drivers, cc3k: Move cc3000 driver from stmhal to drivers directory.

14 files changed, 3036 insertions, 0 deletions

diff --git a/drivers/cc3000/inc/cc3000_common.h b/drivers/cc3000/inc/cc3000_common.h
new file mode 100644
index 0000000000..b0419a4e79
--- /dev/null
+++ b/drivers/cc3000/inc/cc3000_common.h
@@ -0,0 +1,360 @@
+/*****************************************************************************
+*
+*  cc3000_common.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __COMMON_H__
+#define __COMMON_H__
+
+#include "data_types.h"
+
+//******************************************************************************
+// Include files
+//******************************************************************************
+#include <stdlib.h>
+#include <stdint.h>
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+extern int errno;
+
+//*****************************************************************************
+//                  ERROR CODES
+//*****************************************************************************
+#define ESUCCESS        0
+#define EFAIL          -1
+#define EERROR          EFAIL
+
+//*****************************************************************************
+//                  COMMON DEFINES
+//*****************************************************************************
+#define ERROR_SOCKET_INACTIVE   -57 
+
+#define WLAN_ENABLE      (1)   
+#define WLAN_DISABLE     (0)
+
+#define	MAC_ADDR_LEN	(6)
+
+#define	SP_PORTION_SIZE	(32)
+  
+/*Defines for minimal and maximal RX buffer size. This size includes the spi 
+  header and hci header.
+  The maximal buffer size derives from:
+    MTU + HCI header + SPI header + sendto() agrs size
+  The minimum buffer size derives from:
+    HCI header + SPI header + max args size
+
+  This buffer is used for receiving events and data.
+  The packet can not be longer than MTU size and CC3000 does not support 
+  fragmentation. Note that the same buffer is used for reception of the data 
+  and events from CC3000. That is why the minimum is defined. 
+  The calculation for the actual size of buffer for reception is:
+  Given the maximal data size MAX_DATA that is expected to be received by
+  application, the required buffer is:
+  Using recv() or recvfrom():
+ 
+    max(CC3000_MINIMAL_RX_SIZE, MAX_DATA + HEADERS_SIZE_DATA + fromlen
+    + ucArgsize + 1)
+ 
+  Using gethostbyname() with minimal buffer size will limit the host name
+  returned to 99 bytes only.
+  The 1 is used for the overrun detection 
+
+  Buffer size increased to 130 following the add_profile() with WEP security
+  which requires TX buffer size of 130 bytes: 
+  HEADERS_SIZE_EVNT + WLAN_ADD_PROFILE_WEP_PARAM_LEN + MAX SSID LEN + 4 * MAX KEY LEN = 130
+  MAX SSID LEN = 32 
+  MAX SSID LEN = 13 (with add_profile only ascii key setting is supported, 
+  therfore maximum key size is 13)
+*/
+
+#define CC3000_MINIMAL_RX_SIZE      (130 + 1)
+#define CC3000_MAXIMAL_RX_SIZE      (1519 + 1)
+
+/*Defines for minimal and maximal TX buffer size.
+  This buffer is used for sending events and data.
+  The packet can not be longer than MTU size and CC3000 does not support 
+  fragmentation. Note that the same buffer is used for transmission of the data
+  and commands. That is why the minimum is defined.
+  The calculation for the actual size of buffer for transmission is:
+  Given the maximal data size MAX_DATA, the required buffer is:
+  Using Sendto():
+ 
+   max(CC3000_MINIMAL_TX_SIZE, MAX_DATA + SPI_HEADER_SIZE
+   + SOCKET_SENDTO_PARAMS_LEN + SIMPLE_LINK_HCI_DATA_HEADER_SIZE + 1)
+ 
+  Using Send():
+ 
+   max(CC3000_MINIMAL_TX_SIZE, MAX_DATA + SPI_HEADER_SIZE
+   + HCI_CMND_SEND_ARG_LENGTH + SIMPLE_LINK_HCI_DATA_HEADER_SIZE + 1)
+ 
+  The 1 is used for the overrun detection */ 
+
+#define	CC3000_MINIMAL_TX_SIZE      (130 + 1)  
+#define	CC3000_MAXIMAL_TX_SIZE      (1519 + 1)
+
+//TX and RX buffer sizes, allow to receive and transmit maximum data at length 8.
+#ifdef CC3000_TINY_DRIVER
+#define TINY_CC3000_MAXIMAL_RX_SIZE 44
+#define TINY_CC3000_MAXIMAL_TX_SIZE 59
+#endif
+
+/*In order to determine your preferred buffer size, 
+  change CC3000_MAXIMAL_RX_SIZE and CC3000_MAXIMAL_TX_SIZE to a value between
+  the minimal and maximal specified above. 
+  Note that the buffers are allocated by SPI.
+  In case you change the size of those buffers, you might need also to change
+  the linker file, since for example on MSP430 FRAM devices the buffers are
+  allocated in the FRAM section that is allocated manually and not by IDE.
+*/
+  
+#ifndef CC3000_TINY_DRIVER
+  
+	#define CC3000_RX_BUFFER_SIZE   (CC3000_MAXIMAL_RX_SIZE)
+	#define CC3000_TX_BUFFER_SIZE   (CC3000_MAXIMAL_TX_SIZE)
+  
+//if defined TINY DRIVER we use smaller RX and TX buffer in order to minimize RAM consumption
+#else
+	#define CC3000_RX_BUFFER_SIZE   (TINY_CC3000_MAXIMAL_RX_SIZE)
+	#define CC3000_TX_BUFFER_SIZE   (TINY_CC3000_MAXIMAL_TX_SIZE)
+
+#endif  
+
+//*****************************************************************************
+//                  Compound Types
+//*****************************************************************************
+typedef INT32 time_t;
+typedef UINT32 clock_t;
+typedef INT32 suseconds_t;
+
+typedef struct timeval timeval;
+
+struct timeval 
+{
+    time_t         tv_sec;                  /* seconds */
+    suseconds_t    tv_usec;                 /* microseconds */
+};
+
+typedef CHAR *(*tFWPatches)(UINT32 *usLength);
+
+typedef CHAR *(*tDriverPatches)(UINT32 *usLength);
+
+typedef CHAR *(*tBootLoaderPatches)(UINT32 *usLength);
+
+typedef void (*tWlanCB)(INT32 event_type, CHAR * data, UINT8 length );
+
+typedef INT32 (*tWlanReadInteruptPin)(void);
+
+typedef void (*tWlanInterruptEnable)(void);
+
+typedef void (*tWlanInterruptDisable)(void);
+
+typedef void (*tWriteWlanPin)(UINT8 val);
+
+typedef struct
+{
+	UINT16	 usRxEventOpcode;
+	UINT16	 usEventOrDataReceived;
+	UINT8 	*pucReceivedData;
+	UINT8 	*pucTxCommandBuffer;
+
+	tFWPatches 			sFWPatches;
+	tDriverPatches 		sDriverPatches;
+	tBootLoaderPatches 	sBootLoaderPatches;
+	tWlanCB	 			sWlanCB;
+    tWlanReadInteruptPin  ReadWlanInterruptPin;
+    tWlanInterruptEnable  WlanInterruptEnable;
+    tWlanInterruptDisable WlanInterruptDisable;
+    tWriteWlanPin         WriteWlanPin;
+
+	INT32		 slTransmitDataError;
+	UINT16	 usNumberOfFreeBuffers;
+	UINT16	 usSlBufferLength;
+	UINT16	 usBufferSize;
+	UINT16	 usRxDataPending;
+
+	UINT32    NumberOfSentPackets;
+	UINT32    NumberOfReleasedPackets;
+
+	UINT8	 InformHostOnTxComplete;
+}sSimplLinkInformation;
+
+extern volatile sSimplLinkInformation tSLInformation;
+
+
+//*****************************************************************************
+// Prototypes for the APIs.
+//*****************************************************************************
+
+
+
+//*****************************************************************************
+//
+//!  SimpleLinkWaitEvent
+//!
+//!  @param  usOpcode      command operation code
+//!  @param  pRetParams    command return parameters
+//!
+//!  @return               none
+//!
+//!  @brief                Wait for event, pass it to the hci_event_handler and
+//!                        update the event opcode in a global variable.
+//
+//*****************************************************************************
+
+extern void SimpleLinkWaitEvent(UINT16 usOpcode, void *pRetParams);
+
+//*****************************************************************************
+//
+//!  SimpleLinkWaitData
+//!
+//!  @param  pBuf       data buffer
+//!  @param  from       from information
+//!  @param  fromlen	  from information length
+//!
+//!  @return               none
+//!
+//!  @brief                Wait for data, pass it to the hci_event_handler
+//! 					   and update in a global variable that there is 
+//!						   data to read.
+//
+//*****************************************************************************
+
+extern void SimpleLinkWaitData(UINT8 *pBuf, UINT8 *from, UINT8 *fromlen);
+
+//*****************************************************************************
+//
+//!  UINT32_TO_STREAM_f
+//!
+//!  \param  p       pointer to the new stream
+//!  \param  u32     pointer to the 32 bit
+//!
+//!  \return               pointer to the new stream
+//!
+//!  \brief                This function is used for copying 32 bit to stream
+//!						   while converting to little endian format.
+//
+//*****************************************************************************
+
+extern UINT8* UINT32_TO_STREAM_f (UINT8 *p, UINT32 u32);
+
+//*****************************************************************************
+//
+//!  UINT16_TO_STREAM_f
+//!
+//!  \param  p       pointer to the new stream
+//!  \param  u32     pointer to the 16 bit
+//!
+//!  \return               pointer to the new stream
+//!
+//!  \brief               This function is used for copying 16 bit to stream 
+//!                       while converting to little endian format.
+//
+//*****************************************************************************
+
+extern UINT8* UINT16_TO_STREAM_f (UINT8 *p, UINT16 u16);
+
+//*****************************************************************************
+//
+//!  STREAM_TO_UINT16_f
+//!
+//!  \param  p          pointer to the stream
+//!  \param  offset     offset in the stream
+//!
+//!  \return               pointer to the new 16 bit
+//!
+//!  \brief               This function is used for copying received stream to 
+//!                       16 bit in little endian format.
+//
+//*****************************************************************************
+
+extern UINT16 STREAM_TO_UINT16_f(CHAR* p, UINT16 offset);
+
+//*****************************************************************************
+//
+//!  STREAM_TO_UINT32_f
+//!
+//!  \param  p          pointer to the stream
+//!  \param  offset     offset in the stream
+//!
+//!  \return               pointer to the new 32 bit
+//!
+//!  \brief               This function is used for copying received stream to
+//!                       32 bit in little endian format.
+//
+//*****************************************************************************
+
+extern UINT32 STREAM_TO_UINT32_f(CHAR* p, UINT16 offset);
+
+
+//*****************************************************************************
+//                    COMMON MACROs
+//*****************************************************************************
+
+
+//This macro is used for copying 8 bit to stream while converting to little endian format.
+#define UINT8_TO_STREAM(_p, _val)	{*(_p)++ = (_val);}
+//This macro is used for copying 16 bit to stream while converting to little endian format.
+#define UINT16_TO_STREAM(_p, _u16)	(UINT16_TO_STREAM_f(_p, _u16))
+//This macro is used for copying 32 bit to stream while converting to little endian format.
+#define UINT32_TO_STREAM(_p, _u32)	(UINT32_TO_STREAM_f(_p, _u32))
+//This macro is used for copying a specified value length bits (l) to stream while converting to little endian format.
+#define ARRAY_TO_STREAM(p, a, l) 	{register INT16 _i; for (_i = 0; _i < l; _i++) *(p)++ = ((UINT8 *) a)[_i];}
+//This macro is used for copying received stream to 8 bit in little endian format.
+#define STREAM_TO_UINT8(_p, _offset, _u8)	{_u8 = (UINT8)(*(_p + _offset));}
+//This macro is used for copying received stream to 16 bit in little endian format.
+#define STREAM_TO_UINT16(_p, _offset, _u16)	{_u16 = STREAM_TO_UINT16_f(_p, _offset);}
+//This macro is used for copying received stream to 32 bit in little endian format.
