diff options
Diffstat (limited to 'Lib/plat-mac/macerrors.py')
| -rw-r--r-- | Lib/plat-mac/macerrors.py | 1857 |
1 files changed, 0 insertions, 1857 deletions
diff --git a/Lib/plat-mac/macerrors.py b/Lib/plat-mac/macerrors.py deleted file mode 100644 index 58d79d61746..00000000000 --- a/Lib/plat-mac/macerrors.py +++ /dev/null @@ -1,1857 +0,0 @@ -# -coding=latin1- - -from warnings import warnpy3k -warnpy3k("In 3.x, the macerrors module is removed.", stacklevel=2) - -svTempDisable = -32768 #svTempDisable -svDisabled = -32640 #Reserve range -32640 to -32768 for Apple temp disables. -fontNotOutlineErr = -32615 #bitmap font passed to routine that does outlines only -kURL68kNotSupportedError = -30788 #kURL68kNotSupportedError -kURLAccessNotAvailableError = -30787 #kURLAccessNotAvailableError -kURLInvalidConfigurationError = -30786 #kURLInvalidConfigurationError -kURLExtensionFailureError = -30785 #kURLExtensionFailureError -kURLFileEmptyError = -30783 #kURLFileEmptyError -kURLInvalidCallError = -30781 #kURLInvalidCallError -kURLUnsettablePropertyError = -30780 #kURLUnsettablePropertyError -kURLPropertyBufferTooSmallError = -30779 #kURLPropertyBufferTooSmallError -kURLUnknownPropertyError = -30778 #kURLUnknownPropertyError -kURLPropertyNotYetKnownError = -30777 #kURLPropertyNotYetKnownError -kURLAuthenticationError = -30776 #kURLAuthenticationError -kURLServerBusyError = -30775 #kURLServerBusyError -kURLUnsupportedSchemeError = -30774 #kURLUnsupportedSchemeError -kURLInvalidURLError = -30773 #kURLInvalidURLError -kURLDestinationExistsError = -30772 #kURLDestinationExistsError -kURLProgressAlreadyDisplayedError = -30771 #kURLProgressAlreadyDisplayedError -kURLInvalidURLReferenceError = -30770 #kURLInvalidURLReferenceError -controlHandleInvalidErr = -30599 #controlHandleInvalidErr -controlInvalidDataVersionErr = -30597 #controlInvalidDataVersionErr -errItemNotControl = -30596 #errItemNotControl -errCantEmbedRoot = -30595 #errCantEmbedRoot -errCantEmbedIntoSelf = -30594 #errCantEmbedIntoSelf -errWindowRegionCodeInvalid = -30593 #errWindowRegionCodeInvalid -errControlHiddenOrDisabled = -30592 #errControlHiddenOrDisabled -errDataSizeMismatch = -30591 #errDataSizeMismatch -errControlIsNotEmbedder = -30590 #errControlIsNotEmbedder -errControlsAlreadyExist = -30589 #errControlsAlreadyExist -errInvalidPartCode = -30588 #errInvalidPartCode -errRootAlreadyExists = -30587 #errRootAlreadyExists -errNoRootControl = -30586 #errNoRootControl -errCouldntSetFocus = -30585 #errCouldntSetFocus -errUnknownControl = -30584 #errUnknownControl -errWindowDoesntSupportFocus = -30583 #errWindowDoesntSupportFocus -errControlDoesntSupportFocus = -30582 #errControlDoesntSupportFocus -errDataNotSupported = -30581 #errDataNotSupported -errMessageNotSupported = -30580 #errMessageNotSupported -themeMonitorDepthNotSupportedErr = -30567 #theme not supported at monitor depth -themeScriptFontNotFoundErr = -30566 #theme font requested for uninstalled script system -themeBadCursorIndexErr = -30565 #themeBadCursorIndexErr -themeHasNoAccentsErr = -30564 #themeHasNoAccentsErr -themeBadTextColorErr = -30563 #themeBadTextColorErr -themeProcessNotRegisteredErr = -30562 #themeProcessNotRegisteredErr -themeProcessRegisteredErr = -30561 #themeProcessRegisteredErr -themeInvalidBrushErr = -30560 #pattern index invalid -qtvrUninitialized = -30555 #qtvrUninitialized -qtvrLibraryLoadErr = -30554 #qtvrLibraryLoadErr -streamingNodeNotReadyErr = -30553 #streamingNodeNotReadyErr -noMemoryNodeFailedInitialize = -30552 #noMemoryNodeFailedInitialize -invalidHotSpotIDErr = -30551 #invalidHotSpotIDErr -invalidNodeFormatErr = -30550 #invalidNodeFormatErr -limitReachedErr = -30549 #limitReachedErr -settingNotSupportedByNodeErr = -30548 #settingNotSupportedByNodeErr -propertyNotSupportedByNodeErr = -30547 #propertyNotSupportedByNodeErr -timeNotInViewErr = -30546 #timeNotInViewErr -invalidViewStateErr = -30545 #invalidViewStateErr -invalidNodeIDErr = -30544 #invalidNodeIDErr -selectorNotSupportedByNodeErr = -30543 #selectorNotSupportedByNodeErr -callNotSupportedByNodeErr = -30542 #callNotSupportedByNodeErr -constraintReachedErr = -30541 #constraintReachedErr -notAQTVRMovieErr = -30540 #notAQTVRMovieErr -kFBCnoSuchHit = -30532 #kFBCnoSuchHit -kFBCbadSearchSession = -30531 #kFBCbadSearchSession -kFBCindexDiskIOFailed = -30530 #kFBCindexDiskIOFailed -kFBCsummarizationCanceled = -30529 #kFBCsummarizationCanceled -kFBCbadIndexFileVersion = -30528 #kFBCbadIndexFileVersion -kFBCanalysisNotAvailable = -30527 #kFBCanalysisNotAvailable -kFBCillegalSessionChange = -30526 #tried to add/remove vols to a session -kFBCsomeFilesNotIndexed = -30525 #kFBCsomeFilesNotIndexed -kFBCsearchFailed = -30524 #kFBCsearchFailed -kFBCindexNotAvailable = -30523 #kFBCindexNotAvailable -kFBCindexFileDestroyed = -30522 #kFBCindexFileDestroyed -kFBCaccessCanceled = -30521 #kFBCaccessCanceled -kFBCindexingCanceled = -30520 #kFBCindexingCanceled -kFBCnoSearchSession = -30519 #kFBCnoSearchSession -kFBCindexNotFound = -30518 #kFBCindexNotFound -kFBCflushFailed = -30517 #kFBCflushFailed -kFBCaddDocFailed = -30516 #kFBCaddDocFailed -kFBCaccessorStoreFailed = -30515 #kFBCaccessorStoreFailed -kFBCindexCreationFailed = -30514 #couldn't create index -kFBCmergingFailed = -30513 #couldn't merge index files -kFBCtokenizationFailed = -30512 #couldn't read from document or query -kFBCmoveFailed = -30511 #V-Twin exception caught -kFBCdeletionFailed = -30510 #V-Twin exception caught -kFBCcommitFailed = -30509 #V-Twin exception caught -kFBCindexingFailed = -30508 #V-Twin exception caught -kFBCvalidationFailed = -30507 #V-Twin exception caught -kFBCcompactionFailed = -30506 #V-Twin exception caught -kFBCbadIndexFile = -30505 #bad FSSpec, or bad data in file -kFBCfileNotIndexed = -30504 #kFBCfileNotIndexed -kFBCbadParam = -30503 #kFBCbadParam -kFBCallocFailed = -30502 #probably low memory -kFBCnoIndexesFound = -30501 #kFBCnoIndexesFound -kFBCvTwinExceptionErr = -30500 #no telling what it was -kDSpStereoContextErr = -30450 #kDSpStereoContextErr -kDSpInternalErr = -30449 #kDSpInternalErr -kDSpConfirmSwitchWarning = -30448 #kDSpConfirmSwitchWarning -kDSpFrameRateNotReadyErr = -30447 #kDSpFrameRateNotReadyErr -kDSpContextNotFoundErr = -30446 #kDSpContextNotFoundErr -kDSpContextNotReservedErr = -30445 #kDSpContextNotReservedErr -kDSpContextAlreadyReservedErr = -30444 #kDSpContextAlreadyReservedErr -kDSpInvalidAttributesErr = -30443 #kDSpInvalidAttributesErr -kDSpInvalidContextErr = -30442 #kDSpInvalidContextErr -kDSpSystemSWTooOldErr = -30441 #kDSpSystemSWTooOldErr -kDSpNotInitializedErr = -30440 #kDSpNotInitializedErr -kISpListBusyErr = -30429 #kISpListBusyErr -kISpDeviceActiveErr = -30428 #kISpDeviceActiveErr -kISpSystemActiveErr = -30427 #kISpSystemActiveErr -kISpDeviceInactiveErr = -30426 #kISpDeviceInactiveErr -kISpSystemInactiveErr = -30425 #kISpSystemInactiveErr -kISpElementNotInListErr = -30424 #kISpElementNotInListErr -kISpElementInListErr = -30423 #kISpElementInListErr -kISpBufferToSmallErr = -30422 #kISpBufferToSmallErr -kISpSystemListErr = -30421 #kISpSystemListErr -kISpInternalErr = -30420 #kISpInternalErr -kNSpJoinFailedErr = -30399 #kNSpJoinFailedErr -kNSpCantBlockErr = -30398 #kNSpCantBlockErr -kNSpMessageTooBigErr = -30397 #kNSpMessageTooBigErr -kNSpSendFailedErr = -30396 #kNSpSendFailedErr -kNSpConnectFailedErr = -30395 #kNSpConnectFailedErr -kNSpGameTerminatedErr = -30394 #kNSpGameTerminatedErr -kNSpTimeoutErr = -30393 #kNSpTimeoutErr -kNSpInvalidProtocolListErr = -30392 #kNSpInvalidProtocolListErr -kNSpInvalidProtocolRefErr = -30391 #kNSpInvalidProtocolRefErr -kNSpInvalidDefinitionErr = -30390 #kNSpInvalidDefinitionErr -kNSpAddPlayerFailedErr = -30389 #kNSpAddPlayerFailedErr -kNSpCreateGroupFailedErr = -30388 #kNSpCreateGroupFailedErr -kNSpNoHostVolunteersErr = -30387 #kNSpNoHostVolunteersErr -kNSpNoGroupsErr = -30386 #kNSpNoGroupsErr -kNSpNoPlayersErr = -30385 #kNSpNoPlayersErr -kNSpInvalidGroupIDErr = -30384 #kNSpInvalidGroupIDErr -kNSpInvalidPlayerIDErr = -30383 #kNSpInvalidPlayerIDErr -kNSpNameRequiredErr = -30382 #kNSpNameRequiredErr -kNSpFeatureNotImplementedErr = -30381 #kNSpFeatureNotImplementedErr -kNSpAddressInUseErr = -30380 #kNSpAddressInUseErr -kNSpRemovePlayerFailedErr = -30379 #kNSpRemovePlayerFailedErr -kNSpFreeQExhaustedErr = -30378 #kNSpFreeQExhaustedErr -kNSpInvalidAddressErr = -30377 #kNSpInvalidAddressErr -kNSpNotAdvertisingErr = -30376 #kNSpNotAdvertisingErr -kNSpAlreadyAdvertisingErr = -30374 #kNSpAlreadyAdvertisingErr -kNSpMemAllocationErr = -30373 #kNSpMemAllocationErr -kNSpOTVersionTooOldErr = -30371 #kNSpOTVersionTooOldErr -kNSpOTNotPresentErr = -30370 #kNSpOTNotPresentErr -kNSpInvalidParameterErr = -30369 #kNSpInvalidParameterErr -kNSpInvalidGameRefErr = -30367 #kNSpInvalidGameRefErr -kNSpProtocolNotAvailableErr = -30366 #kNSpProtocolNotAvailableErr -kNSpHostFailedErr = -30365 #kNSpHostFailedErr -kNSpPipeFullErr = -30364 #kNSpPipeFullErr -kNSpTopologyNotSupportedErr = -30362 #kNSpTopologyNotSupportedErr -kNSpAlreadyInitializedErr = -30361 #kNSpAlreadyInitializedErr -kNSpInitializationFailedErr = -30360 #kNSpInitializationFailedErr -kSSpScaleToZeroErr = -30344 #kSSpScaleToZeroErr -kSSpParallelUpVectorErr = -30343 #kSSpParallelUpVectorErr -kSSpCantInstallErr = -30342 #kSSpCantInstallErr -kSSpVersionErr = -30341 #kSSpVersionErr -kSSpInternalErr = -30340 #kSSpInternalErr -kALMInternalErr = -30049 #kALMInternalErr -kALMGroupNotFoundErr = -30048 #kALMGroupNotFoundErr -kALMNoSuchModuleErr = -30047 #kALMNoSuchModuleErr -kALMModuleCommunicationErr = -30046 #kALMModuleCommunicationErr -kALMDuplicateModuleErr = -30045 #kALMDuplicateModuleErr -kALMInstallationErr = -30044 #kALMInstallationErr -kALMDeferSwitchErr = -30043 #kALMDeferSwitchErr -kALMRebootFlagsLevelErr = -30042 #kALMRebootFlagsLevelErr -kLocalesDefaultDisplayStatus = -30029 #Requested display locale unavailable, used default -kLocalesTableFormatErr = -30002 #kLocalesTableFormatErr -kLocalesBufferTooSmallErr = -30001 #kLocalesBufferTooSmallErr -kFNSNameNotFoundErr = -29589 #The name with the requested paramters was not found -kFNSBadFlattenedSizeErr = -29587 #flattened size didn't match input or was too small -kFNSInsufficientDataErr = -29586 #insufficient data for the operation -kFNSMismatchErr = -29585 #reference didn't match or wasn't found in profile -kFNSDuplicateReferenceErr = -29584 #the ref. being added is already in the profile -kFNSBadProfileVersionErr = -29583 #profile version is out of known range -kFNSInvalidProfileErr = -29582 #profile is NULL or otherwise bad -kFNSBadReferenceVersionErr = -29581 #ref. version is out of known range -kFNSInvalidReferenceErr = -29580 #ref. was NULL or otherwise bad -kCollateInvalidCollationRef = -29507 #kCollateInvalidCollationRef -kCollateBufferTooSmall = -29506 #kCollateBufferTooSmall -kCollateInvalidChar = -29505 #kCollateInvalidChar -kCollatePatternNotFoundErr = -29504 #kCollatePatternNotFoundErr -kCollateUnicodeConvertFailedErr = -29503 #kCollateUnicodeConvertFailedErr -kCollateMissingUnicodeTableErr = -29502 #kCollateMissingUnicodeTableErr -kCollateInvalidOptions = -29501 #kCollateInvalidOptions -kCollateAttributesNotFoundErr = -29500 #kCollateAttributesNotFoundErr -kMPInvalidIDErr = -29299 #kMPInvalidIDErr -kMPInsufficientResourcesErr = -29298 #kMPInsufficientResourcesErr -kMPTaskAbortedErr = -29297 #kMPTaskAbortedErr -kMPTimeoutErr = -29296 #kMPTimeoutErr -kMPDeletedErr = -29295 #kMPDeletedErr -kMPBlueBlockingErr = -29293 #kMPBlueBlockingErr -kMPTaskStoppedErr = -29292 #A convention used with MPThrowException. -kMPTaskBlockedErr = -29291 #kMPTaskBlockedErr -kMPTaskCreatedErr = -29290 #kMPTaskCreatedErr -kMPProcessTerminatedErr = -29289 #kMPProcessTerminatedErr -kMPProcessCreatedErr = -29288 #kMPProcessCreatedErr -kMPPrivilegedErr = -29276 #kMPPrivilegedErr -kMPIterationEndErr = -29275 #kMPIterationEndErr -kUCTextBreakLocatorMissingType = -25341 #Unicode text break error -kUCOutputBufferTooSmall = -25340 #Output buffer too small for Unicode string result -errKCCreateChainFailed = -25318 #errKCCreateChainFailed -errKCDataNotModifiable = -25317 #errKCDataNotModifiable -errKCDataNotAvailable = -25316 #errKCDataNotAvailable -errKCInteractionRequired = -25315 #errKCInteractionRequired -errKCNoPolicyModule = -25314 #errKCNoPolicyModule -errKCNoCertificateModule = -25313 #errKCNoCertificateModule -errKCNoStorageModule = -25312 #errKCNoStorageModule -errKCKeySizeNotAllowed = -25311 #errKCKeySizeNotAllowed -errKCWrongKCVersion = -25310 #errKCWrongKCVersion -errKCReadOnlyAttr = -25309 #errKCReadOnlyAttr -errKCInteractionNotAllowed = -25308 #errKCInteractionNotAllowed -errKCNoDefaultKeychain = -25307 #errKCNoDefaultKeychain -errKCNoSuchClass = -25306 #errKCNoSuchClass -errKCInvalidSearchRef = -25305 #errKCInvalidSearchRef -errKCInvalidItemRef = -25304 #errKCInvalidItemRef -errKCNoSuchAttr = -25303 #errKCNoSuchAttr -errKCDataTooLarge = -25302 #errKCDataTooLarge -errKCBufferTooSmall = -25301 #errKCBufferTooSmall -errKCItemNotFound = -25300 #errKCItemNotFound -errKCDuplicateItem = -25299 #errKCDuplicateItem -errKCInvalidCallback = -25298 #errKCInvalidCallback -errKCDuplicateCallback = -25297 #errKCDuplicateCallback -errKCDuplicateKeychain = -25296 #errKCDuplicateKeychain -errKCInvalidKeychain = -25295 #errKCInvalidKeychain -errKCNoSuchKeychain = -25294 #errKCNoSuchKeychain -errKCAuthFailed = -25293 #errKCAuthFailed -errKCReadOnly = -25292 #errKCReadOnly -errKCNotAvailable = -25291 #errKCNotAvailable -printerStatusOpCodeNotSupportedErr = -25280 #printerStatusOpCodeNotSupportedErr -kTXNOutsideOfFrameErr = -22018 #kTXNOutsideOfFrameErr -kTXNOutsideOfLineErr = -22017 #kTXNOutsideOfLineErr -kTXNATSUIIsNotInstalledErr = -22016 #kTXNATSUIIsNotInstalledErr -kTXNDataTypeNotAllowedErr = -22015 #kTXNDataTypeNotAllowedErr -kTXNCopyNotAllowedInEchoModeErr = -22014 #kTXNCopyNotAllowedInEchoModeErr -kTXNCannotTurnTSMOffWhenUsingUnicodeErr = -22013 #kTXNCannotTurnTSMOffWhenUsingUnicodeErr -kTXNAlreadyInitializedErr = -22012 #kTXNAlreadyInitializedErr -kTXNInvalidRunIndex = -22011 #kTXNInvalidRunIndex -kTXNSomeOrAllTagsInvalidForRunErr = -22010 #kTXNSomeOrAllTagsInvalidForRunErr -kTXNAttributeTagInvalidForRunErr = -22009 #dataValue is set to this per invalid tag -kTXNNoMatchErr = -22008 #kTXNNoMatchErr -kTXNRunIndexOutofBoundsErr = -22007 #kTXNRunIndexOutofBoundsErr -kTXNCannotSetAutoIndentErr = -22006 #kTXNCannotSetAutoIndentErr -kTXNBadDefaultFileTypeWarning = -22005 #kTXNBadDefaultFileTypeWarning -kTXNUserCanceledOperationErr = -22004 #kTXNUserCanceledOperationErr -kTXNIllegalToCrossDataBoundariesErr = -22003 #kTXNIllegalToCrossDataBoundariesErr -kTXNInvalidFrameIDErr = -22002 #kTXNInvalidFrameIDErr -kTXNCannotAddFrameErr = -22001 #kTXNCannotAddFrameErr -kTXNEndIterationErr = -22000 #kTXNEndIterationErr -invalidIndexErr = -20002 #The recordIndex parameter is not valid. -recordDataTooBigErr = -20001 #The record data is bigger than buffer size (1024 bytes). -unknownInsertModeErr = -20000 #There is no such an insert mode. -kModemScriptMissing = -14002 #kModemScriptMissing -kModemPreferencesMissing = -14001 #kModemPreferencesMissing -kModemOutOfMemory = -14000 #kModemOutOfMemory -kHIDBaseError = -13950 #kHIDBaseError -kHIDNullStateErr = -13949 #kHIDNullStateErr -kHIDBufferTooSmallErr = -13948 #kHIDBufferTooSmallErr -kHIDValueOutOfRangeErr = -13947 #kHIDValueOutOfRangeErr -kHIDUsageNotFoundErr = -13946 #kHIDUsageNotFoundErr -kHIDNotValueArrayErr = -13945 #kHIDNotValueArrayErr -kHIDInvalidPreparsedDataErr = -13944 #kHIDInvalidPreparsedDataErr -kHIDIncompatibleReportErr = -13943 #kHIDIncompatibleReportErr -kHIDBadLogPhysValuesErr = -13942 #kHIDBadLogPhysValuesErr -kHIDInvalidReportTypeErr = -13941 #kHIDInvalidReportTypeErr -kHIDInvalidReportLengthErr = -13940 #kHIDInvalidReportLengthErr -kHIDNullPointerErr = -13939 #kHIDNullPointerErr -kHIDBadParameterErr = -13938 #kHIDBadParameterErr -kHIDNotEnoughMemoryErr = -13937 #kHIDNotEnoughMemoryErr -kHIDEndOfDescriptorErr = -13936 #kHIDEndOfDescriptorErr -kHIDUsagePageZeroErr = -13935 #kHIDUsagePageZeroErr -kHIDBadLogicalMinimumErr = -13934 #kHIDBadLogicalMinimumErr -kHIDBadLogicalMaximumErr = -13933 #kHIDBadLogicalMaximumErr -kHIDInvertedLogicalRangeErr = -13932 #kHIDInvertedLogicalRangeErr -kHIDInvertedPhysicalRangeErr = -13931 #kHIDInvertedPhysicalRangeErr -kHIDUnmatchedUsageRangeErr = -13930 #kHIDUnmatchedUsageRangeErr -kHIDInvertedUsageRangeErr = -13929 #kHIDInvertedUsageRangeErr -kHIDUnmatchedStringRangeErr = -13928 #kHIDUnmatchedStringRangeErr -kHIDUnmatchedDesignatorRangeErr = -13927 #kHIDUnmatchedDesignatorRangeErr -kHIDReportSizeZeroErr = -13926 #kHIDReportSizeZeroErr -kHIDReportCountZeroErr = -13925 #kHIDReportCountZeroErr -kHIDReportIDZeroErr = -13924 #kHIDReportIDZeroErr -kHIDInvalidRangePageErr = -13923 #kHIDInvalidRangePageErr -kHIDDeviceNotReady = -13910 #The device is still initializing, try again later -kHIDVersionIncompatibleErr = -13909 #kHIDVersionIncompatibleErr -debuggingNoMatchErr = -13887 #debugging component or option not found at this index -debuggingNoCallbackErr = -13886 #debugging component has no callback -debuggingInvalidNameErr = -13885 #componentName or optionName is invalid (NULL) -debuggingInvalidOptionErr = -13884 #optionSelectorNum is not registered -debuggingInvalidSignatureErr = -13883 #componentSignature not registered -debuggingDuplicateOptionErr = -13882 #optionSelectorNum already registered -debuggingDuplicateSignatureErr = -13881 #componentSignature already registered -debuggingExecutionContextErr = -13880 #routine cannot be