Fix build for netduino and stm32f4disc

2 files changed, 4 insertions, 1 deletions

diff --git a/stm/main.c b/stm/main.c
index 14fda936db..52ac11d81b 100644
--- a/stm/main.c
+++ b/stm/main.c
@@ -54,7 +54,9 @@
 int errno;
 
 static FATFS fatfs0;
+#if MICROPY_HW_HAS_SDCARD
 static FATFS fatfs1;
+#endif
 
 void flash_error(int n) {
     for (int i = 0; i < n; i++) {
diff --git a/stm/stmperiph/stm324x7i_eval.c b/stm/stmperiph/stm324x7i_eval.c
index 2a8943936d..c5a9d425c8 100644
--- a/stm/stmperiph/stm324x7i_eval.c
+++ b/stm/stmperiph/stm324x7i_eval.c
@@ -89,7 +89,6 @@ void SD_LowLevel_DeInit(void)
  * yet still detect when a card is inserted.

  */

 void SD_LowLevel_Init_Detect(void) {

-  GPIO_InitTypeDef  GPIO_InitStructure;

 

   /* Periph clock enable */

   RCC_AHB1PeriphClockCmd(SD_DETECT_GPIO_CLK, ENABLE);

@@ -97,6 +96,7 @@ void SD_LowLevel_Init_Detect(void) {
   /*!< Configure SD_SPI_DETECT_PIN pin: SD Card detect pin */

 #if defined(PYBOARD3)

   // dpgeorge: PYBv2-v3: switch is normally open, connected to VDD when card inserted

+  GPIO_InitTypeDef  GPIO_InitStructure;

   GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN;

   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; // needs to be 2MHz due to restrictions on PC13

   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;

@@ -104,6 +104,7 @@ void SD_LowLevel_Init_Detect(void) {
   GPIO_Init(SD_DETECT_GPIO_PORT, &GPIO_InitStructure);

 #elif defined(PYBOARD4)

   // dpgeorge: PYBv4: switch is normally open, connected to GND when card inserted

+  GPIO_InitTypeDef  GPIO_InitStructure;

   GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN;

   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;

   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;