+#define STREAM_TO_UINT32(_p, _offset, _u32)	{_u32 = STREAM_TO_UINT32_f(_p, _offset);}
+#define STREAM_TO_STREAM(p, a, l) 	{register INT16 _i; for (_i = 0; _i < l; _i++) *(a)++= ((UINT8 *) p)[_i];}
+
+
+
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+}
+#endif // __cplusplus
+
+#endif // __COMMON_H__
diff --git a/drivers/cc3000/inc/ccspi.h b/drivers/cc3000/inc/ccspi.h
new file mode 100644
index 0000000000..4f5e2a2bbf
--- /dev/null
+++ b/drivers/cc3000/inc/ccspi.h
@@ -0,0 +1,85 @@
+/*****************************************************************************
+*
+*  spi.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+
+
+#ifndef __SPI_H__
+#define __SPI_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+typedef void (*gcSpiHandleRx)(void *p);
+typedef void (*gcSpiHandleTx)(void);
+extern unsigned char wlan_tx_buffer[];
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+
+// the arguments must be of type pin_obj_t* and SPI_HandleTypeDef*
+extern void SpiInit(void *spi, const void *pin_cs, const void *pin_en, const void *pin_irq);
+
+extern void SpiOpen(gcSpiHandleRx pfRxHandler);
+extern void SpiClose(void);
+extern void SpiPauseSpi(void);
+extern void SpiResumeSpi(void);
+extern long SpiWrite(unsigned char *pUserBuffer, unsigned short usLength);
+extern void SpiResumeSpi(void);
+extern void SpiConfigureHwMapping(void);
+extern void SpiCleanGPIOISR(void);
+extern void SSIConfigure(unsigned long ulSSIFreq, unsigned long bForceGpioConfiguration, unsigned long uiReconfigureSysClock);
+extern int init_spi(void);
+extern long ReadWlanInterruptPin(void);
+extern void WriteWlanPin(unsigned char val);
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+}
+#endif // __cplusplus
+
+#endif
+
diff --git a/drivers/cc3000/inc/data_types.h b/drivers/cc3000/inc/data_types.h
new file mode 100644
index 0000000000..71d65d00bb
--- /dev/null
+++ b/drivers/cc3000/inc/data_types.h
@@ -0,0 +1,107 @@
+/*****************************************************************************
+*
+*  data_types.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __DATA_TYPES__
+#define __DATA_TYPES__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+
+#ifndef NULL
+#define NULL        		(0)
+#endif
+
+#ifndef FALSE
+#define FALSE       		(0)
+#endif
+
+#ifndef TRUE
+#define TRUE        		(!FALSE)
+#endif
+
+#ifndef OK
+#define OK          		(0)
+#endif
+
+#ifndef _INT8
+#define _INT8
+typedef signed char   		INT8;
+#endif
+
+#ifndef _UINT8
+#define _UINT8
+typedef unsigned char   	UINT8;
+#endif
+
+#ifndef _INT16
+#define _INT16
+typedef signed short  		INT16;
+#endif
+
+#ifndef _UINT16
+#define _UINT16
+typedef unsigned short   	UINT16;
+#endif
+
+#ifndef _BOOLEAN
+#define _BOOLEAN
+typedef unsigned char   	BOOLEAN;
+#endif
+
+#ifndef _INT32
+#define _INT32
+typedef signed long   		INT32;
+#endif
+
+#ifndef _UINT32
+#define _UINT32
+typedef unsigned long   	UINT32;
+#endif
+
+typedef int             	INT;
+typedef char            	CHAR;
+
+#ifdef	__cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __DATA_TYPE__ */
diff --git a/drivers/cc3000/inc/evnt_handler.h b/drivers/cc3000/inc/evnt_handler.h
new file mode 100644
index 0000000000..45ac7ed825
--- /dev/null
+++ b/drivers/cc3000/inc/evnt_handler.h
@@ -0,0 +1,166 @@
+/*****************************************************************************
+*
+*  evnt_handler.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __EVENT_HANDLER_H__
+#define __EVENT_HANDLER_H__
+#include "hci.h"
+#include "socket.h"
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+//!  hci_event_handler
+//!
+//!  @param  pRetParams     incoming data buffer
+//!  @param  from           from information (in case of data received)
+//!  @param  fromlen        from information length (in case of data received)
+//!
+//!  @return         none
+//!
+//!  @brief          Parse the incoming events packets and issues corresponding
+//!                  event handler from global array of handlers pointers
+//
+//*****************************************************************************
+extern UINT8 *hci_event_handler(void *pRetParams, UINT8 *from, UINT8 *fromlen);
+
+//*****************************************************************************
+//
+//!  hci_unsol_event_handler
+//!
+//!  @param  event_hdr   event header
+//!
+//!  @return             1 if event supported and handled
+//!                      0 if event is not supported
+//!
+//!  @brief              Handle unsolicited events
+//
+//*****************************************************************************
+extern INT32 hci_unsol_event_handler(CHAR *event_hdr);
+
+//*****************************************************************************
+//
+//!  hci_unsolicited_event_handler
+//!
+//!  @param None
+//!
+//!  @return         ESUCCESS if successful, EFAIL if an error occurred
+//!
+//!  @brief          Parse the incoming unsolicited event packets and issues 
+//!                  corresponding event handler.
+//
+//*****************************************************************************
+extern INT32 hci_unsolicited_event_handler(void);
+
+#define M_BSD_RESP_PARAMS_OFFSET(hci_event_hdr)((CHAR *)(hci_event_hdr) + HCI_EVENT_HEADER_SIZE)
+
+#define SOCKET_STATUS_ACTIVE       0
+#define SOCKET_STATUS_INACTIVE     1
+/* Init socket_active_status = 'all ones': init all sockets with SOCKET_STATUS_INACTIVE.
+   Will be changed by 'set_socket_active_status' upon 'connect' and 'accept' calls */
+#define SOCKET_STATUS_INIT_VAL  0xFFFF
+#define M_IS_VALID_SD(sd) ((0 <= (sd)) && ((sd) <= 7))
+#define M_IS_VALID_STATUS(status) (((status) == SOCKET_STATUS_ACTIVE)||((status) == SOCKET_STATUS_INACTIVE))
+
+extern UINT32 socket_active_status;
+
+extern void set_socket_active_status(INT32 Sd, INT32 Status);
+extern INT32 get_socket_active_status(INT32 Sd);
+
+typedef struct _bsd_accept_return_t
+{
+    INT32             iSocketDescriptor;
+    INT32             iStatus;
+    sockaddr   		tSocketAddress;
+    
+} tBsdReturnParams;
+
+
+typedef struct _bsd_read_return_t
+{
+    INT32             iSocketDescriptor;
+    INT32             iNumberOfBytes;
+    UINT32	 uiFlags;
+} tBsdReadReturnParams;
+
+#define BSD_RECV_FROM_FROMLEN_OFFSET	(4)
+#define BSD_RECV_FROM_FROM_OFFSET		(16)
+
+
+typedef struct _bsd_select_return_t
+{
+    INT32					iStatus;
+	UINT32 			uiRdfd;
+	UINT32 			uiWrfd;
+	UINT32 			uiExfd;
+} tBsdSelectRecvParams;
+
+
+typedef struct _bsd_getsockopt_return_t
+{
+	UINT8			ucOptValue[4];
+	CHAR						iStatus;
+} tBsdGetSockOptReturnParams;
+
+typedef struct _bsd_gethostbyname_return_t
+{
+    INT32             retVal;
+    INT32             outputAddress;
+} tBsdGethostbynameParams;
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+}
+#endif // __cplusplus
+
+#endif // __EVENT_HANDLER_H__
+
diff --git a/drivers/cc3000/inc/hci.h b/drivers/cc3000/inc/hci.h
new file mode 100644
index 0000000000..f6207e5625
--- /dev/null
+++ b/drivers/cc3000/inc/hci.h
@@ -0,0 +1,330 @@
+/*****************************************************************************
+*
+*  hci.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __HCI_H__
+#define __HCI_H__
+
+#include "cc3000_common.h"
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+
+#define SPI_HEADER_SIZE 				   			(5)
+#define SIMPLE_LINK_HCI_CMND_HEADER_SIZE 			(4)
+#define HEADERS_SIZE_CMD        					(SPI_HEADER_SIZE + SIMPLE_LINK_HCI_CMND_HEADER_SIZE)
+#define SIMPLE_LINK_HCI_DATA_CMND_HEADER_SIZE 		(5)
+#define SIMPLE_LINK_HCI_DATA_HEADER_SIZE 			(5)
+#define SIMPLE_LINK_HCI_PATCH_HEADER_SIZE 			(2)
+
+
+//*****************************************************************************
+//
+// Values that can be used as HCI Commands and HCI Packet header defines
+//
+//*****************************************************************************
+#define  HCI_TYPE_CMND          0x1
+#define  HCI_TYPE_DATA          0x2
+#define  HCI_TYPE_PATCH         0x3
+#define  HCI_TYPE_EVNT          0x4
+
+
+#define HCI_EVENT_PATCHES_DRV_REQ			(1)
+#define HCI_EVENT_PATCHES_FW_REQ			(2)
+#define HCI_EVENT_PATCHES_BOOTLOAD_REQ		(3)
+
+
+#define  HCI_CMND_WLAN_BASE  (0x0000)
+#define  HCI_CMND_WLAN_CONNECT  0x0001
+#define  HCI_CMND_WLAN_DISCONNECT   0x0002
+#define  HCI_CMND_WLAN_IOCTL_SET_SCANPARAM    0x0003
+#define  HCI_CMND_WLAN_IOCTL_SET_CONNECTION_POLICY  0x0004
+#define  HCI_CMND_WLAN_IOCTL_ADD_PROFILE  0x0005
+#define  HCI_CMND_WLAN_IOCTL_DEL_PROFILE  0x0006
+#define  HCI_CMND_WLAN_IOCTL_GET_SCAN_RESULTS  0x0007
+#define  HCI_CMND_EVENT_MASK    0x0008
+#define  HCI_CMND_WLAN_IOCTL_STATUSGET 0x0009
+#define  HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_START        0x000A
+#define  HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_STOP         0x000B
+#define  HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_SET_PREFIX   0x000C
+#define  HCI_CMND_WLAN_CONFIGURE_PATCH					0x000D
+
+
+#define  HCI_CMND_SOCKET_BASE   0x1000
+#define  HCI_CMND_SOCKET        0x1001
+#define  HCI_CMND_BIND          0x1002
+#define  HCI_CMND_RECV          0x1004
+#define  HCI_CMND_ACCEPT        0x1005
+#define  HCI_CMND_LISTEN        0x1006
+#define  HCI_CMND_CONNECT       0x1007
+#define  HCI_CMND_BSD_SELECT 	0x1008
+#define  HCI_CMND_SETSOCKOPT    0x1009
+#define  HCI_CMND_GETSOCKOPT    0x100A
+#define  HCI_CMND_CLOSE_SOCKET  0x100B
+#define  HCI_CMND_RECVFROM      0x100D
+#define  HCI_CMND_GETHOSTNAME   0x1010
+#define  HCI_CMND_MDNS_ADVERTISE	   0x1011
+#define  HCI_CMND_GETMSSVALUE		0x1012
+
+
+#define HCI_DATA_BASE								0x80
+
+#define HCI_CMND_SEND           					(0x01 + HCI_DATA_BASE)
+#define HCI_CMND_SENDTO        						(0x03 + HCI_DATA_BASE)
+#define HCI_DATA_BSD_RECVFROM						(0x04 + HCI_DATA_BASE)
+#define HCI_DATA_BSD_RECV							(0x05 + HCI_DATA_BASE)
+
+
+#define HCI_CMND_NVMEM_CBASE		(0x0200)
+
+
+#define HCI_CMND_NVMEM_CREATE_ENTRY (0x0203)
+#define HCI_CMND_NVMEM_SWAP_ENTRY  	(0x0205)
+#define HCI_CMND_NVMEM_READ    		(0x0201)
+#define HCI_CMND_NVMEM_WRITE   		(0x0090)
+#define HCI_CMND_NVMEM_WRITE_PATCH	(0x0204)
+#define HCI_CMND_READ_SP_VERSION  	(0x0207)
+
+#define  HCI_CMND_READ_BUFFER_SIZE  0x400B
+#define  HCI_CMND_SIMPLE_LINK_START 0x4000
+
+#define HCI_CMND_NETAPP_BASE		0x2000
+
+#define HCI_NETAPP_DHCP				    (0x0001 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_PING_SEND                        (0x0002 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_PING_REPORT                      (0x0003 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_PING_STOP                        (0x0004 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_IPCONFIG                         (0x0005 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_ARP_FLUSH			    (0x0006 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_SET_DEBUG_LEVEL					(0x0008 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_SET_TIMERS						(0x0009 + HCI_CMND_NETAPP_BASE)
+
+
+
+
+
+
+//*****************************************************************************
+//
+// Values that can be used as HCI Events defines
+//
+//*****************************************************************************
+#define  HCI_EVNT_WLAN_BASE     0x0000
