diff options
| author | Damien George <damien.p.george@gmail.com> | 2017-03-30 17:59:36 +1100 |
|---|---|---|
| committer | Damien George <damien.p.george@gmail.com> | 2017-03-30 17:59:36 +1100 |
| commit | 41cbe8045e5915dba17261f596a1d96895970d36 (patch) | |
| tree | 804a11a2c7cb791ae59ea06e4789fedd9daafbef /stmhal | |
| parent | c74fa7f58ece5e128f35a60e56fbb9a24ddf88b3 (diff) | |
| download | micropython-41cbe8045e5915dba17261f596a1d96895970d36.tar.gz micropython-41cbe8045e5915dba17261f596a1d96895970d36.zip | |
stmhal/boards/STM32F769DISC: Fix user switch pin, and document stlink.
Diffstat (limited to 'stmhal')
| -rw-r--r-- | stmhal/boards/STM32F769DISC/mpconfigboard.h | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/stmhal/boards/STM32F769DISC/mpconfigboard.h b/stmhal/boards/STM32F769DISC/mpconfigboard.h index 96706be885..72465c7994 100644 --- a/stmhal/boards/STM32F769DISC/mpconfigboard.h +++ b/stmhal/boards/STM32F769DISC/mpconfigboard.h @@ -1,4 +1,5 @@ -//This board is only confirmed to operate using openocd. +// This board is confirmed to operate using stlink and openocd. +// REPL is on UART(1) and is available through the stlink USB-UART device. // To use openocd run "OPENOCD_CONFIG=boards/openocd_stm32f7.cfg" in // the make command. #define MICROPY_HW_BOARD_NAME "F769DISC" @@ -54,7 +55,7 @@ #define MICROPY_HW_SPI2_MOSI (pin_B15) // USRSW is pulled low. Pressing the button makes the input go high. -#define MICROPY_HW_USRSW_PIN (pin_I11) +#define MICROPY_HW_USRSW_PIN (pin_A0) #define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) #define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_RISING) #define MICROPY_HW_USRSW_PRESSED (1) |