020000 // Transmit DMA Interrupt Clear +#define UART_ICR_DMARXIC 0x00010000 // Receive DMA Interrupt Clear +#define UART_ICR_LME5MIC 0x00008000 // LIN Mode Edge 5 Interrupt Clear +#define UART_ICR_LME1MIC 0x00004000 // LIN Mode Edge 1 Interrupt Clear +#define UART_ICR_LMSBMIC 0x00002000 // LIN Mode Sync Break Interrupt + // Clear +#define UART_ICR_9BITIC 0x00001000 // 9-Bit Mode Interrupt Clear +#define UART_ICR_EOTIC 0x00000800 // End of Transmission Interrupt + // Clear +#define UART_ICR_OEIC 0x00000400 // Overrun Error Interrupt Clear +#define UART_ICR_BEIC 0x00000200 // Break Error Interrupt Clear +#define UART_ICR_PEIC 0x00000100 // Parity Error Interrupt Clear +#define UART_ICR_FEIC 0x00000080 // Framing Error Interrupt Clear +#define UART_ICR_RTIC 0x00000040 // Receive Time-Out Interrupt Clear +#define UART_ICR_TXIC 0x00000020 // Transmit Interrupt Clear +#define UART_ICR_RXIC 0x00000010 // Receive Interrupt Clear +#define UART_ICR_DSRMIC 0x00000008 // UART Data Set Ready Modem + // Interrupt Clear +#define UART_ICR_DCDMIC 0x00000004 // UART Data Carrier Detect Modem + // Interrupt Clear +#define UART_ICR_CTSMIC 0x00000002 // UART Clear to Send Modem + // Interrupt Clear +#define UART_ICR_RIMIC 0x00000001 // UART Ring Indicator Modem + // Interrupt Clear +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_DMACTL register. +// +//****************************************************************************** +#define UART_DMACTL_DMAERR 0x00000004 // DMA on Error +#define UART_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable +#define UART_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_LCTL register. +// +//****************************************************************************** +#define UART_LCTL_BLEN_M 0x00000030 // Sync Break Length 0x00000000 : + // UART_LCTL_BLEN_13T : Sync break + // length is 13T bits (default) + // 0x00000010 : UART_LCTL_BLEN_14T : + // Sync break length is 14T bits + // 0x00000020 : UART_LCTL_BLEN_15T : + // Sync break length is 15T bits + // 0x00000030 : UART_LCTL_BLEN_16T : + // Sync break length is 16T bits +#define UART_LCTL_BLEN_S 4 +#define UART_LCTL_MASTER 0x00000001 // LIN Master Enable +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_LSS register. +// +//****************************************************************************** +#define UART_LSS_TSS_M 0x0000FFFF // Timer Snap Shot +#define UART_LSS_TSS_S 0 +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_LTIM register. +// +//****************************************************************************** +#define UART_LTIM_TIMER_M 0x0000FFFF // Timer Value +#define UART_LTIM_TIMER_S 0 +//****************************************************************************** +// +// The following are defines for the bit fields in the +// UART_O_9BITADDR register. +// +//****************************************************************************** +#define UART_9BITADDR_9BITEN \ + 0x00008000 // Enable 9-Bit Mode + +#define UART_9BITADDR_ADDR_M \ + 0x000000FF // Self Address for 9-Bit Mode + +#define UART_9BITADDR_ADDR_S 0 +//****************************************************************************** +// +// The following are defines for the bit fields in the +// UART_O_9BITAMASK register. +// +//****************************************************************************** +#define UART_9BITAMASK_RANGE_M \ + 0x0000FF00 // Self Address Range for 9-Bit + // Mode + +#define UART_9BITAMASK_RANGE_S 8 +#define UART_9BITAMASK_MASK_M \ + 0x000000FF // Self Address Mask for 9-Bit Mode + +#define UART_9BITAMASK_MASK_S 0 +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_PP register. +// +//****************************************************************************** +#define UART_PP_MSE 0x00000008 // Modem Support Extended +#define UART_PP_MS 0x00000004 // Modem Support +#define UART_PP_NB 0x00000002 // 9-Bit Support +#define UART_PP_SC 0x00000001 // Smart Card Support +//****************************************************************************** +// +// The following are defines for the bit fields in the UART_O_CC register. +// +//****************************************************************************** +#define UART_CC_CS_M 0x0000000F // UART Baud Clock Source + // 0x00000005 : UART_CC_CS_PIOSC : + // PIOSC 0x00000000 : + // UART_CC_CS_SYSCLK : The system + // clock (default) +#define UART_CC_CS_S 0 + + + +#endif // __HW_UART_H__ |