+#define  HCI_EVNT_WLAN_CONNECT  0x0001
+#define  HCI_EVNT_WLAN_DISCONNECT \
+                                0x0002
+#define  HCI_EVNT_WLAN_IOCTL_ADD_PROFILE  \
+                                0x0005
+
+
+#define  HCI_EVNT_SOCKET              HCI_CMND_SOCKET
+#define  HCI_EVNT_BIND                HCI_CMND_BIND
+#define  HCI_EVNT_RECV                HCI_CMND_RECV
+#define  HCI_EVNT_ACCEPT              HCI_CMND_ACCEPT
+#define  HCI_EVNT_LISTEN              HCI_CMND_LISTEN
+#define  HCI_EVNT_CONNECT             HCI_CMND_CONNECT
+#define  HCI_EVNT_SELECT              HCI_CMND_BSD_SELECT
+#define  HCI_EVNT_CLOSE_SOCKET        HCI_CMND_CLOSE_SOCKET
+#define  HCI_EVNT_RECVFROM            HCI_CMND_RECVFROM
+#define  HCI_EVNT_SETSOCKOPT          HCI_CMND_SETSOCKOPT
+#define  HCI_EVNT_GETSOCKOPT          HCI_CMND_GETSOCKOPT
+#define  HCI_EVNT_BSD_GETHOSTBYNAME   HCI_CMND_GETHOSTNAME
+#define  HCI_EVNT_MDNS_ADVERTISE   HCI_CMND_MDNS_ADVERTISE
+#define  HCI_EVNT_GETMSSVALUE		HCI_CMND_GETMSSVALUE	
+
+#define  HCI_EVNT_SEND          0x1003
+#define  HCI_EVNT_WRITE         0x100E
+#define  HCI_EVNT_SENDTO        0x100F
+
+#define HCI_EVNT_PATCHES_REQ    0x1000
+
+#define HCI_EVNT_UNSOL_BASE    0x4000
+
+#define HCI_EVNT_WLAN_UNSOL_BASE     (0x8000)
+
+#define HCI_EVNT_WLAN_UNSOL_CONNECT  	 (0x0001 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_UNSOL_DISCONNECT   (0x0002 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_UNSOL_INIT         (0x0004 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_TX_COMPLETE         (0x0008 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_UNSOL_DHCP         (0x0010 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_ASYNC_PING_REPORT  (0x0040 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE  (0x0080 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_KEEPALIVE			 (0x0200  + HCI_EVNT_WLAN_UNSOL_BASE)
+#define	HCI_EVNT_BSD_TCP_CLOSE_WAIT      (0x0800 + HCI_EVNT_WLAN_UNSOL_BASE)
+
+#define HCI_EVNT_DATA_UNSOL_FREE_BUFF \
+                                0x4100
+
+#define HCI_EVNT_NVMEM_CREATE_ENTRY \
+                                HCI_CMND_NVMEM_CREATE_ENTRY
+#define HCI_EVNT_NVMEM_SWAP_ENTRY HCI_CMND_NVMEM_SWAP_ENTRY
+
+#define HCI_EVNT_NVMEM_READ     HCI_CMND_NVMEM_READ
+#define HCI_EVNT_NVMEM_WRITE    (0x0202)
+
+#define HCI_EVNT_READ_SP_VERSION  	\
+				HCI_CMND_READ_SP_VERSION
+
+#define  HCI_EVNT_INPROGRESS    0xFFFF
+
+
+#define HCI_DATA_RECVFROM       0x84
+#define HCI_DATA_RECV           0x85
+#define HCI_DATA_NVMEM          0x91
+
+#define HCI_EVENT_CC3000_CAN_SHUT_DOWN 0x99
+
+//*****************************************************************************
+//
+// Prototypes for the structures for APIs.
+//
+//*****************************************************************************
+
+#define HCI_DATA_HEADER_SIZE		(5)
+#define HCI_EVENT_HEADER_SIZE		(5)
+#define HCI_DATA_CMD_HEADER_SIZE	(5)
+#define HCI_PATCH_HEADER_SIZE		(6)
+
+#define HCI_PACKET_TYPE_OFFSET		(0)
+#define HCI_PACKET_ARGSIZE_OFFSET	(2)
+#define HCI_PACKET_LENGTH_OFFSET	(3)
+
+
+#define HCI_EVENT_OPCODE_OFFSET (1)
+#define HCI_EVENT_LENGTH_OFFSET	(3)
+#define HCI_EVENT_STATUS_OFFSET	(4)
+#define HCI_DATA_LENGTH_OFFSET	(3)
+  
+  
+
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+//!  hci_command_send
+//!
+//!  @param  usOpcode     command operation code
+//!  @param  pucBuff      pointer to the command's arguments buffer
+//!  @param  ucArgsLength length of the arguments
+//!
+//!  @return              none
+//!
+//!  @brief               Initiate an HCI command.
+//
+//*****************************************************************************
+extern UINT16 hci_command_send(UINT16 usOpcode, 
+                                   UINT8 *ucArgs,
+                                   UINT8 ucArgsLength);
+ 
+
+//*****************************************************************************
+//
+//!  hci_data_send
+//!
+//!  @param  usOpcode        command operation code
+//!	 @param  ucArgs					 pointer to the command's arguments buffer
+//!  @param  usArgsLength    length of the arguments
+//!  @param  ucTail          pointer to the data buffer
+//!  @param  usTailLength    buffer length
+//!
+//!  @return none
+//!
+//!  @brief              Initiate an HCI data write operation
+//
+//*****************************************************************************
+extern INT32 hci_data_send(UINT8 ucOpcode,
+                                      UINT8 *ucArgs,
+                                      UINT16 usArgsLength,
+                                      UINT16 usDataLength,
+                                      const UINT8 *ucTail,
+                                      UINT16 usTailLength);
+
+
+//*****************************************************************************
+//
+//!  hci_data_command_send
+//!
+//!  @param  usOpcode      command operation code
+//!  @param  pucBuff       pointer to the data buffer
+//!  @param  ucArgsLength  arguments length
+//!  @param  ucDataLength  data length
+//!
+//!  @return none
+//!
+//!  @brief              Prepare HCI header and initiate an HCI data write operation
+//
+//*****************************************************************************
+extern void hci_data_command_send(UINT16 usOpcode, UINT8 *pucBuff,
+                     UINT8 ucArgsLength, UINT16 ucDataLength);
+
+//*****************************************************************************
+//
+//!  hci_patch_send
+//!
+//!  @param  usOpcode      command operation code
+//!  @param  pucBuff       pointer to the command's arguments buffer
+//!  @param  patch         pointer to patch content buffer 
+//!  @param  usDataLength  data length
+//!
+//!  @return              none
+//!
+//!  @brief               Prepare HCI header and initiate an HCI patch write operation
+//
+//*****************************************************************************
+extern void hci_patch_send(UINT8 ucOpcode, UINT8 *pucBuff, CHAR *patch, UINT16 usDataLength);
+
+
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+}
+#endif // __cplusplus
+
+#endif // __HCI_H__
diff --git a/drivers/cc3000/inc/host_driver_version.h b/drivers/cc3000/inc/host_driver_version.h
new file mode 100644
index 0000000000..9f2132e891
--- /dev/null
+++ b/drivers/cc3000/inc/host_driver_version.h
@@ -0,0 +1,55 @@
+/*****************************************************************************
+*
+*  host_driver_version.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __HOST_DRIVER_VERSION_H__
+#define __HOST_DRIVER_VERSION_H__
+
+#define DRIVER_VERSION_NUMBER   15
+
+
+
+#endif // __VERSION_H__
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/drivers/cc3000/inc/inet_ntop.h b/drivers/cc3000/inc/inet_ntop.h
new file mode 100644
index 0000000000..fa70806206
--- /dev/null
+++ b/drivers/cc3000/inc/inet_ntop.h
@@ -0,0 +1,4 @@
+#ifndef __INET_NTOP_H
+#define __INET_NTOP_H
+char *inet_ntop(int af, const void *addr, char *buf, size_t size);
+#endif /* __INET_NTOP_H */
diff --git a/drivers/cc3000/inc/inet_pton.h b/drivers/cc3000/inc/inet_pton.h
new file mode 100644
index 0000000000..0896d5d29f
--- /dev/null
+++ b/drivers/cc3000/inc/inet_pton.h
@@ -0,0 +1,4 @@
+#ifndef __INET_PTON_H
+#define __INET_PTON_H
+int inet_pton(int, const char *, void *);
+#endif /* __INET_PTON_H */
diff --git a/drivers/cc3000/inc/netapp.h b/drivers/cc3000/inc/netapp.h
new file mode 100644
index 0000000000..d5aa09a4a3
--- /dev/null
+++ b/drivers/cc3000/inc/netapp.h
@@ -0,0 +1,343 @@
+/*****************************************************************************
+*
+*  netapp.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __NETAPP_H__
+#define	__NETAPP_H__
+
+#include "data_types.h"
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+//*****************************************************************************
+//
+//! \addtogroup netapp_api
+//! @{
+//
+//*****************************************************************************
+
+typedef struct _netapp_dhcp_ret_args_t
+{
+    UINT8 aucIP[4];
+	UINT8 aucSubnetMask[4];
+	UINT8 aucDefaultGateway[4];
+	UINT8 aucDHCPServer[4];
+	UINT8 aucDNSServer[4];
+}tNetappDhcpParams;
+
+typedef struct _netapp_ipconfig_ret_args_t
+{
+    UINT8 aucIP[4];
+	UINT8 aucSubnetMask[4];
+	UINT8 aucDefaultGateway[4];
+	UINT8 aucDHCPServer[4];
+	UINT8 aucDNSServer[4];
+	UINT8 uaMacAddr[6];
+	UINT8 uaSSID[32];
+}tNetappIpconfigRetArgs;
+
+
+/*Ping send report parameters*/
+typedef struct _netapp_pingreport_args
+{
+	UINT32 packets_sent;
+	UINT32 packets_received;
+	UINT32 min_round_time;
+	UINT32 max_round_time;
+	UINT32 avg_round_time;
+} netapp_pingreport_args_t;
+
+
+//*****************************************************************************
+//
+//!  netapp_config_mac_adrress
+//!
+//!  @param  mac   device mac address, 6 bytes. Saved: yes 
+//!
+//!  @return       return on success 0, otherwise error.
+//!
+//!  @brief        Configure device MAC address and store it in NVMEM. 
+//!                The value of the MAC address configured through the API will
+//!		             be stored in CC3000 non volatile memory, thus preserved 
+//!                over resets.
+//
+//*****************************************************************************
+extern INT32  netapp_config_mac_adrress( UINT8 *mac );
+
+//*****************************************************************************
+//
+//!  netapp_dhcp
+//!
+//!  @param  aucIP               device mac address, 6 bytes. Saved: yes 
+//!  @param  aucSubnetMask       device mac address, 6 bytes. Saved: yes 
+//!  @param  aucDefaultGateway   device mac address, 6 bytes. Saved: yes 
+//!  @param  aucDNSServer        device mac address, 6 bytes. Saved: yes 
+//!
+//!  @return       return on success 0, otherwise error.
+//!
+//!  @brief       netapp_dhcp is used to configure the network interface, 
+//!               static or dynamic (DHCP).\n In order to activate DHCP mode, 
+//!               aucIP, aucSubnetMask, aucDefaultGateway must be 0.
+//!               The default mode of CC3000 is DHCP mode.
+//!               Note that the configuration is saved in non volatile memory
+//!               and thus preserved over resets.
+//!	 
+//! @note         If the mode is altered a reset of CC3000 device is required 
+//!               in order to apply changes.\nAlso note that asynchronous event 
+//!               of DHCP_EVENT, which is generated when an IP address is 
+//!               allocated either by the DHCP server or due to static 
+//!               allocation is generated only upon a connection to the 
+//!               AP was established. 
+//!
+//*****************************************************************************
+extern 	INT32 netapp_dhcp(UINT32 *aucIP, UINT32 *aucSubnetMask,UINT32 *aucDefaultGateway, UINT32 *aucDNSServer);
+
+
+
+//*****************************************************************************
+//
+//!  netapp_timeout_values
+//!
+//!  @param  aucDHCP    DHCP lease time request, also impact 
+//!                     the DHCP renew timeout. Range: [0-0xffffffff] seconds,
+//!                     0 or 0xffffffff == infinity lease timeout.