called at this time -kBridgeSoftwareRunningCantSleep = -13038 #kBridgeSoftwareRunningCantSleep -kNoSuchPowerSource = -13020 #kNoSuchPowerSource -kProcessorTempRoutineRequiresMPLib2 = -13014 #kProcessorTempRoutineRequiresMPLib2 -kCantReportProcessorTemperatureErr = -13013 #kCantReportProcessorTemperatureErr -kPowerMgtRequestDenied = -13010 #kPowerMgtRequestDenied -kPowerMgtMessageNotHandled = -13009 #kPowerMgtMessageNotHandled -kPowerHandlerNotFoundForProcErr = -13008 #kPowerHandlerNotFoundForProcErr -kPowerHandlerNotFoundForDeviceErr = -13007 #kPowerHandlerNotFoundForDeviceErr -kPowerHandlerExistsForDeviceErr = -13006 #kPowerHandlerExistsForDeviceErr -pmRecvEndErr = -13005 #during receive, pmgr did not finish hs configured for this connection -pmRecvStartErr = -13004 #during receive, pmgr did not start hs -pmSendEndErr = -13003 #during send, pmgr did not finish hs -pmSendStartErr = -13002 #during send, pmgr did not start hs -pmReplyTOErr = -13001 #Timed out waiting for reply -pmBusyErr = -13000 #Power Mgr never ready to start handshake -pictureDataErr = -11005 #the picture data was invalid -colorsRequestedErr = -11004 #the number of colors requested was illegal -cantLoadPickMethodErr = -11003 #unable to load the custom pick proc -pictInfoVerbErr = -11002 #the passed verb was invalid -pictInfoIDErr = -11001 #the internal consistancy check for the PictInfoID is wrong -pictInfoVersionErr = -11000 #wrong version of the PictInfo structure -errTaskNotFound = -10780 #no task with that task id exists -telNotEnoughdspBW = -10116 #not enough real-time for allocation -telBadSampleRate = -10115 #incompatible sample rate -telBadSWErr = -10114 #Software not installed properly -telDetAlreadyOn = -10113 #detection is already turned on -telAutoAnsNotOn = -10112 #autoAnswer in not turned on -telValidateFailed = -10111 #telValidate failed -telBadProcID = -10110 #invalid procID -telDeviceNotFound = -10109 #device not found -telBadCodeResource = -10108 #code resource not found -telInitFailed = -10107 #initialization failed -telNoCommFolder = -10106 #Communications/Extensions € not found -telUnknownErr = -10103 #unable to set config -telNoSuchTool = -10102 #unable to find tool with name specified -telBadFunction = -10091 #bad msgCode specified -telPBErr = -10090 #parameter block error, bad format -telCANotDeflectable = -10082 #CA not "deflectable" -telCANotRejectable = -10081 #CA not "rejectable" -telCANotAcceptable = -10080 #CA not "acceptable" -telTermNotOpen = -10072 #terminal not opened via TELOpenTerm -telStillNeeded = -10071 #terminal driver still needed by someone else -telAlreadyOpen = -10070 #terminal already open -telNoCallbackRef = -10064 #no call back reference was specified, but is required -telDisplayModeNotSupp = -10063 #display mode not supported by tool -telBadDisplayMode = -10062 #bad display mode specified -telFwdTypeNotSupp = -10061 #forward type not supported by tool -telDNTypeNotSupp = -10060 #DN type not supported by tool -telBadRate = -10059 #bad rate specified -telBadBearerType = -10058 #bad bearerType specified -telBadSelect = -10057 #unable to select or deselect DN -telBadParkID = -10056 #bad park id specified -telBadPickupGroupID = -10055 #bad pickup group ID specified -telBadFwdType = -10054 #bad fwdType specified -telBadFeatureID = -10053 #bad feature ID specified -telBadIntercomID = -10052 #bad intercom ID specified -telBadPageID = -10051 #bad page ID specified -telBadDNType = -10050 #DN type invalid -telConfLimitExceeded = -10047 #attempt to exceed switch conference limits -telCBErr = -10046 #call back feature not set previously -telTransferRej = -10045 #transfer request rejected -telTransferErr = -10044 #transfer not prepared -telConfRej = -10043 #conference request was rejected -telConfErr = -10042 #conference was not prepared -telConfNoLimit = -10041 #no limit was specified but required -telConfLimitErr = -10040 #limit specified is too high for this configuration -telFeatNotSupp = -10033 #feature program call not supported by this tool -telFeatActive = -10032 #feature already active -telFeatNotAvail = -10031 #feature subscribed but not available -telFeatNotSub = -10030 #feature not subscribed -errAEPropertiesClash = -10025 #illegal combination of properties settings for Set Data, make new, or duplicate -errAECantPutThatThere = -10024 #in make new, duplicate, etc. class can't be an element of container -errAENotAnEnumMember = -10023 #enumerated value in SetData is not allowed for this property -telIntExtNotSupp = -10022 #internal external type not supported by this tool -telBadIntExt = -10021 #bad internal external error -telStateNotSupp = -10020 #device state not supported by tool -telBadStateErr = -10019 #bad device state specified -telIndexNotSupp = -10018 #index not supported by this tool -telBadIndex = -10017 #bad index specified -telAPattNotSupp = -10016 #alerting pattern not supported by tool -telBadAPattErr = -10015 #bad alerting pattern specified -telVTypeNotSupp = -10014 #volume type not supported by this tool -telBadVTypeErr = -10013 #bad volume type error -telBadLevelErr = -10012 #bad volume level setting -telHTypeNotSupp = -10011 #hook type not supported by this tool -telBadHTypeErr = -10010 #bad hook type specified -errAECantSupplyType = -10009 #errAECantSupplyType -telNoOpenErr = -10008 #unable to open terminal -telNoMemErr = -10007 #no memory to allocate handle -errOSACantAssign = -10006 #Signaled when an object cannot be set in a container. -telBadProcErr = -10005 #bad msgProc specified -telBadHandErr = -10004 #bad handle specified -OSAIllegalAssign = -10003 #Signaled when an object can never be set in a container -telBadDNErr = -10002 #TELDNHandle not found or invalid -telBadTermErr = -10001 #invalid TELHandle or handle not found -errAEEventFailed = -10000 #errAEEventFailed -cannotMoveAttachedController = -9999 #cannotMoveAttachedController -controllerHasFixedHeight = -9998 #controllerHasFixedHeight -cannotSetWidthOfAttachedController = -9997 #cannotSetWidthOfAttachedController -controllerBoundsNotExact = -9996 #controllerBoundsNotExact -editingNotAllowed = -9995 #editingNotAllowed -badControllerHeight = -9994 #badControllerHeight -deviceCantMeetRequest = -9408 #deviceCantMeetRequest -seqGrabInfoNotAvailable = -9407 #seqGrabInfoNotAvailable -badSGChannel = -9406 #badSGChannel -couldntGetRequiredComponent = -9405 #couldntGetRequiredComponent -notEnoughDiskSpaceToGrab = -9404 #notEnoughDiskSpaceToGrab -notEnoughMemoryToGrab = -9403 #notEnoughMemoryToGrab -cantDoThatInCurrentMode = -9402 #cantDoThatInCurrentMode -grabTimeComplete = -9401 #grabTimeComplete -noDeviceForChannel = -9400 #noDeviceForChannel -kNoCardBusCISErr = -9109 #No valid CIS exists for this CardBus card -kNotZVCapableErr = -9108 #This socket does not support Zoomed Video -kCardPowerOffErr = -9107 #Power to the card has been turned off -kAttemptDupCardEntryErr = -9106 #The Enabler was asked to create a duplicate card entry -kAlreadySavedStateErr = -9105 #The state has been saved on previous call -kTooManyIOWindowsErr = -9104 #device requested more than one I/O window -kNotReadyErr = -9103 #PC Card failed to go ready -kClientRequestDenied = -9102 #CS Clients should return this code inorder to -kNoCompatibleNameErr = -9101 #There is no compatible driver name for this device -kNoEnablerForCardErr = -9100 #No Enablers were found that can support the card -kNoCardEnablersFoundErr = -9099 #No Enablers were found -kUnsupportedCardErr = -9098 #Card not supported by generic enabler -kNoClientTableErr = -9097 #The client table has not be initialized yet -kNoMoreInterruptSlotsErr = -9096 #All internal Interrupt slots are in use -kNoMoreTimerClientsErr = -9095 #All timer callbacks are in use -kNoIOWindowRequestedErr = -9094 #Request I/O window before calling configuration -kBadCustomIFIDErr = -9093 #Custom interface ID is invalid -kBadTupleDataErr = -9092 #Data in tuple is invalid -kInvalidCSClientErr = -9091 #Card Services ClientID is not registered -kUnsupportedVsErr = -9090 #Unsupported Voltage Sense -kInvalidDeviceNumber = -9089 #kInvalidDeviceNumber -kPostCardEventErr = -9088 #_PCCSLPostCardEvent failed and dropped an event -kCantConfigureCardErr = -9087 #kCantConfigureCardErr -kPassCallToChainErr = -9086 #kPassCallToChainErr -kCardBusCardErr = -9085 #kCardBusCardErr -k16BitCardErr = -9084 #k16BitCardErr -kBadDeviceErr = -9083 #kBadDeviceErr -kBadLinkErr = -9082 #kBadLinkErr -kInvalidRegEntryErr = -9081 #kInvalidRegEntryErr -kNoCardSevicesSocketsErr = -9080 #kNoCardSevicesSocketsErr -kOutOfResourceErr = -9079 #Card Services has exhausted the resource -kNoMoreItemsErr = -9078 #there are no more of the requested item -kInUseErr = -9077 #requested resource is being used by a client -kConfigurationLockedErr = -9076 #a