+//!                     Resolution:10 seconds. Influence: only after 
+//!                     reconnecting to the AP. 
+//!                     Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 seconds.
+//!                     The parameter is saved into the CC3000 NVMEM. 
+//!                     The default value on CC3000 is 14400 seconds.
+//!	 
+//!  @param  aucARP     ARP refresh timeout, if ARP entry is not updated by
+//!                     incoming packet, the ARP entry will be  deleted by
+//!                     the end of the timeout. 
+//!                     Range: [0-0xffffffff] seconds, 0 == infinity ARP timeout
+//!                     Resolution: 10 seconds. Influence: on runtime.
+//!                     Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 seconds
+//!                     The parameter is saved into the CC3000 NVMEM. 
+//!	                    The default value on CC3000 is 3600 seconds.
+//!
+//!  @param  aucKeepalive   Keepalive event sent by the end of keepalive timeout
+//!                         Range: [0-0xffffffff] seconds, 0 == infinity timeout
+//!                         Resolution: 10 seconds.
+//!                         Influence: on runtime.
+//!                         Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 sec
+//!                         The parameter is saved into the CC3000 NVMEM. 
+//!                         The default value on CC3000 is 10 seconds.
+//!
+//!  @param  aucInactivity   Socket inactivity timeout, socket timeout is
+//!                          refreshed by incoming or outgoing packet, by the
+//!                          end of the socket timeout the socket will be closed
+//!                          Range: [0-0xffffffff] sec, 0 == infinity timeout.
+//!                          Resolution: 10 seconds. Influence: on runtime.
+//!                          Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 sec
+//!                          The parameter is saved into the CC3000 NVMEM. 
+//!	                         The default value on CC3000 is 60 seconds.
+//!
+//!  @return       return on success 0, otherwise error.
+//!
+//!  @brief       Set new timeout values. Function set new timeout values for: 
+//!               DHCP lease timeout, ARP  refresh timeout, keepalive event 
+//!               timeout and socket inactivity timeout 
+//!	 
+//! @note         If a parameter set to non zero value which is less than 10s,
+//!               it will be set automatically to 10s.
+//!
+//*****************************************************************************
+#ifndef CC3000_TINY_DRIVER
+extern INT32 netapp_timeout_values(UINT32 *aucDHCP, UINT32 *aucARP, UINT32 *aucKeepalive, UINT32 *aucInactivity);
+#endif
+
+//*****************************************************************************
+//
+//!  netapp_ping_send
+//!
+//!  @param  ip              destination IP address
+//!  @param  pingAttempts    number of echo requests to send
+//!  @param  pingSize        send buffer size which may be up to 1400 bytes 
+//!  @param  pingTimeout     Time to wait for a response,in milliseconds.
+//!
+//!  @return       return on success 0, otherwise error.
+//!
+//!  @brief       send ICMP ECHO_REQUEST to network hosts 
+//!	 
+//! @note         If an operation finished successfully asynchronous ping report 
+//!               event will be generated. The report structure is as defined
+//!               by structure netapp_pingreport_args_t.
+//!
+//! @warning      Calling this function while a previous Ping Requests are in 
+//!               progress will stop the previous ping request.
+//*****************************************************************************
+
+ #ifndef CC3000_TINY_DRIVER
+extern INT32 netapp_ping_send(UINT32 *ip, UINT32 ulPingAttempts, UINT32 ulPingSize, UINT32 ulPingTimeout);
+#endif
+
+//*****************************************************************************
+//
+//!  netapp_ping_stop
+//!
+//!  @param  none
+//!
+//!  @return  On success, zero is returned. On error, -1 is returned.      
+//!
+//!  @brief   Stop any ping request.
+//!	 
+//!
+//*****************************************************************************
+
+#ifndef CC3000_TINY_DRIVER
+extern INT32 netapp_ping_stop();
+#endif
+//*****************************************************************************
+//
+//!  netapp_ping_report
+//!
+//!  @param  none
+//!
+//!  @return  none
+//!
+//!  @brief   Request for ping status. This API triggers the CC3000 to send 
+//!           asynchronous events: HCI_EVNT_WLAN_ASYNC_PING_REPORT.
+//!           This event will carry  the report structure:
+//!           netapp_pingreport_args_t. This structure is filled in with ping
+//!           results up till point of triggering API.
+//!           netapp_pingreport_args_t:\n packets_sent - echo sent,
+//!           packets_received - echo reply, min_round_time - minimum
+//!           round time, max_round_time - max round time,
+//!           avg_round_time - average round time
+//!	 
+//! @note     When a ping operation is not active, the returned structure 
+//!           fields are 0.
+//!
+//*****************************************************************************
+#ifndef CC3000_TINY_DRIVER
+extern void netapp_ping_report();
+#endif
+
+
+//*****************************************************************************
+//
+//!  netapp_ipconfig
+//!
+//!  @param[out]  ipconfig  This argument is a pointer to a 
+//!                         tNetappIpconfigRetArgs structure. This structure is
+//!                         filled in with the network interface configuration.
+//!                         tNetappIpconfigRetArgs:\n aucIP - ip address,
+//!                         aucSubnetMask - mask, aucDefaultGateway - default
+//!                         gateway address, aucDHCPServer - dhcp server address
+//!                         aucDNSServer - dns server address, uaMacAddr - mac
+//!                         address, uaSSID - connected AP ssid
+//!
+//!  @return  none
+//!
+//!  @brief   Obtain the CC3000 Network interface information.
+//!           Note that the information is available only after the WLAN
+//!       	  connection was established. Calling this function before
+//!           associated, will cause non-defined values to be returned.
+//!	 
+//! @note     The function is useful for figuring out the IP Configuration of
+//!       		the device when DHCP is used and for figuring out the SSID of
+//!       		the Wireless network the device is associated with.
+//!
+//*****************************************************************************
+
+extern void netapp_ipconfig( tNetappIpconfigRetArgs * ipconfig );
+
+
+//*****************************************************************************
+//
+//!  netapp_arp_flush
+//!
+//!  @param  none
+//!
+//!  @return  none
+//!
+//!  @brief  Flushes ARP table
+//!
+//*****************************************************************************
+
+#ifndef CC3000_TINY_DRIVER
+extern INT32 netapp_arp_flush();
+#endif
+
+
+//*****************************************************************************
+//
+//!  netapp_set_debug_level
+//!
+//!  @param[in]      level    debug level. Bitwise [0-8],
+//!                         0(disable)or 1(enable).\n Bitwise map: 0 - Critical
+//!                         message, 1 information message, 2 - core messages, 3 -
+//!                         HCI messages, 4 - Network stack messages, 5 - wlan
+//!                         messages, 6 - wlan driver messages, 7 - epprom messages,
+//!                         8 - general messages. Default: 0x13f. Saved: no
+//!
+//!  @return  On success, zero is returned. On error, -1 is returned
+//!
+//!  @brief   Debug messages sent via the UART debug channel, this function
+//!              enable/disable the debug level
+//!
+//*****************************************************************************
+
+
+#ifndef CC3000_TINY_DRIVER
+INT32 netapp_set_debug_level(UINT32 ulLevel);
+#endif
+//*****************************************************************************
+//
+// Close the Doxygen group.
+//! @}
+//
+//*****************************************************************************
+
+
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef	__cplusplus
+}
+#endif // __cplusplus
+
+#endif	// __NETAPP_H__
+
diff --git a/drivers/cc3000/inc/nvmem.h b/drivers/cc3000/inc/nvmem.h
new file mode 100644
index 0000000000..1bd1b610bc
--- /dev/null
+++ b/drivers/cc3000/inc/nvmem.h
@@ -0,0 +1,248 @@
+/*****************************************************************************
+*
+*  nvmem.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __NVRAM_H__
+#define __NVRAM_H__
+
+#include "cc3000_common.h"
+
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+
+//*****************************************************************************
+//
+//! \addtogroup nvmem_api
+//! @{
+//
+//*****************************************************************************
+
+/****************************************************************************
+**
+**	Definitions for File IDs
+**	
+****************************************************************************/
+/* NVMEM file ID - system files*/
+#define NVMEM_NVS_FILEID 							(0)
+#define NVMEM_NVS_SHADOW_FILEID 					(1)
+#define NVMEM_WLAN_CONFIG_FILEID 					(2)
+#define NVMEM_WLAN_CONFIG_SHADOW_FILEID 			(3)
+#define NVMEM_WLAN_DRIVER_SP_FILEID					(4)
+#define NVMEM_WLAN_FW_SP_FILEID						(5)
+#define NVMEM_MAC_FILEID 							(6)
+#define NVMEM_FRONTEND_VARS_FILEID 					(7)
+#define NVMEM_IP_CONFIG_FILEID 						(8)
+#define NVMEM_IP_CONFIG_SHADOW_FILEID 				(9)
+#define NVMEM_BOOTLOADER_SP_FILEID 					(10)
+#define NVMEM_RM_FILEID			 					(11)
+
+/* NVMEM file ID - user files*/
+#define NVMEM_AES128_KEY_FILEID	 					(12)
+#define NVMEM_SHARED_MEM_FILEID	 					(13)
+
+/*  max entry in order to invalid nvmem              */
+#define NVMEM_MAX_ENTRY                              (16)
+
+
+//*****************************************************************************
+//
+//!  nvmem_read
+//!
+//!  @param  ulFileId   nvmem file id:\n
+//!                     NVMEM_NVS_FILEID, NVMEM_NVS_SHADOW_FILEID,
+//!                     NVMEM_WLAN_CONFIG_FILEID, NVMEM_WLAN_CONFIG_SHADOW_FILEID,
+//!                     NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
+//!                     NVMEM_MAC_FILEID, NVMEM_FRONTEND_VARS_FILEID,
+//!                     NVMEM_IP_CONFIG_FILEID, NVMEM_IP_CONFIG_SHADOW_FILEID,
+//!                     NVMEM_BOOTLOADER_SP_FILEID, NVMEM_RM_FILEID,
+//!                     and user files 12-15.
+//!  @param  ulLength    number of bytes to read 
+//!  @param  ulOffset    ulOffset in file from where to read  
+//!  @param  buff        output buffer pointer
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief       Reads data from the file referred by the ulFileId parameter. 
+//!               Reads data from file ulOffset till length. Err if the file can't
+//!               be used, is invalid, or if the read is out of bounds. 
+//!	 
+//*****************************************************************************
+
+extern INT32 nvmem_read(UINT32 file_id, UINT32 length, UINT32 offset, UINT8 *buff);
+
+//*****************************************************************************
+//
+//!  nvmem_write
+//!
+//!  @param  ulFileId nvmem file id:\n
+//!                   NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
+//!                   NVMEM_MAC_FILEID, NVMEM_BOOTLOADER_SP_FILEID,
+//!                   and user files 12-15.
+//!  @param  ulLength       number of bytes to write  
+//!  @param  ulEntryOffset  offset in file to start write operation from 
+//!  @param  buff           data to write
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief       Write data to nvmem.
+//!               writes data to file referred by the ulFileId parameter. 
+//!               Writes data to file ulOffset till ulLength.The file id will be 
+//!               marked invalid till the write is done. The file entry doesn't
+//!               need to be valid - only allocated.
+//!	 
+//*****************************************************************************
+
+extern INT32 nvmem_write(UINT32 ulFileId, UINT32 ulLength, UINT32 ulEntryOffset, UINT8 *buff);
+
+
+//*****************************************************************************
+//
+//!  nvmem_set_mac_address
+//!
+//!  @param  mac   mac address to be set
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief       Write MAC address to EEPROM. 
+//!               mac address as appears over the air (OUI first)
+//!	 
+//*****************************************************************************
+extern UINT8 nvmem_set_mac_address(UINT8 *mac);
+
+
+//*****************************************************************************
+//
+//!  nvmem_get_mac_address
+//!
+//!  @param[out]  mac   mac address  
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief       Read MAC address from EEPROM. 
+//!               mac address as appears over the air (OUI first)
+//!	 
+//*****************************************************************************
+extern UINT8 nvmem_get_mac_address(UINT8 *mac);
+
+
+//*****************************************************************************
+//
+//!  nvmem_write_patch
+//!
+//!  @param  ulFileId   nvmem file id:\n
+//!                     NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
+//!  @param  spLength   number of bytes to write 
+//!  @param  spData     SP data to write
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief      program a patch to a specific file ID. 
+//!              The SP data is assumed to be organized in 2-dimensional.
+//!              Each line is SP_PORTION_SIZE bytes long. Actual programming is 
+//!              applied in SP_PORTION_SIZE bytes portions.
+//!	 
+//*****************************************************************************
+extern UINT8 nvmem_write_patch(UINT32 ulFileId, UINT32 spLength, const UINT8 *spData);
+
+
+//*****************************************************************************
+//
+//!  nvmem_read_sp_version
+//!
+//!  @param[out]  patchVer    first number indicates package ID and the second 
+//!                           number indicates package build number   
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief      Read patch version. read package version (WiFi FW patch, 
+//!              driver-supplicant-NS patch, bootloader patch)
+//!	 
+//*****************************************************************************
+#ifndef CC3000_TINY_DRIVER 
+extern UINT8 nvmem_read_sp_version(UINT8* patchVer);
+#endif
+
+//*****************************************************************************
+//
+//!  nvmem_create_entry
+//!
+//!  @param       ulFileId    nvmem file Id:\n
+//!                           * NVMEM_AES128_KEY_FILEID: 12
+//!                           * NVMEM_SHARED_MEM_FILEID: 13
+//!                           * and fileIDs 14 and 15
+//!  @param       ulNewLen    entry ulLength  
+//!
+//!  @return       on success 0, error otherwise.
+//!
+//!  @brief      Create new file entry and allocate space on the NVMEM. 
+//!              Applies only to user files.
+//!              Modify the size of file.
+//!              If the entry is unallocated - allocate it to size 
+//!              ulNewLen (marked invalid).
+//!              If it is allocated then deallocate it first.
+//!              To just mark the file as invalid without resizing - 
+//!              set ulNewLen=0.
+//!	 
+//*****************************************************************************
+extern INT32 nvmem_create_entry(UINT32 file_id, UINT32 newlen);
+
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+
+
+//*****************************************************************************
+//
+// Close the Doxygen group.
+//! @}
+//
+//*****************************************************************************
+
+
+#ifdef  __cplusplus
+}
+#endif // __cplusplus
+
+#endif // __NVRAM_H__
diff --git a/drivers/cc3000/inc/patch_prog.h b/drivers/cc3000/inc/patch_prog.h
new file mode 100644
index 0000000000..2dd0985446
--- /dev/null
+++ b/drivers/cc3000/inc/patch_prog.h
@@ -0,0 +1,11 @@
+#ifndef __PATCH_PROG_H__
+#define __PATCH_PROG_H__
+extern unsigned short fw_length;
+extern const unsigned char fw_patch[];
+
+extern unsigned short drv_length;
+extern const unsigned char wlan_drv_patch[];
+extern const unsigned char cRMdefaultParams[128];
+
+void patch_prog_start();
+#endif //__PATCH_PROG_H__
diff --git a/drivers/cc3000/inc/security.h b/drivers/cc3000/inc/security.h
new file mode 100644
index 0000000000..9a52b43735
--- /dev/null
+++ b/drivers/cc3000/inc/security.h
@@ -0,0 +1,130 @@
+/*****************************************************************************
+*
+*  security.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __SECURITY__
+#define __SECURITY__
+
+#include "nvmem.h"
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+
+#define AES128_KEY_SIZE		16
+
+#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
+
+
+//*****************************************************************************
+//
+//!  aes_encrypt
+//!
+//!  @param[in]  key   AES128 key of size 16 bytes
+//!  @param[in\out] state   16 bytes of plain text and cipher text
+//!
+//!  @return  none
+//!
+//!  @brief   AES128 encryption:
+//!           Given AES128 key and  16 bytes plain text, cipher text of 16 bytes
+//!           is computed. The AES implementation is in mode ECB (Electronic 
+//!           Code Book). 
+//!	 
+//!
+//*****************************************************************************
+extern void aes_encrypt(UINT8 *state, UINT8 *key);
+
+//*****************************************************************************
+//
+//!  aes_decrypt
+//!
+//!  @param[in]  key   AES128 key of size 16 bytes
+//!  @param[in\out] state   16 bytes of cipher text and plain text
+//!
+//!  @return  none
+//!
+//!  @brief   AES128 decryption:
+//!           Given AES128 key and  16 bytes cipher text, plain text of 16 bytes
+//!           is computed The AES implementation is in mode ECB 
+//!           (Electronic Code Book).
+//!	 
+//!
+//*****************************************************************************
+extern void aes_decrypt(UINT8 *state, UINT8 *key);
+
+
+//*****************************************************************************
+//
+//!  aes_read_key
+//!
+//!  @param[out]  key   AES128 key of size 16 bytes
+//!
+//!  @return  on success 0, error otherwise.
+//!
+//!  @brief   Reads AES128 key from EEPROM
+//!           Reads the AES128 key from fileID #12 in EEPROM
+//!           returns an error if the key does not exist. 
+//!	 
+//!
+//*****************************************************************************
+extern INT32 aes_read_key(UINT8 *key);
+
+//*****************************************************************************
+//
+//!  aes_write_key
+//!
+//!  @param[out]  key   AES128 key of size 16 bytes
+//!
+//!  @return  on success 0, error otherwise.
+//!
+//!  @brief   writes AES128 key from EEPROM
+//!           Writes the AES128 key to fileID #12 in EEPROM
+//!	 
+//!
+//*****************************************************************************
+extern INT32 aes_write_key(UINT8 *key);
+
+#endif //CC3000_UNENCRYPTED_SMART_CONFIG
+
+#ifdef  __cplusplus
+}
+#endif // __cplusplus
+
+#endif
diff --git a/drivers/cc3000/inc/socket.h b/drivers/cc3000/inc/socket.h
new file mode 100644
index 0000000000..209ce5d53e
--- /dev/null
+++ b/drivers/cc3000/inc/socket.h
@@ -0,0 +1,675 @@
+/*****************************************************************************
+*
+*  socket.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __SOCKET_H__
+#define __SOCKET_H__
+
+
+//*****************************************************************************
+//
+//! \addtogroup socket_api
+//! @{
+//
+//*****************************************************************************
+
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+#define HOSTNAME_MAX_LENGTH (230)  // 230 bytes + header shouldn't exceed 8 bit value
+
+//--------- Address Families --------
+
+#define  AF_INET                2
+#define  AF_INET6               23
+
+//------------ Socket Types ------------
+
+#define  SOCK_STREAM            1
+#define  SOCK_DGRAM             2
+#define  SOCK_RAW               3           // Raw sockets allow new IPv4 protocols to be implemented in user space. A raw socket receives or sends the raw datagram not including link level headers
+#define  SOCK_RDM               4
+#define  SOCK_SEQPACKET         5
+
+//----------- Socket Protocol ----------
+
+#define IPPROTO_IP              0           // dummy for IP
+#define IPPROTO_ICMP            1           // control message protocol
+#define IPPROTO_IPV4            IPPROTO_IP  // IP inside IP
+#define IPPROTO_TCP             6           // tcp
+#define IPPROTO_UDP             17          // user datagram protocol
+#define IPPROTO_IPV6            41          // IPv6 in IPv6
+#define IPPROTO_NONE            59          // No next header
+#define IPPROTO_RAW             255         // raw IP packet
+#define IPPROTO_MAX             256
+
+//----------- Socket retunr codes  -----------
+
+#define SOC_ERROR				(-1)		// error 
+#define SOC_IN_PROGRESS			(-2)		// socket in progress
+
+//----------- Socket Options -----------
+#define  SOL_SOCKET             0xffff		//  socket level
+#define  SOCKOPT_RECV_NONBLOCK         	0	// recv non block mode, set SOCK_ON or SOCK_OFF (default block mode)
+#define  SOCKOPT_RECV_TIMEOUT			1	// optname to configure recv and recvfromtimeout
+#define  SOCKOPT_ACCEPT_NONBLOCK		2	// accept non block mode, set SOCK_ON or SOCK_OFF (default block mode)
+#define  SOCK_ON                0			// socket non-blocking mode	is enabled		
+#define  SOCK_OFF               1			// socket blocking mode is enabled
+
+#define  MAX_PACKET_SIZE        1500
+#define  MAX_LISTEN_QUEUE       4
+
+#define  IOCTL_SOCKET_EVENTMASK
+
+#define ENOBUFS                 55          // No buffer space available
+
+#define __FD_SETSIZE            32
+
+#define  ASIC_ADDR_LEN          8
+	
+#define NO_QUERY_RECIVED        -3
+	
+	
+typedef struct _in_addr_t
+{
+    UINT32 s_addr;                   // load with inet_aton()
+} in_addr;
+
+typedef struct _sockaddr_t
+{
+    UINT16   sa_family;
+    UINT8     sa_data[14];
+} sockaddr;
+
+typedef struct _sockaddr_in_t
+{
+    INT16            sin_family;            // e.g. AF_INET
+    UINT16   sin_port;              // e.g. htons(3490)
+    in_addr          sin_addr;              // see struct in_addr, below
+    CHAR             sin_zero[8];           // zero this if you want to
+} sockaddr_in;
+
+typedef UINT32 socklen_t;
+
+// The fd_set member is required to be an array of INT32s.
+typedef INT32 __fd_mask;
+
+// It's easier to assume 8-bit bytes than to get CHAR_BIT.
+#define __NFDBITS               (8 * sizeof (__fd_mask))
+#define __FDELT(d)              ((d) / __NFDBITS)
+#define __FDMASK(d)             ((__fd_mask) 1 << ((d) % __NFDBITS))
+
+// fd_set for select and pselect.
+typedef struct
+{
+    __fd_mask fds_bits[__FD_SETSIZE / __NFDBITS];
+#define __FDS_BITS(set)        ((set)->fds_bits)
+} fd_set;
+
+// We don't use `memset' because this would require a prototype and
+//   the array isn't too big.
+#define __FD_ZERO(set)                               \
+  do {                                                \
+    UINT16 __i;                                 \
+    fd_set *__arr = (set);                            \
+    for (__i = 0; __i < sizeof (fd_set) / sizeof (__fd_mask); ++__i) \
+      __FDS_BITS (__arr)[__i] = 0;                    \
+  } while (0)
+#define __FD_SET(d, set)       (__FDS_BITS (set)[__FDELT (d)] |= __FDMASK (d))
+#define __FD_CLR(d, set)       (__FDS_BITS (set)[__FDELT (d)] &= ~__FDMASK (d))
+#define __FD_ISSET(d, set)     (__FDS_BITS (set)[__FDELT (d)] & __FDMASK (d))
+
+// Access macros for 'fd_set'.
+#define FD_SET(fd, fdsetp)      __FD_SET (fd, fdsetp)
+#define FD_CLR(fd, fdsetp)      __FD_CLR (fd, fdsetp)
+#define FD_ISSET(fd, fdsetp)    __FD_ISSET (fd, fdsetp)
+#define FD_ZERO(fdsetp)         __FD_ZERO (fdsetp)
+
+//Use in case of Big Endian only
+  
+#define htonl(A)    ((((UINT32)(A) & 0xff000000) >> 24) | \
+                     (((UINT32)(A) & 0x00ff0000) >> 8) | \
+                     (((UINT32)(A) & 0x0000ff00) << 8) | \
+                     (((UINT32)(A) & 0x000000ff) << 24))
+
+#define ntohl                   htonl
+
+//Use in case of Big Endian only
+#define htons(A)     ((((UINT32)(A) & 0xff00) >> 8) | \
+                      (((UINT32)(A) & 0x00ff) << 8))
+
+
+#define ntohs                   htons
+
+// mDNS port - 5353    mDNS multicast address - 224.0.0.251 
+#define SET_mDNS_ADD(sockaddr)     	   	sockaddr.sa_data[0] = 0x14; \
+																								sockaddr.sa_data[1] = 0xe9; \
+																								sockaddr.sa_data[2] = 0xe0; \
+																								sockaddr.sa_data[3] = 0x0; \
+																								sockaddr.sa_data[4] = 0x0; \
+																								sockaddr.sa_data[5] = 0xfb; 
+
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+//! socket
+//!
+//!  @param  domain    selects the protocol family which will be used for 
+//!                    communication. On this version only AF_INET is supported
+//!  @param  type      specifies the communication semantics. On this version 
+//!                    only SOCK_STREAM, SOCK_DGRAM, SOCK_RAW are supported
+//!  @param  protocol  specifies a particular protocol to be used with the 
+//!                    socket IPPROTO_TCP, IPPROTO_UDP or IPPROTO_RAW are 
+//!                    supported.
+//!
+//!  @return  On success, socket handle that is used for consequent socket 
+//!           operations. On error, -1 is returned.
+//!
+//!  @brief  create an endpoint for communication
+//!          The socket function creates a socket that is bound to a specific 
+//!          transport service provider. This function is called by the 
+//!          application layer to obtain a socket handle.
+//
+//*****************************************************************************
+extern INT16 socket(INT32 domain, INT32 type, INT32 protocol);
+
+//*****************************************************************************
+//
+//! closesocket
+//!
+//!  @param  sd    socket handle.
+//!
+//!  @return  On success, zero is returned. On error, -1 is returned.
+//!
+//!  @brief  The socket function closes a created socket.
+//
+//*****************************************************************************
+extern INT32 closesocket(INT32 sd);
+
+//*****************************************************************************
+//
+//! accept
+//!
+//!  @param[in]   sd      socket descriptor (handle)              
+//!  @param[out]  addr    the argument addr is a pointer to a sockaddr structure
+//!                       This structure is filled in with the address of the  
+//!                       peer socket, as known to the communications layer.        
+//!                       determined. The exact format of the address returned             
+//!                       addr is by the socket's address sockaddr. 
+//!                       On this version only AF_INET is supported.
+//!                       This argument returns in network order.
+//!  @param[out] addrlen  the addrlen argument is a value-result argument: 
+//!                       it should initially contain the size of the structure
+//!                       pointed to by addr.
+//!
+//!  @return  For socket in blocking mode:
+//!				      On success, socket handle. on failure negative
+//!			      For socket in non-blocking mode:
+//!				     - On connection establishment, socket handle
+//!				     - On connection pending, SOC_IN_PROGRESS (-2)
+//!			       - On failure, SOC_ERROR	(-1)
+//!
+//!  @brief  accept a connection on a socket:
+//!          This function is used with connection-based socket types 
+//!          (SOCK_STREAM). It extracts the first connection request on the 
+//!          queue of pending connections, creates a new connected socket, and
+//!          returns a new file descriptor referring to that socket.
+//!          The newly created socket is not in the listening state. 
+//!          The original socket sd is unaffected by this call. 
+//!          The argument sd is a socket that has been created with socket(),
+//!          bound to a local address with bind(), and is  listening for 
+//!          connections after a listen(). The argument addr is a pointer 
+//!          to a sockaddr structure. This structure is filled in with the 
+//!          address of the peer socket, as known to the communications layer.
+//!          The exact format of the address returned addr is determined by the 
+//!          socket's address family. The addrlen argument is a value-result
+//!          argument: it should initially contain the size of the structure
+//!          pointed to by addr, on return it will contain the actual 
+//!          length (in bytes) of the address returned.
+//!
+//! @sa     socket ; bind ; listen
+//
+//*****************************************************************************
+extern INT32 accept(INT32 sd, sockaddr *addr, socklen_t *addrlen);
+
+//*****************************************************************************
+//
+//! bind
+//!
+//!  @param[in]   sd      socket descriptor (handle)              
+//!  @param[out]  addr    specifies the destination address. On this version 
+//!                       only AF_INET is supported.
+//!  @param[out] addrlen  contains the size of the structure pointed to by addr.
+//!
+//!  @return  	On success, zero is returned. On error, -1 is returned.
+//!
+//!  @brief  assign a name to a socket
+//!          This function gives the socket the local address addr.
+//!          addr is addrlen bytes long. Traditionally, this is called when a 
+//!          socket is created with socket, it exists in a name space (address 
+//!          family) but has no name assigned.
+//!          It is necessary to assign a local address before a SOCK_STREAM
+//!          socket may receive connections.
+//!
+//! @sa     socket ; accept ; listen
+//
+//*****************************************************************************
+extern INT32 bind(INT32 sd, const sockaddr *addr, INT32 addrlen);
+
+//*****************************************************************************
+//
+//! listen
+//!
+//!  @param[in]   sd      socket descriptor (handle)              
+//!  @param[in]  backlog  specifies the listen queue depth. On this version
+//!                       backlog is not supported.
+//!  @return  	On success, zero is returned. On error, -1 is returned.
+//!
+//!  @brief  listen for connections on a socket
+//!          The willingness to accept incoming connections and a queue
+//!          limit for incoming connections are specified with listen(),
+//!          and then the connections are accepted with accept.
+//!          The listen() call applies only to sockets of type SOCK_STREAM
+//!          The backlog parameter defines the maximum length the queue of
+//!          pending connections may grow to. 
+//!
+//! @sa     socket ; accept ; bind
+//!
+//! @note   On this version, backlog is not supported
+//
+//*****************************************************************************
+extern INT32 listen(INT32 sd, INT32 backlog);
+
+//*****************************************************************************
+//
+//! gethostbyname
+//!
+//!  @param[in]   hostname     host name              
+//!  @param[in]   usNameLen    name length 
+//!  @param[out]  out_ip_addr  This parameter is filled in with host IP address. 
+//!                            In case that host name is not resolved, 
+//!                            out_ip_addr is zero.                  
+//!  @return  	On success, positive is returned. On error, negative is returned
+//!
+//!  @brief  Get host IP by name. Obtain the IP Address of machine on network, 
+//!          by its name.
+//!
+//!  @note  On this version, only blocking mode is supported. Also note that
+//!		     the function requires DNS server to be configured prior to its usage.
+//
+//*****************************************************************************
+#ifndef CC3000_TINY_DRIVER 
+extern INT16 gethostbyname(CHAR * hostname, UINT16 usNameLen, UINT32* out_ip_addr);
+#endif
+
+
+//*****************************************************************************
+//
+//! connect
+//!
+//!  @param[in]   sd       socket descriptor (handle)         
+//!  @param[in]   addr     specifies the destination addr. On this version
+//!                        only AF_INET is supported.
+//!  @param[out]  addrlen  contains the size of the structure pointed to by addr    
+//!  @return  	On success, zero is returned. On error, -1 is returned
+//!
+//!  @brief  initiate a connection on a socket 
+//!          Function connects the socket referred to by the socket descriptor 
+//!          sd, to the address specified by addr. The addrlen argument 
+//!          specifies the size of addr. The format of the address in addr is 
+//!          determined by the address space of the socket. If it is of type 
+//!          SOCK_DGRAM, this call specifies the peer with which the socket is 
+//!          to be associated; this address is that to which datagrams are to be
+//!          sent, and the only address from which datagrams are to be received.  
+//!          If the socket is of type SOCK_STREAM, this call attempts to make a 
+//!          connection to another socket. The other socket is specified  by 
+//!          address, which is an address in the communications space of the
+//!          socket. Note that the function implements only blocking behavior 
+//!          thus the caller will be waiting either for the connection 
+//!          establishment or for the connection establishment failure.
+//!
+//!  @sa socket
+//
+//*****************************************************************************
+extern INT32 connect(INT32 sd, const sockaddr *addr, INT32 addrlen);
+
+//*****************************************************************************
+//
+//! select
+//!
+//!  @param[in]   nfds       the highest-numbered file descriptor in any of the
+//!                           three sets, plus 1.     
+//!  @param[out]   writesds   socket descriptors list for write monitoring
+//!  @param[out]   readsds    socket descriptors list for read monitoring  
+//!  @param[out]   exceptsds  socket descriptors list for exception monitoring
+//!  @param[in]   timeout     is an upper bound on the amount of time elapsed
+//!                           before select() returns. Null means infinity 
+//!                           timeout. The minimum timeout is 5 milliseconds,
+//!                          less than 5 milliseconds will be set
+//!                           automatically to 5 milliseconds.
+//!  @return  	On success, select() returns the number of file descriptors
+//!             contained in the three returned descriptor sets (that is, the
+//!             total number of bits that are set in readfds, writefds,
+//!             exceptfds) which may be zero if the timeout expires before
+//!             anything interesting  happens.
+//!             On error, -1 is returned.
+//!                   *readsds - return the sockets on which Read request will
+//!                              return without delay with valid data.
+//!                   *writesds - return the sockets on which Write request 
+//!                                 will return without delay.
+//!                   *exceptsds - return the sockets which closed recently.
+//!
+//!  @brief  Monitor socket activity  
+//!          Select allow a program to monitor multiple file descriptors,
+//!          waiting until one or more of the file descriptors become 
+//!         "ready" for some class of I/O operation 
+//!
+//!  @Note   If the timeout value set to less than 5ms it will automatically set
+//!          to 5ms to prevent overload of the system
+//!
+//!  @sa socket
+//
+//*****************************************************************************
+extern INT16 select(INT32 nfds, fd_set *readsds, fd_set *writesds,
+                  fd_set *exceptsds, struct timeval *timeout);
+
+//*****************************************************************************
+//
+//! setsockopt
+//!
+//!  @param[in]   sd          socket handle
+//!  @param[in]   level       defines the protocol level for this option
+//!  @param[in]   optname     defines the option name to Interrogate
+//!  @param[in]   optval      specifies a value for the option
+//!  @param[in]   optlen      specifies the length of the option value
+//!  @return  	On success, zero is returned. On error, -1 is returned
+//!
+//!  @brief  set socket options
+//!          This function manipulate the options associated with a socket.
+//!          Options may exist at multiple protocol levels; they are always
+//!          present at the uppermost socket level.
+//!          When manipulating socket options the level at which the option 
+//!          resides and the name of the option must be specified.  
+//!          To manipulate options at the socket level, level is specified as 
+//!          SOL_SOCKET. To manipulate options at any other level the protocol 
+//!          number of the appropriate protocol controlling the option is 
+//!          supplied. For example, to indicate that an option is to be 
+//!          interpreted by the TCP protocol, level should be set to the 
+//!          protocol number of TCP; 
+//!          The parameters optval and optlen are used to access optval - 
+//!          use for setsockopt(). For getsockopt() they identify a buffer
+//!          in which the value for the requested option(s) are to 
+//!          be returned. For getsockopt(), optlen is a value-result 
+//!          parameter, initially containing the size of the buffer 
+//!          pointed to by option_value, and modified on return to 
+//!          indicate the actual size of the value returned. If no option 
+//!          value is to be supplied or returned, option_value may be NULL.
+//!
+//!  @Note   On this version the following two socket options are enabled:
+//!    			 The only protocol level supported in this version
+//!          is SOL_SOCKET (level).
+//!		       1. SOCKOPT_RECV_TIMEOUT (optname)
+//!			      SOCKOPT_RECV_TIMEOUT configures recv and recvfrom timeout 
+//!           in milliseconds.
+//!		        In that case optval should be pointer to UINT32.
+//!		       2. SOCKOPT_NONBLOCK (optname). sets the socket non-blocking mode on 
+//!           or off.
+//!		        In that case optval should be SOCK_ON or SOCK_OFF (optval).
+//!
+//!  @sa getsockopt
+//
+//*****************************************************************************
+#ifndef CC3000_TINY_DRIVER 
+extern INT16 setsockopt(INT32 sd, INT32 level, INT32 optname, const void *optval,
+                      socklen_t optlen);
+#endif
+//*****************************************************************************
+//
+//! getsockopt
+//!
+//!  @param[in]   sd          socket handle
+//!  @param[in]   level       defines the protocol level for this option
+//!  @param[in]   optname     defines the option name to Interrogate
+//!  @param[out]   optval      specifies a value for the option
+//!  @param[out]   optlen      specifies the length of the option value
+//!  @return  	On success, zero is returned. On error, -1 is returned
+//!
+//!  @brief  set socket options
+//!          This function manipulate the options associated with a socket.
+//!          Options may exist at multiple protocol levels; they are always
+//!          present at the uppermost socket level.
+//!          When manipulating socket options the level at which the option 
+//!          resides and the name of the option must be specified.  
+//!          To manipulate options at the socket level, level is specified as 
+//!          SOL_SOCKET. To manipulate options at any other level the protocol 
+//!          number of the appropriate protocol controlling the option is 
+//!          supplied. For example, to indicate that an option is to be 
+//!          interpreted by the TCP protocol, level should be set to the 
+//!          protocol number of TCP; 
+//!          The parameters optval and optlen are used to access optval - 
+//!          use for setsockopt(). For getsockopt() they identify a buffer
+//!          in which the value for the requested option(s) are to 
+//!          be returned. For getsockopt(), optlen is a value-result 
+//!          parameter, initially containing the size of the buffer 
+//!          pointed to by option_value, and modified on return to 
+//!          indicate the actual size of the value returned. If no option 
+//!          value is to be supplied or returned, option_value may be NULL.
+//!
+//!  @Note   On this version the following two socket options are enabled:
+//!    			 The only protocol level supported in this version
+//!          is SOL_SOCKET (level).
+//!		       1. SOCKOPT_RECV_TIMEOUT (optname)
+//!			      SOCKOPT_RECV_TIMEOUT configures recv and recvfrom timeout 
+//!           in milliseconds.
+//!		        In that case optval should be pointer to UINT32.
+//!		       2. SOCKOPT_NONBLOCK (optname). sets the socket non-blocking mode on 
+//!           or off.
+//!		        In that case optval should be SOCK_ON or SOCK_OFF (optval).
+//!
+//!  @sa setsockopt
+//
+//*****************************************************************************
+extern INT16 getsockopt(INT32 sd, INT32 level, INT32 optname, void *optval,
+                      socklen_t *optlen);
+
+//*****************************************************************************
+//
+//!  recv
+//!
+//!  @param[in]  sd     socket handle
+//!  @param[out] buf    Points to the buffer where the message should be stored
+//!  @param[in]  len    Specifies the length in bytes of the buffer pointed to 
+//!                     by the buffer argument.
+//!  @param[in] flags   Specifies the type of message reception. 
+//!                     On this version, this parameter is not supported.
+//!
+//!  @return         Return the number of bytes received, or -1 if an error
+//!                  occurred
+//!
+//!  @brief          function receives a message from a connection-mode socket
+//!
+//!  @sa recvfrom
+//!
+//!  @Note On this version, only blocking mode is supported.
+//
+//*****************************************************************************
+extern INT16 recv(INT32 sd, void *buf, INT32 len, INT32 flags);
+
+//*****************************************************************************
+//
+//!  recvfrom
+//!
+//!  @param[in]  sd     socket handle
+//!  @param[out] buf    Points to the buffer where the message should be stored
+//!  @param[in]  len    Specifies the length in bytes of the buffer pointed to 
+//!                     by the buffer argument.
+//!  @param[in] flags   Specifies the type of message reception. 
+//!                     On this version, this parameter is not supported.
+//!  @param[in] from   pointer to an address structure indicating the source
+//!                    address: sockaddr. On this version only AF_INET is
+//!                    supported.
+//!  @param[in] fromlen   source address structure size
+//!
+//!  @return         Return the number of bytes received, or -1 if an error
+//!                  occurred
+//!
+//!  @brief         read data from socket
+//!                 function receives a message from a connection-mode or
+//!                 connectionless-mode socket. Note that raw sockets are not
+//!                 supported.
+//!
+//!  @sa recv
+//!
+//!  @Note On this version, only blocking mode is supported.
+//
+//*****************************************************************************
+extern INT16 recvfrom(INT32 sd, void *buf, INT32 len, INT32 flags, sockaddr *from, 
+                    socklen_t *fromlen);
+
+//*****************************************************************************
+//
+//!  send
+//!
+//!  @param sd       socket handle
+//!  @param buf      Points to a buffer containing the message to be sent
+//!  @param len      message size in bytes
+//!  @param flags    On this version, this parameter is not supported
+//!
+//!  @return         Return the number of bytes transmitted, or -1 if an
+//!                  error occurred
+//!
+//!  @brief          Write data to TCP socket
+//!                  This function is used to transmit a message to another 
+//!                  socket.
+//!
+//!  @Note           On this version, only blocking mode is supported.
+//!
+//!  @sa             sendto
+//
+//*****************************************************************************
+
+extern INT16 send(INT32 sd, const void *buf, INT32 len, INT32 flags);
+
+//*****************************************************************************
+//
+//!  sendto
+//!
+//!  @param sd       socket handle
+//!  @param buf      Points to a buffer containing the message to be sent
+//!  @param len      message size in bytes
+//!  @param flags    On this version, this parameter is not supported
+//!  @param to       pointer to an address structure indicating the destination
+//!                  address: sockaddr. On this version only AF_INET is
+//!                  supported.
+//!  @param tolen    destination address structure size
+//!
+//!  @return         Return the number of bytes transmitted, or -1 if an
+//!                  error occurred
+//!
+//!  @brief          Write data to TCP socket
+//!                  This function is used to transmit a message to another 
+//!                  socket.
+//!
+//!  @Note           On this version, only blocking mode is supported.
+//!
+//!  @sa             send
+//
+//*****************************************************************************
+
+extern INT16 sendto(INT32 sd, const void *buf, INT32 len, INT32 flags, 
+                  const sockaddr *to, socklen_t tolen);
+
+//*****************************************************************************
+//
+//!  mdnsAdvertiser
+//!
+//!  @param[in] mdnsEnabled         flag to enable/disable the mDNS feature
+//!  @param[in] deviceServiceName   Service name as part of the published
+//!                                 canonical domain name
+//!  @param[in] deviceServiceNameLength   Length of the service name - up to 32 chars
+//!  
+//!
+//!  @return   On success, zero is returned, return SOC_ERROR if socket was not 
+//!            opened successfully, or if an error occurred.
+//!
+//!  @brief    Set CC3000 in mDNS advertiser mode in order to advertise itself.
+//
+//*****************************************************************************
+extern INT16 mdnsAdvertiser(UINT16 mdnsEnabled, CHAR * deviceServiceName, UINT16 deviceServiceNameLength);
+
+
+//*****************************************************************************
+//
+//!  getmssvalue
+//!
+//!  @param[in] sd         socket descriptor
+//!
+//!  @return   On success, returns the MSS value of a TCP connection
+//!
+//!  @brief    Returns the MSS value of a TCP connection according to the socket descriptor
+//
+//*****************************************************************************
+extern UINT16 getmssvalue (INT32 sd);
+
+//*****************************************************************************
+//
+// Close the Doxygen group.
+//! @}
+//
+//*****************************************************************************
+
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef  __cplusplus
+}
+#endif // __cplusplus
+
+#endif // __SOCKET_H__
diff --git a/drivers/cc3000/inc/wlan.h b/drivers/cc3000/inc/wlan.h
new file mode 100644
index 0000000000..3821612b2d
--- /dev/null
+++ b/drivers/cc3000/inc/wlan.h
@@ -0,0 +1,518 @@
+/*****************************************************************************
+*
+*  wlan.h  - CC3000 Host Driver Implementation.
+*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the   
+*    distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef __WLAN_H__
+#define	__WLAN_H__
+
+#include "cc3000_common.h"
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+#define      WLAN_SEC_UNSEC (0)
+#define      WLAN_SEC_WEP	(1)
+#define      WLAN_SEC_WPA	(2)
+#define      WLAN_SEC_WPA2	(3)
+//*****************************************************************************
+//
+//! \addtogroup wlan_api
+//! @{
+//
+//*****************************************************************************
+
+
+//*****************************************************************************
+//
+//!  wlan_init
+//!
+//!  @param  sWlanCB   Asynchronous events callback.  
+//!                    0 no event call back.
+//!                  -call back parameters:
+//!                   1) event_type: HCI_EVNT_WLAN_UNSOL_CONNECT connect event,
+//!                     HCI_EVNT_WLAN_UNSOL_DISCONNECT disconnect event,
+//!                     HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE config done,
+//!                     HCI_EVNT_WLAN_UNSOL_DHCP dhcp report, 
+//!                     HCI_EVNT_WLAN_ASYNC_PING_REPORT ping report OR 
+//!                     HCI_EVNT_WLAN_KEEPALIVE keepalive.
+//!                   2) data: pointer to extra data that received by the event
+//!                     (NULL no data).
+//!                   3) length: data length.
+//!                  -Events with extra data:
+//!                     HCI_EVNT_WLAN_UNSOL_DHCP: 4 bytes IP, 4 bytes Mask, 
+//!                     4 bytes default gateway, 4 bytes DHCP server and 4 bytes
+//!                     for DNS server.
+//!                     HCI_EVNT_WLAN_ASYNC_PING_REPORT: 4 bytes Packets sent, 
+//!                     4 bytes Packets received, 4 bytes Min round time, 
+//!                     4 bytes Max round time and 4 bytes for Avg round time.
+//!
+//!  @param    sFWPatches  0 no patch or pointer to FW patches 
+//!  @param    sDriverPatches  0 no patch or pointer to driver patches
+//!  @param    sBootLoaderPatches  0 no patch or pointer to bootloader patches
+//!  @param    sReadWlanInterruptPin    init callback. the callback read wlan 
+//!            interrupt status.
+//!  @param    sWlanInterruptEnable   init callback. the callback enable wlan 
+//!            interrupt.
+//!  @param    sWlanInterruptDisable   init callback. the callback disable wlan
+//!            interrupt.
+//!  @param    sWriteWlanPin      init callback. the callback write value 
+//!            to device pin.  
+//!
+//!  @return   none
+//!
+//!  @sa       wlan_set_event_mask , wlan_start , wlan_stop 
+//!
+//!  @brief    Initialize wlan driver
+//!
+//!  @warning This function must be called before ANY other wlan driver function
+//
+//*****************************************************************************
+extern void wlan_init(		tWlanCB	 	sWlanCB,
+	   			tFWPatches sFWPatches,
+	   			tDriverPatches sDriverPatches,
+	   			tBootLoaderPatches sBootLoaderPatches,
+                tWlanReadInteruptPin  sReadWlanInterruptPin,
+                tWlanInterruptEnable  sWlanInterruptEnable,
+                tWlanInterruptDisable sWlanInterruptDisable,
+                tWriteWlanPin         sWriteWlanPin);
+
+
+
+//*****************************************************************************
+//
+//!  wlan_start
+//!
+//!  @param   usPatchesAvailableAtHost -  flag to indicate if patches available
+//!                                    from host or from EEPROM. Due to the 
+//!                                    fact the patches are burn to the EEPROM
+//!                                    using the patch programmer utility, the 
+//!                                    patches will be available from the EEPROM
+//!                                    and not from the host.
+//!
+//!  @return        none
+//!
+//!  @brief        Start WLAN device. This function asserts the enable pin of 
+//!                the device (WLAN_EN), starting the HW initialization process.
+//!                The function blocked until device Initialization is completed.
+//!                Function also configure patches (FW, driver or bootloader) 
+//!                and calls appropriate device callbacks.
+//!
+//!  @Note          Prior calling the function wlan_init shall be called.
+//!  @Warning       This function must be called after wlan_init and before any 
+//!                 other wlan API
+//!  @sa            wlan_init , wlan_stop
+//!
+//
+//*****************************************************************************
+extern int wlan_start(UINT16 usPatchesAvailableAtHost);
+
+//*****************************************************************************
+//
+//!  wlan_stop
+//!
+//!  @param         none
+//!
+//!  @return        none
+//!
+//!  @brief         Stop WLAN device by putting it into reset state.
+//!
+//!  @sa            wlan_start
+//
+//*****************************************************************************
+extern void wlan_stop(void);
+
+//*****************************************************************************
+//
+//!  wlan_connect
+//!
+//!  @param    sec_type   security options:
+//!               WLAN_SEC_UNSEC, 
+//!               WLAN_SEC_WEP (ASCII support only),
+//!               WLAN_SEC_WPA or WLAN_SEC_WPA2
+//!  @param    ssid       up to 32 bytes and is ASCII SSID of the AP
+//!  @param    ssid_len   length of the SSID
+//!  @param    bssid      6 bytes specified the AP bssid
+//!  @param    key        up to 32 bytes specified the AP security key
+//!  @param    key_len    key length 
+//!
+//!  @return     On success, zero is returned. On error, negative is returned. 
+//!              Note that even though a zero is returned on success to trigger
+//!              connection operation, it does not mean that CCC3000 is already
+//!              connected. An asynchronous "Connected" event is generated when 
+//!              actual association process finishes and CC3000 is connected to
+//!              the AP. If DHCP is set, An asynchronous "DHCP" event is 
+//!              generated when DHCP process is finish.
+//!              
+//!
+//!  @brief      Connect to AP
+//!  @warning    Please Note that when connection to AP configured with security
+//!              type WEP, please confirm that the key is set as ASCII and not
+//!              as HEX.
+//!  @sa         wlan_disconnect
+//
+//*****************************************************************************
+#ifndef CC3000_TINY_DRIVER
+extern INT32 wlan_connect(UINT32 ulSecType, CHAR *ssid, INT32 ssid_len,
+                        UINT8 *bssid, UINT8 *key, INT32 key_len);
+#else
+extern INT32 wlan_connect(CHAR *ssid, INT32 ssid_len);
+
+#endif
+
+//*****************************************************************************
+//
+//!  wlan_disconnect
+//!
+//!  @return    0 disconnected done, other CC3000 already disconnected            
+//!
+//!  @brief      Disconnect connection from AP. 
+//!
+//!  @sa         wlan_connect
+//
+//*****************************************************************************
+
+extern INT32 wlan_disconnect(void);
+
+//*****************************************************************************
+//
+//!  wlan_add_profile
+//!
+//!  @param    ulSecType  WLAN_SEC_UNSEC,WLAN_SEC_WEP,WLAN_SEC_WPA,WLAN_SEC_WPA2
+//!  @param    ucSsid    ssid  SSID up to 32 bytes
+//!  @param    ulSsidLen ssid length
+//!  @param    ucBssid   bssid  6 bytes
+//!  @param    ulPriority ulPriority profile priority. Lowest priority:0.
+//!  @param    ulPairwiseCipher_Or_TxKeyLen  key length for WEP security
+//!  @param    ulGroupCipher_TxKeyIndex  key index
+//!  @param    ulKeyMgmt        KEY management 
+//!  @param    ucPf_OrKey       security key
+//!  @param    ulPassPhraseLen  security key length for WPA\WPA2
+//!
+//!  @return    On success, index (1-7) of the stored profile is returned.         
+//!				On error, -1 is returned.        
+//!
+//!  @brief     When auto start is enabled, the device connects to
+//!             station from the profiles table. Up to 7 profiles are supported. 
+//!             If several profiles configured the device choose the highest 
+//!             priority profile, within each priority group, device will choose 
+//!             profile based on security policy, signal strength, etc 
+//!             parameters. All the profiles are stored in CC3000 NVMEM.
+//!
+//!  @sa        wlan_ioctl_del_profile 
+//
+//*****************************************************************************
+
+extern INT32 wlan_add_profile(UINT32 ulSecType, UINT8* ucSsid,
+										 UINT32 ulSsidLen, 
+										 UINT8 *ucBssid,
+                                         UINT32 ulPriority,
+                                         UINT32 ulPairwiseCipher_Or_Key,
+                                         UINT32 ulGroupCipher_TxKeyLen,
+                                         UINT32 ulKeyMgmt,
+                                         UINT8* ucPf_OrKey,
+                                         UINT32 ulPassPhraseLen);
+
+
+
+//*****************************************************************************
+//
+//!  wlan_ioctl_del_profile
+//!
+//!  @param    index   number of profile to delete
+//!
+//!  @return    On success, zero is returned. On error, -1 is returned        
+//!
+//!  @brief     Delete WLAN profile 
+//!
+//!  @Note      In order to delete all stored profile, set index to 255.
+//!
+//!  @sa        wlan_add_profile 
+//
+//*****************************************************************************
+extern INT32 wlan_ioctl_del_profile(UINT32 ulIndex);
+
+//*****************************************************************************
+//
+//!  wlan_set_event_mask
+//!
+//!  @param    mask   mask option:
+//!       HCI_EVNT_WLAN_UNSOL_CONNECT connect event
+//!       HCI_EVNT_WLAN_UNSOL_DISCONNECT disconnect event
+//!       HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE  smart config done
+//!       HCI_EVNT_WLAN_UNSOL_INIT init done
+//!       HCI_EVNT_WLAN_UNSOL_DHCP dhcp event report
+//!       HCI_EVNT_WLAN_ASYNC_PING_REPORT ping report
+//!       HCI_EVNT_WLAN_KEEPALIVE keepalive
+//!       HCI_EVNT_WLAN_TX_COMPLETE - disable information on end of transmission
+//!   	  Saved: no.
+//!
+//!  @return    On success, zero is returned. On error, -1 is returned        
+//!
+//!  @brief    Mask event according to bit mask. In case that event is 
+//!            masked (1), the device will not send the masked event to host. 
+//
+//*****************************************************************************
+extern INT32 wlan_set_event_mask(UINT32 ulMask);
+
+//*****************************************************************************
+//
+//!  wlan_ioctl_statusget
+//!
+//!  @param none 
+//!
+//!  @return    WLAN_STATUS_DISCONNECTED, WLAN_STATUS_SCANING, 
+//!             STATUS_CONNECTING or WLAN_STATUS_CONNECTED      
+//!
+//!  @brief    get wlan status: disconnected, scanning, connecting or connected
+//
+//*****************************************************************************
+extern INT32 wlan_ioctl_statusget(void);
+
+
+//*****************************************************************************
+//
+//!  wlan_ioctl_set_connection_policy
+//!
+//!  @param    should_connect_to_open_ap  enable(1), disable(0) connect to any 
+//!            available AP. This parameter corresponds to the configuration of 
+//!            item # 3 in the brief description.
+//!  @param    should_use_fast_connect enable(1), disable(0). if enabled, tries 
+//!            to connect to the last connected AP. This parameter corresponds 
+//!            to the configuration of item # 1 in the brief description.
+//!  @param    auto_start enable(1), disable(0) auto connect 
+//!            after reset and periodically reconnect if needed. This 
+//!       	   configuration configures option 2 in the above description.
+//!
+//!  @return     On success, zero is returned. On error, -1 is returned        
+//!
+//!  @brief      When auto is enabled, the device tries to connect according 
+//!              the following policy:
+//!              1) If fast connect is enabled and last connection is valid, 
+//!                 the device will try to connect to it without the scanning 
+//!                 procedure (fast). The last connection will be marked as
+//!                 invalid, due to adding/removing profile. 
+//!              2) If profile exists, the device will try to connect it 
+//!                 (Up to seven profiles).
+//!              3) If fast and profiles are not found, and open mode is
+//!                 enabled, the device will try to connect to any AP.
+//!              * Note that the policy settings are stored in the CC3000 NVMEM.
+//!
+//!  @sa         wlan_add_profile , wlan_ioctl_del_profile 
+//
+//*****************************************************************************
+extern INT32 wlan_ioctl_set_connection_policy(
+                                        UINT32 should_connect_to_open_ap,
+                                        UINT32 should_use_fast_connect,
+                                        UINT32 ulUseProfiles);
+
+//*****************************************************************************
+//
+//!  wlan_ioctl_get_scan_results
+//!
+//!  @param[in]    scan_timeout   parameter not supported
+//!  @param[out]   ucResults  scan result (_wlan_full_scan_results_args_t)
+//!
+//!  @return    On success, zero is returned. On error, -1 is returned        
+//!
+//!  @brief    Gets entry from scan result table.
+//!            The scan results are returned one by one, and each entry 
+//!            represents a single AP found in the area. The following is a 
+//!            format of the scan result: 
+//!        	 - 4 Bytes: number of networks found
+//!          - 4 Bytes: The status of the scan: 0 - aged results,
+//!                     1 - results valid, 2 - no results
+//!          - 42 bytes: Result entry, where the bytes are arranged as  follows:
+//!              
+//!          				- 1 bit isValid - is result valid or not
+//!         				- 7 bits rssi - RSSI value;	 
+//!                 - 2 bits: securityMode - security mode of the AP:
+//!                           0 - Open, 1 - WEP, 2 WPA, 3 WPA2
+//!         				- 6 bits: SSID name length
+//!         				- 2 bytes: the time at which the entry has entered into 
+//!                            scans result table
+//!         				- 32 bytes: SSID name
+//!                 - 6 bytes:	BSSID 
+//!
+//!  @Note      scan_timeout, is not supported on this version.
+//!
+//!  @sa        wlan_ioctl_set_scan_params 
+//
+//*****************************************************************************
+
+
+extern INT32 wlan_ioctl_get_scan_results(UINT32 ulScanTimeout,
+                                       UINT8 *ucResults);
+
+//*****************************************************************************
+//
+//!  wlan_ioctl_set_scan_params
+//!
+//!  @param    uiEnable - start/stop application scan: 
+//!            1 = start scan with default interval value of 10 min. 
+//!            in order to set a different scan interval value apply the value 
+//!            in milliseconds. minimum 1 second. 0=stop). Wlan reset
+//!           (wlan_stop() wlan_start()) is needed when changing scan interval
+//!            value. Saved: No
+//!  @param   uiMinDwellTime   minimum dwell time value to be used for each 
+//!           channel, in milliseconds. Saved: yes
+//!           Recommended Value: 100 (Default: 20)
+//!  @param   uiMaxDwellTime    maximum dwell time value to be used for each
+//!           channel, in milliseconds. Saved: yes
+//!           Recommended Value: 100 (Default: 30)
+//!  @param   uiNumOfProbeRequests  max probe request between dwell time. 
+//!           Saved: yes. Recommended Value: 5 (Default:2)
+//!  @param   uiChannelMask  bitwise, up to 13 channels (0x1fff). 
+//!           Saved: yes. Default: 0x7ff
+//!  @param   uiRSSIThreshold   RSSI threshold. Saved: yes (Default: -80)
+//!  @param   uiSNRThreshold    NSR threshold. Saved: yes (Default: 0)
+//!  @param   uiDefaultTxPower  probe Tx power. Saved: yes (Default: 205)
+//!  @param   aiIntervalList    pointer to array with 16 entries (16 channels) 
+//!           each entry (UINT32) holds timeout between periodic scan 
+//!           (connection scan) - in milliseconds. Saved: yes. Default 2000ms.
+//!
+//!  @return    On success, zero is returned. On error, -1 is returned        
+//!
+//!  @brief    start and stop scan procedure. Set scan parameters. 
+//!
+//!  @Note     uiDefaultTxPower, is not supported on this version.
+//!
+//!  @sa        wlan_ioctl_get_scan_results 
+//
+//*****************************************************************************
+extern INT32 wlan_ioctl_set_scan_params(UINT32 uiEnable, UINT32 
+											 uiMinDwellTime,UINT32 uiMaxDwellTime,
+										   UINT32 uiNumOfProbeRequests,
+											 UINT32 uiChannelMask,
+										   INT32 iRSSIThreshold,UINT32 uiSNRThreshold,
+										   UINT32 uiDefaultTxPower, 
+											 UINT32 *aiIntervalList);
+
+                                           
+//*****************************************************************************
+//
+//!  wlan_smart_config_start
+//!
+//!  @param    algoEncryptedFlag indicates whether the information is encrypted
+//!
+//!  @return   On success, zero is returned. On error, -1 is returned        
+//!
+//!  @brief   Start to acquire device profile. The device acquire its own 
+//!           profile, if profile message is found. The acquired AP information
+//!           is stored in CC3000 EEPROM only in case AES128 encryption is used.
+//!           In case AES128 encryption is not used, a profile is created by 
+//!           CC3000 internally.
+//!
+//!  @Note    An asynchronous event - Smart Config Done will be generated as soon
+//!           as the process finishes successfully.
+//!
+//!  @sa      wlan_smart_config_set_prefix , wlan_smart_config_stop
+//
+//*****************************************************************************                                        
+extern INT32 wlan_smart_config_start(UINT32 algoEncryptedFlag);
+
+
+//*****************************************************************************
+//
+//!  wlan_smart_config_stop
+//!
+//!  @param    algoEncryptedFlag indicates whether the information is encrypted
+//!
+//!  @return   On success, zero is returned. On error, -1 is returned        
+//!
+//!  @brief   Stop the acquire profile procedure 
+//!
+//!  @sa      wlan_smart_config_start , wlan_smart_config_set_prefix
+//
+//*****************************************************************************
+extern INT32 wlan_smart_config_stop(void);
+
+//*****************************************************************************
+//
+//!  wlan_smart_config_set_prefix
+//!
+//!  @param   newPrefix  3 bytes identify the SSID prefix for the Smart Config. 
+//!
+//!  @return   On success, zero is returned. On error, -1 is returned        
+//!
+//!  @brief   Configure station ssid prefix. The prefix is used internally 
+//!           in CC3000. It should always be TTT.
+//!
+//!  @Note    The prefix is stored in CC3000 NVMEM
+//!
+//!  @sa      wlan_smart_config_start , wlan_smart_config_stop
+//
+//*****************************************************************************
+extern INT32 wlan_smart_config_set_prefix(CHAR* cNewPrefix);
+
+//*****************************************************************************
+//
+//!  wlan_smart_config_process
+//!
+//!  @param   none 
+//!
+//!  @return   On success, zero is returned. On error, -1 is returned        
+//!
+//!  @brief   process the acquired data and store it as a profile. The acquired 
+//!           AP information is stored in CC3000 EEPROM encrypted.
+//!           The encrypted data is decrypted and stored as a profile.
+//!           behavior is as defined by connection policy.
+//
+//*****************************************************************************
+extern INT32 wlan_smart_config_process(void);
+
+//*****************************************************************************
+//
+// Close the Doxygen group.
+//! @}
+//
+//*****************************************************************************
+
+
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef	__cplusplus
+}
+#endif // __cplusplus
+
+#endif	// __WLAN_H__