configuration has already been locked -kWriteProtectedErr = -9075 #media is write-protected -kBusyErr = -9074 #unable to process request at this time - try later -kUnsupportedModeErr = -9073 #mode is not supported -kUnsupportedFunctionErr = -9072 #function is not supported by this implementation -kNoCardErr = -9071 #no PC card in the socket -kGeneralFailureErr = -9070 #an undefined error has occurred -kWriteFailureErr = -9069 #unable to complete write request -kReadFailureErr = -9068 #unable to complete read request -kBadSpeedErr = -9067 #specified speed is unavailable -kBadCISErr = -9066 #CIS on card is invalid -kBadHandleErr = -9065 #clientHandle is invalid -kBadArgsErr = -9064 #values in argument packet are invalid -kBadArgLengthErr = -9063 #ArgLength argument is invalid -kBadWindowErr = -9062 #specified window is invalid -kBadVppErr = -9061 #specified Vpp1 or Vpp2 power level index is invalid -kBadVccErr = -9060 #specified Vcc power level index is invalid -kBadTypeErr = -9059 #specified window or interface type is invalid -kBadSocketErr = -9058 #specified logical or physical socket number is invalid -kBadSizeErr = -9057 #specified size is invalid -kBadPageErr = -9056 #specified page is invalid -kBadOffsetErr = -9055 #specified PC card memory array offset is invalid -kBadIRQErr = -9054 #specified IRQ level is invalid -kBadEDCErr = -9053 #specified EDC generator specified is invalid -kBadBaseErr = -9052 #specified base system memory address is invalid -kBadAttributeErr = -9051 #specified attributes field value is invalid -kBadAdapterErr = -9050 #invalid adapter number -codecOffscreenFailedPleaseRetryErr = -8992 #codecOffscreenFailedPleaseRetryErr -lockPortBitsWrongGDeviceErr = -8991 #lockPortBitsWrongGDeviceErr -directXObjectAlreadyExists = -8990 #directXObjectAlreadyExists -codecDroppedFrameErr = -8989 #returned from ImageCodecDrawBand -codecOffscreenFailedErr = -8988 #codecOffscreenFailedErr -codecNeedAccessKeyErr = -8987 #codec needs password in order to decompress -codecParameterDialogConfirm = -8986 #codecParameterDialogConfirm -lockPortBitsSurfaceLostErr = -8985 #lockPortBitsSurfaceLostErr -lockPortBitsBadPortErr = -8984 #lockPortBitsBadPortErr -lockPortBitsWindowClippedErr = -8983 #lockPortBitsWindowClippedErr -lockPortBitsWindowResizedErr = -8982 #lockPortBitsWindowResizedErr -lockPortBitsWindowMovedErr = -8981 #lockPortBitsWindowMovedErr -lockPortBitsBadSurfaceErr = -8980 #lockPortBitsBadSurfaceErr -codecNeedToFlushChainErr = -8979 #codecNeedToFlushChainErr -codecDisabledErr = -8978 #codec disabled itself -- pass codecFlagReenable to reset -codecNoMemoryPleaseWaitErr = -8977 #codecNoMemoryPleaseWaitErr -codecNothingToBlitErr = -8976 #codecNothingToBlitErr -codecCantQueueErr = -8975 #codecCantQueueErr -codecCantWhenErr = -8974 #codecCantWhenErr -codecOpenErr = -8973 #codecOpenErr -codecConditionErr = -8972 #codecConditionErr -codecExtensionNotFoundErr = -8971 #codecExtensionNotFoundErr -codecDataVersErr = -8970 #codecDataVersErr -codecBadDataErr = -8969 #codecBadDataErr -codecWouldOffscreenErr = -8968 #codecWouldOffscreenErr -codecAbortErr = -8967 #codecAbortErr -codecSpoolErr = -8966 #codecSpoolErr -codecImageBufErr = -8965 #codecImageBufErr -codecScreenBufErr = -8964 #codecScreenBufErr -codecSizeErr = -8963 #codecSizeErr -codecUnimpErr = -8962 #codecUnimpErr -noCodecErr = -8961 #noCodecErr -codecErr = -8960 #codecErr -kIllegalClockValueErr = -8852 #kIllegalClockValueErr -kUTCOverflowErr = -8851 #kUTCOverflowErr -kUTCUnderflowErr = -8850 #kUTCUnderflowErr -kATSULastErr = -8809 #The last ATSUI error code. -kATSULineBreakInWord = -8808 #This is not an error code but is returned by ATSUBreakLine to -kATSUCoordinateOverflowErr = -8807 #Used to indicate the coordinates provided to an ATSUI routine caused -kATSUNoFontScalerAvailableErr = -8806 #Used when no font scaler is available for the font passed -kATSUNoFontCmapAvailableErr = -8805 #Used when no CMAP table can be accessed or synthesized for the -kATSULowLevelErr = -8804 #Used when an error was encountered within the low level ATS -kATSUQuickDrawTextErr = -8803 #Used when QuickDraw Text encounters an error rendering or measuring -kATSUNoStyleRunsAssignedErr = -8802 #Used when an attempt was made to measure, highlight or draw -kATSUNotSetErr = -8801 #Used when the client attempts to retrieve an attribute, -kATSUInvalidCacheErr = -8800 #Used when an attempt was made to read in style data -kATSUInvalidAttributeTagErr = -8799 #Used when an attempt was made to use a tag value that -kATSUInvalidAttributeSizeErr = -8798 #Used when an attempt was made to use an attribute with a -kATSUInvalidAttributeValueErr = -8797 #Used when an attempt was made to use an attribute with -kATSUInvalidFontErr = -8796 #Used when an attempt was made to use an invalid font ID. -kATSUNoCorrespondingFontErr = -8795 #This value is retrned by font ID conversion -kATSUFontsNotMatched = -8794 #This value is returned by ATSUMatchFontsToText() -kATSUFontsMatched = -8793 #This is not an error code but is returned by -kATSUInvalidTextRangeErr = -8792 #An attempt was made to extract information -kATSUInvalidStyleErr = -8791 #An attempt was made to use a ATSUStyle which -kATSUInvalidTextLayoutErr = -8790 #An attempt was made to use a ATSUTextLayout -kTECOutputBufferFullStatus = -8785 #output buffer has no room for conversion of next input text element (partial conversion) -kTECNeedFlushStatus = -8784 #kTECNeedFlushStatus -kTECUsedFallbacksStatus = -8783 #kTECUsedFallbacksStatus -kTECItemUnavailableErr = -8771 #item (e.g. name) not available for specified region (& encoding if relevant) -kTECGlobalsUnavailableErr = -8770 #globals have already been deallocated (premature TERM) -unicodeChecksumErr = -8769 #unicodeChecksumErr -unicodeNoTableErr = -8768 #unicodeNoTableErr -unicodeVariantErr = -8767 #unicodeVariantErr -unicodeFallbacksErr = -8766 #unicodeFallbacksErr -unicodePartConvertErr = -8765 #unicodePartConvertErr -unicodeBufErr = -8764 #unicodeBufErr -unicodeCharErr = -8763 #unicodeCharErr -unicodeElementErr = -8762 #unicodeElementErr -unicodeNotFoundErr = -8761 #unicodeNotFoundErr -unicodeTableFormatErr = -8760 #unicodeTableFormatErr -unicodeDirectionErr = -8759 #unicodeDirectionErr -unicodeContextualErr = -8758 #unicodeContextualErr -unicodeTextEncodingDataErr = -8757 #unicodeTextEncodingDataErr -kTECDirectionErr = -8756 #direction stack overflow, etc. -kTECIncompleteElementErr = -8755 #text element may be incomplete or is too long for internal buffers -kTECUnmappableElementErr = -8754 #kTECUnmappableElementErr -kTECPartialCharErr = -8753 #input buffer ends in the middle of a multibyte character, conversion stopped -kTECBadTextRunErr = -8752 #kTECBadTextRunErr -kTECArrayFullErr = -8751 #supplied name buffer or TextRun, TextEncoding, or UnicodeMapping array is too small -kTECBufferBelowMinimumSizeErr = -8750 #output buffer too small to allow processing of first input text element -kTECNoConversionPathErr = -8749 #kTECNoConversionPathErr -kTECCorruptConverterErr = -8748 #invalid converter object reference -kTECTableFormatErr = -8747 #kTECTableFormatErr -kTECTableChecksumErr = -8746 #kTECTableChecksumErr -kTECMissingTableErr = -8745 #kTECMissingTableErr -kTextUndefinedElementErr = -8740 #text conversion errors -kTextMalformedInputErr = -8739 #in DBCS, for example, high byte followed by invalid low byte -kTextUnsupportedEncodingErr = -8738 #specified encoding not supported for this operation -kRANotEnabled = -7139 #kRANotEnabled -kRACallBackFailed = -7138 #kRACallBackFailed -kRADuplicateIPAddr = -7137 #kRADuplicateIPAddr -kRANCPRejectedbyPeer = -7136 #kRANCPRejectedbyPeer -kRAExtAuthenticationFailed = -7135 #kRAExtAuthenticationFailed -kRAATalkInactive = -7134 #kRAATalkInactive -kRAPeerNotResponding = -7133 #kRAPeerNotResponding -kRAPPPPeerDisconnected = -7132 #kRAPPPPeerDisconnected -kRAPPPUserDisconnected = -7131 #kRAPPPUserDisconnected -kRAPPPNegotiationFailed = -7130 #kRAPPPNegotiationFailed -kRAPPPAuthenticationFailed = -7129 #kRAPPPAuthenticationFailed -kRAPPPProtocolRejected = -7128 #kRAPPPProtocolRejected -dcmBufferOverflowErr = -7127 #data is larger than buffer size -kRANotPrimaryInterface = -7126 #when IPCP is not primary TCP/IP intf. -kRATCPIPNotConfigured = -7125 #TCP/IP not configured, could be loaded -kRATCPIPInactive = -7124 #TCP/IP inactive, cannot be loaded -kRARemoteAccessNotReady = -7123 #kRARemoteAccessNotReady -kRAInitOpenTransportFailed = -7122 #kRAInitOpenTransportFailed -dcmProtectedErr = -7121 #need keyword to use dictionary -kRAUserPwdEntryRequired = -7120 #kRAUserPwdEntryRequired -kRAUserPwdChangeRequired = -7119 #kRAUserPwdChangeRequired -dcmBadFindMethodErr = -7118 #no such find method supported -kRAInvalidSerialProtocol = -7117 #kRAInvalidSerialProtocol -kRAInvalidPortState = -7116 #kRAInvalidPortState -dcmBadKeyErr = -7115 #bad key information -kRAPortBusy = -7114 #kRAPortBusy -kRAInstallationDamaged = -7113 #kRAInstallationDamaged -dcmBadFieldTypeErr = -7112 #no such field type supported -dcmBadFieldInfoErr = -7111 #incomplete information -dcmNecessaryFieldErr = -7110 #lack required/identify field -dcmDupRecordErr = -7109 #same record already exist -kRANotConnected = -7108 #kRANotConnected -dcmBlockFullErr = -7107 #dictionary block full -kRAMissingResources = -7106 #kRAMissingResources -dcmDictionaryBusyErr = -7105 #dictionary is busy -dcmDictionaryNotOpenErr = -7104 #dictionary not opened -dcmPermissionErr = -7103 #invalid permission -dcmBadDictionaryErr = -7102 #invalid dictionary -dcmNotDictionaryErr = -7101 #not dictionary -kRAInvalidParameter = -7100 #kRAInvalidParameter -laEngineNotFoundErr = -7000 #can't find the engine -laPropertyErr = -6999 #Error in properties -kUSBUnknownDeviceErr = -6998 #device ref not recognised -laPropertyIsReadOnlyErr = -6997 #the property is read only -laPropertyUnknownErr = -6996 #the property is unknown to this environment -laPropertyValueErr = -6995 #Invalid property value -laDictionaryTooManyErr = -6994 #too many dictionaries -laDictionaryUnknownErr = -6993 #can't use this dictionary with this environment -laDictionaryNotOpenedErr = -6992 #the dictionary is not opened -laTextOverFlowErr = -6991 #text is too long -laFailAnalysisErr = -6990 #analysis failed -laNoMoreMorphemeErr = -6989 #nothing to read -laInvalidPathErr = -6988 #path is not correct -kUSBNotHandled = -6987 #Notification was not handled (same as NotFound) -laEnvironmentNotFoundErr = -6986 #can't fint the specified environment -laEnvironmentBusyErr = -6985 #specified environment is used -laTooSmallBufferErr = -6984 #output buffer is too small to store any result -kUSBFlagsError = -6983 #Unused flags not zeroed -kUSBAbortedError = -6982 #Pipe aborted -kUSBNoBandwidthError = -6981 #Not enough bandwidth available -kUSBPipeIdleError = -6980 #Pipe is Idle, it will not accept transactions -kUSBPipeStalledError = -6979 #Pipe has stalled, error needs to be cleared -kUSBUnknownInterfaceErr = -6978 #Interface ref not recognised -kUSBDeviceBusy = -6977 #Device is already being configured -kUSBDevicePowerProblem = -6976 #Device has a power problem -kUSBInvalidBuffer = -6975 #bad buffer, usually nil -kUSBDeviceSuspended = -6974 #Device is suspended -kUSBDeviceNotSuspended = -6973 #device is not suspended for resume -kUSBDeviceDisconnected = -6972 #Disconnected during suspend or reset -kUSBTimedOut = -6971 #Transaction timed out. -kUSBQueueAborted = -6970 #Pipe zero stall cleared. -kUSBPortDisabled = -6969 #The port you are attached to is disabled, use USBDeviceReset. -kUSBBadDispatchTable = -6950 #Improper driver dispatch table -kUSBUnknownNotification = -6949 #Notification type not defined -kUSBQueueFull = -6948 #Internal queue maxxed -kUSBLinkErr = -6916 #kUSBLinkErr -kUSBCRCErr = -6915 #Pipe stall, bad CRC -kUSBBitstufErr = -6914 #Pipe stall, bitstuffing -kUSBDataToggleErr = -6913 #Pipe stall, Bad data toggle -kUSBEndpointStallErr = -6912 #Device didn't understand -kUSBNotRespondingErr = -6911 #Pipe stall, No device, device hung -kUSBPIDCheckErr = -6910 #Pipe stall, PID CRC error -kUSBWrongPIDErr = -6909 #Pipe stall, Bad or wrong PID -kUSBOverRunErr = -6908 #Packet too large or more data than buffer -kUSBUnderRunErr = -6907 #Less data than buffer -kUSBRes1Err = -6906 #kUSBRes1Err -kUSBRes2Err = -6905 #kUSBRes2Err -kUSBBufOvrRunErr = -6904 #Host hardware failure on data in, PCI busy? -kUSBBufUnderRunErr = -6903 #Host hardware failure on data out, PCI busy? -kUSBNotSent1Err = -6902 #Transaction not sent -kUSBNotSent2Err = -6901 #Transaction not sent -kDMFoundErr = -6232 #Did not proceed because we found an item -kDMMainDisplayCannotMoveErr = -6231 #Trying to move main display (or a display mirrored to it) -kDMDisplayAlreadyInstalledErr = -6230 #Attempt to add an already installed display. -kDMDisplayNotFoundErr = -6229 #Could not find item (will someday remove). -kDMDriverNotDisplayMgrAwareErr = -6228 #Video Driver does not support display manager. -kDMSWNotInitializedErr = -6227 #Required software not initialized (eg windowmanager or display mgr). -kSysSWTooOld = -6226 #Missing critical pieces of System Software. -kDMMirroringNotOn = -6225 #Returned by all calls that need mirroring to be on to do their thing. -kDMCantBlock = -6224 #Mirroring is already on, canÕt Block now (call DMUnMirror() first). -kDMMirroringBlocked = -6223 #DMBlockMirroring() has been called. -kDMWrongNumberOfDisplays = -6222 #Can only handle 2 displays for now. -kDMMirroringOnAlready = -6221 #Returned by all calls that need mirroring to be off to do their thing. -kDMGenErr = -6220 #Unexpected Error -kQTSSUnknownErr = -6150 #kQTSSUnknownErr -collectionVersionErr = -5753 #collectionVersionErr -collectionIndexRangeErr = -5752 #collectionIndexRangeErr -collectionItemNotFoundErr = -5751 #collectionItemNotFoundErr -collectionItemLockedErr = -5750 #collectionItemLockedErr -kNavMissingKindStringErr = -5699 #kNavMissingKindStringErr -kNavInvalidCustomControlMessageErr = -5698 #kNavInvalidCustomControlMessageErr -kNavCustomControlMessageFailedErr = -5697 #kNavCustomControlMessageFailedErr -kNavInvalidSystemConfigErr = -5696 #kNavInvalidSystemConfigErr -kNavWrongDialogClassErr = -5695 #kNavWrongDialogClassErr -kNavWrongDialogStateErr = -5694 #kNavWrongDialogStateErr -dialogNoTimeoutErr = -5640 #dialogNoTimeoutErr -menuInvalidErr = -5623 #menu is invalid -menuItemNotFoundErr = -5622 #specified menu item wasn't found -menuUsesSystemDefErr = -5621 #GetMenuDefinition failed because the menu uses the system MDEF -menuNotFoundErr = -5620 #specified menu or menu ID wasn't found -windowWrongStateErr = -5615 #window is not in a state that is valid for the current action -windowManagerInternalErr = -5614 #something really weird happened inside the window manager -windowAttributesConflictErr = -5613 #passed some attributes that are mutually exclusive -windowAttributeImmutableErr = -5612 #tried to change attributes which can't be changed -errWindowDoesNotFitOnscreen = -5611 #ConstrainWindowToScreen could not make the window fit onscreen -errWindowNotFound = -5610 #returned from FindWindowOfClass -errFloatingWindowsNotInitialized = -5609 #called HideFloatingWindows or ShowFloatingWindows without calling InitFloatingWindows -errWindowsAlreadyInitialized = -5608 #tried to call InitFloatingWindows twice, or called InitWindows and then floating windows -errUserWantsToDragWindow = -5607 #if returned from TrackWindowProxyDrag, you should call DragWindow on the window -errCorruptWindowDescription = -5606 #tried to load a corrupt window description (size or version fields incorrect) -errUnrecognizedWindowClass = -5605 #tried to create a window with a bad WindowClass -errWindowPropertyNotFound = -5604 #tried to get a nonexistent property -errInvalidWindowProperty = -5603 #tried to access a property tag with private creator -errWindowDoesNotHaveProxy = -5602 #tried to do something requiring a proxy to a window which doesnÕt have a proxy -errUnsupportedWindowAttributesForClass = -5601 #tried to create a window with WindowAttributes not supported by the WindowClass -errInvalidWindowPtr = -5600 #tried to pass a bad WindowRef argument -gestaltLocationErr = -5553 #gestalt function ptr wasn't in sysheap -gestaltDupSelectorErr = -5552 #tried to add an entry that already existed -gestaltUndefSelectorErr = -5551 #undefined selector was passed to Gestalt -gestaltUnknownErr = -5550 #value returned if Gestalt doesn't know the answer -envVersTooBig = -5502 #Version bigger than call can handle -envBadVers = -5501 #Version non-positive -envNotPresent = -5500 #returned by glue. -qtsAddressBusyErr = -5421 #qtsAddressBusyErr -qtsConnectionFailedErr = -5420 #qtsConnectionFailedErr -qtsTimeoutErr = -5408 #qtsTimeoutErr -qtsUnknownValueErr = -5407 #qtsUnknownValueErr -qtsTooMuchDataErr = -5406 #qtsTooMuchDataErr -qtsUnsupportedFeatureErr = -5405 #qtsUnsupportedFeatureErr -qtsUnsupportedRateErr = -5404 #qtsUnsupportedRateErr -qtsUnsupportedDataTypeErr = -5403 #qtsUnsupportedDataTypeErr -qtsBadDataErr = -5402 #something is wrong with the data -qtsBadStateErr = -5401 #qtsBadStateErr -qtsBadSelectorErr = -5400 #qtsBadSelectorErr -errIAEndOfTextRun = -5388 #errIAEndOfTextRun -errIATextExtractionErr = -5387 #errIATextExtractionErr -errIAInvalidDocument = -5386 #errIAInvalidDocument -errIACanceled = -5385 #errIACanceled -errIABufferTooSmall = -5384 #errIABufferTooSmall -errIANoMoreItems = -5383 #errIANoMoreItems -errIAParamErr = -5382 #errIAParamErr -errIAAllocationErr = -5381 #errIAAllocationErr -errIAUnknownErr = -5380 #errIAUnknownErr -hrURLNotHandledErr = -5363 #hrURLNotHandledErr -hrUnableToResizeHandleErr = -5362 #hrUnableToResizeHandleErr -hrMiscellaneousExceptionErr = -5361 #hrMiscellaneousExceptionErr -hrHTMLRenderingLibNotInstalledErr = -5360 #hrHTMLRenderingLibNotInstalledErr -errCannotUndo = -5253 #errCannotUndo -errNonContiuousAttribute = -5252 #errNonContiuousAttribute -errUnknownElement = -5251 #errUnknownElement -errReadOnlyText = -5250 #errReadOnlyText -errEmptyScrap = -5249 #errEmptyScrap -errNoHiliteText = -5248 #errNoHiliteText -errOffsetNotOnElementBounday = -5247 #errOffsetNotOnElementBounday -errInvalidRange = -5246 #errInvalidRange -errIteratorReachedEnd = -5245 #errIteratorReachedEnd -errEngineNotFound = -5244 #errEngineNotFound -errAlreadyInImagingMode = -5243 #errAlreadyInImagingMode -errNotInImagingMode = -5242 #errNotInImagingMode -errMarginWilllNotFit = -5241 #errMarginWilllNotFit -errUnknownAttributeTag = -5240 #errUnknownAttributeTag -afpSameNodeErr = -5063 #An Attempt was made to connect to a file server running on the same machine -afpAlreadyMounted = -5062 #The volume is already mounted -afpCantMountMoreSrvre = -5061 #The Maximum number of server connections has been reached -afpBadDirIDType = -5060 #afpBadDirIDType -afpCallNotAllowed = -5048 #The server knows what you wanted to do, but won't let you do it just now -afpAlreadyLoggedInErr = -5047 #User has been authenticated but is already logged in from another machine (and that's not allowed on this server) -afpPwdPolicyErr = -5046 #Password does not conform to servers password policy -afpPwdNeedsChangeErr = -5045 #The password needs to be changed -afpInsideTrashErr = -5044 #The folder being shared is inside the trash folder OR the shared folder is being moved into the trash folder -afpInsideSharedErr = -5043 #The folder being shared is inside a shared folder OR the folder contains a shared folder and is being moved into a shared folder -afpPwdExpiredErr = -5042 #The password being used is too old: this requires the user to change the password before log-in can continue -afpPwdTooShortErr = -5041 #The password being set is too short: there is a minimum length that must be met or exceeded -afpPwdSameErr = -5040 #Someone tried to change their password to the same password on a mantadory password change -afpBadIDErr = -5039 #afpBadIDErr -afpSameObjectErr = -5038 #afpSameObjectErr -afpCatalogChanged = -5037 #afpCatalogChanged -afpDiffVolErr = -5036 #afpDiffVolErr -afpIDExists = -5035 #afpIDExists -afpIDNotFound = -5034 #afpIDNotFound -afpContainsSharedErr = -5033 #the folder being shared contains a shared folder -afpObjectLocked = -5032 #Object is M/R/D/W inhibited -afpVolLocked = -5031 #Volume is Read-Only -afpIconTypeError = -5030 #Icon size specified different from existing icon size -afpDirNotFound = -5029 #Unknown directory specified -afpCantRename = -5028 #AFPRename cannot rename volume -afpServerGoingDown = -5027 #Server is shutting down -afpTooManyFilesOpen = -5026 #Maximum open file count reached -afpObjectTypeErr = -5025 #File/Directory specified where Directory/File expected -afpCallNotSupported = -5024 #Unsupported AFP call was made -afpUserNotAuth = -5023 #No AFPLogin call has successfully been made for this session -afpSessClosed = -5022 #Session closed -afpRangeOverlap = -5021 #Some or all of range already locked by same user -afpRangeNotLocked = -5020 #Tried to unlock range that was not locked by user -afpParmErr = -5019 #A specified parameter was out of allowable range -afpObjectNotFound = -5018 #Specified file or directory does not exist -afpObjectExists = -5017 #Specified destination file or directory already exists -afpNoServer = -5016 #Server not responding -afpNoMoreLocks = -5015 #Maximum lock limit reached -afpMiscErr = -5014 #Unexpected error encountered during execution -afpLockErr = -5013 #Some or all of requested range is locked by another user -afpItemNotFound = -5012 #Unknown UserName/UserID or missing comment/APPL entry -afpFlatVol = -5011 #Cannot create directory on specified volume -afpFileBusy = -5010 #Cannot delete an open file -afpEofError = -5009 #Read beyond logical end-of-file -afpDiskFull = -5008 #Insufficient free space on volume for operation -afpDirNotEmpty = -5007 #Cannot delete non-empty directory -afpDenyConflict = -5006 #Specified open/deny modes conflict with current open modes -afpCantMove = -5005 #Move destination is offspring of source, or root was specified -afpBitmapErr = -5004 #Bitmap contained bits undefined for call -afpBadVersNum = -5003 #Unknown AFP protocol version number specified -afpBadUAM = -5002 #Unknown user authentication method specified -afpAuthContinue = -5001 #Further information required to complete AFPLogin call -afpAccessDenied = -5000 #Insufficient access privileges for operation -illegalScrapFlavorSizeErr = -4999 #illegalScrapFlavorSizeErr -illegalScrapFlavorTypeErr = -4998 #illegalScrapFlavorTypeErr -illegalScrapFlavorFlagsErr = -4997 #illegalScrapFlavorFlagsErr -scrapFlavorSizeMismatchErr = -4996 #scrapFlavorSizeMismatchErr -scrapFlavorFlagsMismatchErr = -4995 #scrapFlavorFlagsMismatchErr -nilScrapFlavorDataErr = -4994 #nilScrapFlavorDataErr -noScrapPromiseKeeperErr = -4993 #noScrapPromiseKeeperErr -scrapPromiseNotKeptErr = -4992 #scrapPromiseNotKeptErr -processStateIncorrectErr = -4991 #processStateIncorrectErr -badScrapRefErr = -4990 #badScrapRefErr -duplicateScrapFlavorErr = -4989 #duplicateScrapFlavorErr -internalScrapErr = -4988 #internalScrapErr -coreFoundationUnknownErr = -4960 #coreFoundationUnknownErr -badRoutingSizeErr = -4276 #badRoutingSizeErr -routingNotFoundErr = -4275 #routingNotFoundErr -duplicateRoutingErr = -4274 #duplicateRoutingErr -invalidFolderTypeErr = -4273 #invalidFolderTypeErr -noMoreFolderDescErr = -4272 #noMoreFolderDescErr -duplicateFolderDescErr = -4271 #duplicateFolderDescErr -badFolderDescErr = -4270 #badFolderDescErr -cmCantGamutCheckError = -4217 #Gammut checking not supported by this ColorWorld -cmNamedColorNotFound = -4216 #NamedColor not found -cmCantCopyModifiedV1Profile = -4215 #Illegal to copy version 1 profiles that have been modified -cmRangeOverFlow = -4214 #Color conversion warning that some output color values over/underflowed and were clipped -cmInvalidProfileComment = -4213 #Bad Profile comment during drawpicture -cmNoGDevicesError = -4212 #Begin/End Matching -- no gdevices available -cmInvalidDstMap = -4211 #Destination pix/bit map was invalid -cmInvalidSrcMap = -4210 #Source pix/bit map was invalid -cmInvalidColorSpace = -4209 #Profile colorspace does not match bitmap type -cmErrIncompatibleProfile = -4208 #Other ColorSync Errors -cmSearchError = -4207 #cmSearchError -cmInvalidSearch = -4206 #Bad Search Handle -cmInvalidProfileLocation = -4205 #Operation not supported for this profile location -cmInvalidProfile = -4204 #A Profile must contain a 'cs1 ' tag to be valid -cmFatalProfileErr = -4203 #cmFatalProfileErr -cmCantDeleteElement = -4202 #cmCantDeleteElement -cmIndexRangeErr = -4201 #Tag index out of range -kNSLInitializationFailed = -4200 #UNABLE TO INITIALIZE THE MANAGER!!!!! DO NOT CONTINUE!!!! -kNSLNotInitialized = -4199 #kNSLNotInitialized -kNSLInsufficientSysVer = -4198 #kNSLInsufficientSysVer -kNSLInsufficientOTVer = -4197 #kNSLInsufficientOTVer -kNSLNoElementsInList = -4196 #kNSLNoElementsInList -kNSLBadReferenceErr = -4195 #kNSLBadReferenceErr -kNSLBadServiceTypeErr = -4194 #kNSLBadServiceTypeErr -kNSLBadDataTypeErr = -4193 #kNSLBadDataTypeErr -kNSLBadNetConnection = -4192 #kNSLBadNetConnection -kNSLNoSupportForService = -4191 #kNSLNoSupportForService -kNSLInvalidPluginSpec = -4190 #kNSLInvalidPluginSpec -kNSLRequestBufferAlreadyInList = -4189 #kNSLRequestBufferAlreadyInList -kNSLNoContextAvailable = -4188 #(ContinueLookup function ptr invalid) -kNSLBufferTooSmallForData = -4187 #(Client buffer too small for data from plugin) -kNSLCannotContinueLookup = -4186 #(Can't continue lookup; error or bad state) -kNSLBadClientInfoPtr = -4185 #(nil ClientAsyncInfoPtr; no reference available) -kNSLNullListPtr = -4184 #(client is trying to add items to a nil list) -kNSLBadProtocolTypeErr = -4183 #(client is trying to add a null protocol type) -kNSLPluginLoadFailed = -4182 #(manager unable to load one of the plugins) -kNSLNoPluginsFound = -4181 #(manager didn't find any valid plugins to load) -kNSLSearchAlreadyInProgress = -4180 #(you can only have one ongoing search per clientRef) -kNSLNoPluginsForSearch = -4179 #(no plugins will respond to search request; bad protocol(s)?) -kNSLNullNeighborhoodPtr = -4178 #(client passed a null neighborhood ptr) -kNSLSomePluginsFailedToLoad = -4177 #(one or more plugins failed to load, but at least one did load; this error isn't fatal) -kNSLErrNullPtrError = -4176 #kNSLErrNullPtrError -kNSLNotImplementedYet = -4175 #kNSLNotImplementedYet -kNSLUILibraryNotAvailable = -4174 #The NSL UI Library needs to be in the Extensions Folder -kNSLNoCarbonLib = -4173 #kNSLNoCarbonLib -kNSLBadURLSyntax = -4172 #URL contains illegal characters -kNSLSchedulerError = -4171 #A custom thread routine encountered an error -kNSL68kContextNotSupported = -4170 #no 68k allowed -noHelpForItem = -4009 #noHelpForItem -badProfileError = -4008 #badProfileError -colorSyncNotInstalled = -4007 #colorSyncNotInstalled -pickerCantLive = -4006 #pickerCantLive -cantLoadPackage = -4005 #cantLoadPackage -cantCreatePickerWindow = -4004 #cantCreatePickerWindow -cantLoadPicker = -4003 #cantLoadPicker -pickerResourceError = -4002 #pickerResourceError -requiredFlagsDontMatch = -4001 #requiredFlagsDontMatch -firstPickerError = -4000 #firstPickerError -kOTPortLostConnection = -3285 # -kOTUserRequestedErr = -3284 # -kOTConfigurationChangedErr = -3283 # -kOTBadConfigurationErr = -3282 # -kOTPortWasEjectedErr = -3281 # -kOTPortHasDiedErr = -3280 # -kOTClientNotInittedErr = -3279 # -kENOMSGErr = -3278 # -kESRCHErr = -3277 # -kEINPROGRESSErr = -3276 # -kENODATAErr = -3275 # -kENOSTRErr = -3274 # -kECANCELErr = -3273 # -kEBADMSGErr = -3272 # -kENOSRErr = -3271 # -kETIMEErr = -3270 # -kEPROTOErr = -3269 #‚‚‚ fill out missing codes ‚‚‚ -kEHOSTUNREACHErr = -3264 #No route to host -kEHOSTDOWNErr = -3263 #Host is down -kECONNREFUSEDErr = -3260 #Connection refused -kETIMEDOUTErr = -3259 #Connection timed out -kETOOMANYREFSErr = -3258 #Too many references: can't splice -kESHUTDOWNErr = -3257 #Can't send after socket shutdown -kENOTCONNErr = -3256 #Socket is not connected -kEISCONNErr = -3255 #Socket is already connected -kENOBUFSErr = -3254 #No buffer space available -kECONNRESETErr = -3253 #Connection reset by peer -kECONNABORTEDErr = -3252 #Software caused connection abort -kENETRESETErr = -3251 #Network dropped connection on reset -kENETUNREACHErr = -3250 #Network is unreachable -kENETDOWNErr = -3249 #Network is down -kEADDRNOTAVAILErr = -3248 #Can't assign requested address -kEADDRINUSEErr = -3247 #Address already in use -kEOPNOTSUPPErr = -3244 #Operation not supported on socket -kESOCKTNOSUPPORTErr = -3243 #Socket type not supported -kEPROTONOSUPPORTErr = -3242 #Protocol not supported -kENOPROTOOPTErr = -3241 #Protocol not available -kEPROTOTYPEErr = -3240 #Protocol wrong type for socket -kEMSGSIZEErr = -3239 #Message too long -kEDESTADDRREQErr = -3238 #Destination address required -kENOTSOCKErr = -3237 #Socket operation on non-socket -kEALREADYErr = -3236 # -kEWOULDBLOCKErr = -3234 #Call would block, so was aborted -kERANGEErr = -3233 #Message size too large for STREAM -kEPIPEErr = -3231 #Broken pipe -kENOTTYErr = -3224 #Not a character device -kEINVALErr = -3221 #Invalid argument -kENODEVErr = -3218 #No such device -kOTDuplicateFoundErr = -3216 #OT generic duplicate found error -kEBUSYErr = -3215 #Device or resource busy -kEFAULTErr = -3213 #Bad address -kEACCESErr = -3212 #Permission denied -kOTOutOfMemoryErr = -3211 #OT ran out of memory, may be a temporary -kEAGAINErr = -3210 #Try operation again later -kEBADFErr = -3208 #Bad file number -kENXIOErr = -3205 #No such device or address -kEIOErr = -3204 #I/O error -kEINTRErr = -3203 #Interrupted system service -kENORSRCErr = -3202 #No such resource -kOTNotFoundErr = -3201 #OT generic not found error -kEPERMErr = -3200 #Permission denied -kOTCanceledErr = -3180 #XTI2OSStatus(TCANCELED) The command was cancelled -kOTBadSyncErr = -3179 #XTI2OSStatus(TBADSYNC) A synchronous call at interrupt time -kOTProtocolErr = -3178 #XTI2OSStatus(TPROTO) An unspecified provider error occurred -kOTQFullErr = -3177 #XTI2OSStatus(TQFULL) -kOTResAddressErr = -3176 #XTI2OSStatus(TRESADDR) -kOTResQLenErr = -3175 #XTI2OSStatus(TRESQLEN) -kOTProviderMismatchErr = -3174 #XTI2OSStatus(TPROVMISMATCH) Tried to accept on incompatible endpoint -kOTIndOutErr = -3173 #XTI2OSStatus(TINDOUT) Accept failed because of pending listen -kOTAddressBusyErr = -3172 #XTI2OSStatus(TADDRBUSY) Address requested is already in use -kOTBadQLenErr = -3171 #XTI2OSStatus(TBADQLEN) A Bind to an in-use addr with qlen > 0 -kOTBadNameErr = -3170 #XTI2OSStatus(TBADNAME) A bad endpoint name was supplied -kOTNoStructureTypeErr = -3169 #XTI2OSStatus(TNOSTRUCTYPE) Bad structure type requested for OTAlloc -kOTStateChangeErr = -3168 #XTI2OSStatus(TSTATECHNG) State is changing - try again later -kOTNotSupportedErr = -3167 #XTI2OSStatus(TNOTSUPPORT) Command is not supported -kOTNoReleaseErr = -3166 #XTI2OSStatus(TNOREL) No orderly release indication available -kOTBadFlagErr = -3165 #XTI2OSStatus(TBADFLAG) A Bad flag value was supplied -kOTNoUDErrErr = -3164 #XTI2OSStatus(TNOUDERR) No Unit Data Error indication available -kOTNoDisconnectErr = -3163 #XTI2OSStatus(TNODIS) No disconnect indication available -kOTNoDataErr = -3162 #XTI2OSStatus(TNODATA) No data available for reading -kOTFlowErr = -3161 #XTI2OSStatus(TFLOW) Provider is flow-controlled -kOTBufferOverflowErr = -3160 #XTI2OSStatus(TBUFOVFLW) Passed buffer not big enough -kOTBadDataErr = -3159 #XTI2OSStatus(TBADDATA) An illegal amount of data was specified -kOTLookErr = -3158 #XTI2OSStatus(TLOOK) An event occurred - call Look() -kOTSysErrorErr = -3157 #XTI2OSStatus(TSYSERR) A system error occurred -kOTBadSequenceErr = -3156 #XTI2OSStatus(TBADSEQ) Sequence specified does not exist -kOTOutStateErr = -3155 #XTI2OSStatus(TOUTSTATE) Call issued in wrong state -kOTNoAddressErr = -3154 #XTI2OSStatus(TNOADDR) No address was specified -kOTBadReferenceErr = -3153 #XTI2OSStatus(TBADF) Bad provider reference -kOTAccessErr = -3152 #XTI2OSStatus(TACCES) Missing access permission -kOTBadOptionErr = -3151 #XTI2OSStatus(TBADOPT) A Bad option was specified -kOTBadAddressErr = -3150 #XTI2OSStatus(TBADADDR) A Bad address was specified -sktClosedErr = -3109 #sktClosedErr -recNotFnd = -3108 #recNotFnd -atpBadRsp = -3107 #atpBadRsp -atpLenErr = -3106 #atpLenErr -readQErr = -3105 #readQErr -extractErr = -3104 #extractErr -ckSumErr = -3103 #ckSumErr -noMPPErr = -3102 #noMPPErr -buf2SmallErr = -3101 #buf2SmallErr -noPrefAppErr = -3032 #noPrefAppErr -badTranslationSpecErr = -3031 #badTranslationSpecErr -noTranslationPathErr = -3030 #noTranslationPathErr -couldNotParseSourceFileErr = -3026 #Source document does not contain source type -invalidTranslationPathErr = -3025 #Source type to destination type not a valid path -retryComponentRegistrationErr = -3005 #retryComponentRegistrationErr -unresolvedComponentDLLErr = -3004 #unresolvedComponentDLLErr -componentDontRegister = -3003 #componentDontRegister -componentNotCaptured = -3002 #componentNotCaptured -validInstancesExist = -3001 #validInstancesExist -invalidComponentID = -3000 #invalidComponentID -cfragLastErrCode = -2899 #The last value in the range of CFM errors. -cfragOutputLengthErr = -2831 #An output parameter is too small to hold the value. -cfragAbortClosureErr = -2830 #Used by notification handlers to abort a closure. -cfragClosureIDErr = -2829 #The closure ID was not valid. -cfragContainerIDErr = -2828 #The fragment container ID was not valid. -cfragNoRegistrationErr = -2827 #The registration name was not found. -cfragNotClosureErr = -2826 #The closure ID was actually a connection ID. -cfragFileSizeErr = -2825 #A file was too large to be mapped. -cfragFragmentUsageErr = -2824 #A semantic error in usage of the fragment. -cfragArchitectureErr = -2823 #A fragment has an unacceptable architecture. -cfragNoApplicationErr = -2822 #No application member found in the cfrg resource. -cfragInitFunctionErr = -2821 #A fragment's initialization routine returned an error. -cfragFragmentCorruptErr = -2820 #A fragment's container was corrupt (known format). -cfragCFMInternalErr = -2819 #An internal inconstistancy has been detected. -cfragCFMStartupErr = -2818 #Internal error during CFM initialization. -cfragLibConnErr = -2817 # -cfragInitAtBootErr = -2816 #A boot library has an initialization function. (System 7 only) -cfragInitLoopErr = -2815 #Circularity in required initialization order. -cfragImportTooNewErr = -2814 #An import library was too new for a client. -cfragImportTooOldErr = -2813 #An import library was too old for a client. -cfragInitOrderErr = -2812 # -cfragNoIDsErr = -2811 #No more CFM IDs for contexts, connections, etc. -cfragNoClientMemErr = -2810 #Out of memory for fragment mapping or section instances. -cfragNoPrivateMemErr = -2809 #Out of memory for internal bookkeeping. -cfragNoPositionErr = -2808 #The registration insertion point was not found. -cfragUnresolvedErr = -2807 #A fragment had "hard" unresolved imports. -cfragFragmentFormatErr = -2806 #A fragment's container format is unknown. -cfragDupRegistrationErr = -2805 #The registration name was already in use. -cfragNoLibraryErr = -2804 #The named library was not found. -cfragNoSectionErr = -2803 #The specified section was not found. -cfragNoSymbolErr = -2802 #The specified symbol was not found. -cfragConnectionIDErr = -2801 #The connection ID was not valid. -cfragFirstErrCode = -2800 #The first value in the range of CFM errors. -errASInconsistentNames = -2780 #English errors: -errASNoResultReturned = -2763 #The range -2780 thru -2799 is reserved for dialect specific error codes. (Error codes from different dialects may overlap.) -errASParameterNotForEvent = -2762 #errASParameterNotForEvent -errASIllegalFormalParameter = -2761 #errASIllegalFormalParameter -errASTerminologyNestingTooDeep = -2760 #errASTerminologyNestingTooDeep -OSAControlFlowError = -2755 #Signaled when illegal control flow occurs in an application (no catcher for throw, non-lexical loop exit, etc.) -OSAInconsistentDeclarations = -2754 #Signaled when a variable is declared inconsistently in the same scope, such as both local and global -OSAUndefinedVariable = -2753 #Signaled when a variable is accessed that has no value -OSADuplicateHandler = -2752 #Signaled when more than one handler is defined with the same name in a scope where the language doesn't allow it -OSADuplicateProperty = -2751 #Signaled when a formal parameter, local variable, or instance variable is specified more than once. -OSADuplicateParameter = -2750 #Signaled when a formal parameter, local variable, or instance variable is specified more than once -OSATokenTooLong = -2742 #Signaled when a name or number is too long to be parsed -OSASyntaxTypeError = -2741 #Signaled when another form of syntax was expected. (e.g. "expected a <type> but found <this>") -OSASyntaxError = -2740 #Signaled when a syntax error occurs. (e.g. "Syntax error" or "<this> can't go after <that>") -errASCantCompareMoreThan32k = -2721 #Parser/Compiler errors: -errASCantConsiderAndIgnore = -2720 #errASCantConsiderAndIgnore -errOSACantCreate = -2710 #errOSACantCreate -errOSACantGetTerminology = -2709 #errOSACantGetTerminology -errOSADataBlockTooLarge = -2708 #Signaled when an intrinsic limitation is exceeded for the size of a value or data structure. -errOSAInternalTableOverflow = -2707 #Signaled when a runtime internal data structure overflows -errOSAStackOverflow = -2706 #Signaled when the runtime stack overflows -errOSACorruptTerminology = -2705 #Signaled when an application's terminology resource is not readable -errOSAAppNotHighLevelEventAware = -2704 #Signaled when an application can't respond to AppleEvents -errOSACantLaunch = -2703 #Signaled when application can't be launched or when it is remote and program linking is not enabled -errOSANumericOverflow = -2702 #Signaled when integer or real value is too large to be represented -errOSADivideByZero = -2701 #Signaled when there is an attempt to divide by zero -errOSAGeneralError = -2700 #Signaled by user scripts or applications when no actual error code is to be returned. -noIconDataAvailableErr = -2582 #The necessary icon data is not available -noSuchIconErr = -2581 #The requested icon could not be found -invalidIconRefErr = -2580 #The icon ref is not valid -nrCallNotSupported = -2557 #This call is not available or supported on this machine -nrTransactionAborted = -2556 #transaction was aborted -nrExitedIteratorScope = -2555 #outer scope of iterator was exited -nrIterationDone = -2554 #iteration operation is done -nrPropertyAlreadyExists = -2553 #property already exists -nrInvalidEntryIterationOp = -2552 #invalid entry iteration operation -nrPathBufferTooSmall = -2551 #buffer for path is too small -nrPathNotFound = -2550 #a path component lookup failed -nrResultCodeBase = -2549 #nrResultCodeBase -nrOverrunErr = -2548 #nrOverrunErr -nrNotModifiedErr = -2547 #nrNotModifiedErr -nrTypeMismatchErr = -2546 #nrTypeMismatchErr -nrPowerSwitchAbortErr = -2545 #nrPowerSwitchAbortErr -nrPowerErr = -2544 #nrPowerErr -nrDataTruncatedErr = -2543 #nrDataTruncatedErr -nrNotSlotDeviceErr = -2542 #nrNotSlotDeviceErr -nrNameErr = -2541 #nrNameErr -nrNotCreatedErr = -2540 #nrNotCreatedErr -nrNotFoundErr = -2539 #nrNotFoundErr -nrInvalidNodeErr = -2538 #nrInvalidNodeErr -nrNotEnoughMemoryErr = -2537 #nrNotEnoughMemoryErr -nrLockedErr = -2536 #nrLockedErr -mmInternalError = -2526 #mmInternalError -tsmDefaultIsNotInputMethodErr = -2524 #Current Input source is KCHR or uchr, not Input Method (GetDefaultInputMethod) -tsmNoStem = -2523 #No stem exists for the token -tsmNoMoreTokens = -2522 #No more tokens are available for the source text -tsmNoHandler = -2521 #No Callback Handler exists for callback -tsmInvalidContext = -2520 #Invalid TSMContext specified in call -tsmUnknownErr = -2519 #any other errors -tsmUnsupportedTypeErr = -2518 #unSupported interface type error -tsmScriptHasNoIMErr = -2517 #script has no imput method or is using old IM -tsmInputMethodIsOldErr = -2516 #returned by GetDefaultInputMethod -tsmComponentAlreadyOpenErr = -2515 #text service already opened for the document -tsmTSNotOpenErr = -2514 #text service is not open -tsmTSHasNoMenuErr = -2513 #the text service has no menu -tsmUseInputWindowErr = -2512 #not TSM aware because we are using input window -tsmDocumentOpenErr = -2511 #there are open documents -tsmTextServiceNotFoundErr = -2510 #no text service found -tsmCantOpenComponentErr = -2509 #canÕt open the component -tsmNoOpenTSErr = -2508 #no open text service -tsmDocNotActiveErr = -2507 #document is NOT active -tsmTSMDocBusyErr = -2506 #document is still active -tsmInvalidDocIDErr = -2505 #invalid TSM documentation id -tsmNeverRegisteredErr = -2504 #app never registered error (not TSM aware) -tsmAlreadyRegisteredErr = -2503 #want to register again error -tsmNotAnAppErr = -2502 #not an application error -tsmInputMethodNotFoundErr = -2501 #tsmInputMethodNotFoundErr -tsmUnsupScriptLanguageErr = -2500 #tsmUnsupScriptLanguageErr -kernelUnrecoverableErr = -2499 #kernelUnrecoverableErr -kernelReturnValueErr = -2422 #kernelReturnValueErr -kernelAlreadyFreeErr = -2421 #kernelAlreadyFreeErr -kernelIDErr = -2419 #kernelIDErr -kernelExceptionErr = -2418 #kernelExceptionErr -kernelTerminatedErr = -2417 #kernelTerminatedErr -kernelInUseErr = -2416 #kernelInUseErr -kernelTimeoutErr = -2415 #kernelTimeoutErr -kernelAsyncReceiveLimitErr = -2414 #kernelAsyncReceiveLimitErr -kernelAsyncSendLimitErr = -2413 #kernelAsyncSendLimitErr -kernelAttributeErr = -2412 #kernelAttributeErr -kernelExecutionLevelErr = -2411 #kernelExecutionLevelErr -kernelDeletePermissionErr = -2410 #kernelDeletePermissionErr -kernelExecutePermissionErr = -2409 #kernelExecutePermissionErr -kernelReadPermissionErr = -2408 #kernelReadPermissionErr -kernelWritePermissionErr = -2407 #kernelWritePermissionErr -kernelObjectExistsErr = -2406 #kernelObjectExistsErr -kernelUnsupportedErr = -2405 #kernelUnsupportedErr -kernelPrivilegeErr = -2404 #kernelPrivilegeErr -kernelOptionsErr = -2403 #kernelOptionsErr -kernelCanceledErr = -2402 #kernelCanceledErr -kernelIncompleteErr = -2401 #kernelIncompleteErr -badCallOrderErr = -2209 #Usually due to a status call being called prior to being setup first -noDMAErr = -2208 #CanÕt do DMA digitizing (i.e. can't go to requested dest -badDepthErr = -2207 #CanÕt digitize into this depth -notExactSizeErr = -2206 #CanÕt do exact size requested -noMoreKeyColorsErr = -2205 #all key indexes in use -notExactMatrixErr = -2204 #warning of bad matrix, digitizer did its best -matrixErr = -2203 #bad matrix, digitizer did nothing -qtParamErr = -2202 #bad input parameter (out of range, etc) -digiUnimpErr = -2201 #feature unimplemented -qtXMLApplicationErr = -2159 #qtXMLApplicationErr -qtXMLParseErr = -2158 #qtXMLParseErr -qtActionNotHandledErr = -2157 #qtActionNotHandledErr -notEnoughDataErr = -2149 #notEnoughDataErr -urlDataHFTPURLErr = -2148 #urlDataHFTPURLErr -urlDataHFTPServerDisconnectedErr = -2147 #urlDataHFTPServerDisconnectedErr -urlDataHFTPNoPasswordErr = -2146 #urlDataHFTPNoPasswordErr -urlDataHFTPNeedPasswordErr = -2145 #urlDataHFTPNeedPasswordErr -urlDataHFTPBadNameListErr = -2144 #urlDataHFTPBadNameListErr -urlDataHFTPNoNetDriverErr = -2143 #urlDataHFTPNoNetDriverErr -urlDataHFTPFilenameErr = -2142 #urlDataHFTPFilenameErr -urlDataHFTPPermissionsErr = -2141 #urlDataHFTPPermissionsErr -urlDataHFTPQuotaErr = -2140 #urlDataHFTPQuotaErr -urlDataHFTPNoDirectoryErr = -2139 #urlDataHFTPNoDirectoryErr -urlDataHFTPDataConnectionErr = -2138 #urlDataHFTPDataConnectionErr -urlDataHFTPServerErr = -2137 #urlDataHFTPServerErr -urlDataHFTPBadPasswordErr = -2136 #urlDataHFTPBadPasswordErr -urlDataHFTPBadUserErr = -2135 #urlDataHFTPBadUserErr -urlDataHFTPShutdownErr = -2134 #urlDataHFTPShutdownErr -urlDataHFTPProtocolErr = -2133 #urlDataHFTPProtocolErr -urlDataHHTTPRedirectErr = -2132 #urlDataHHTTPRedirectErr -urlDataHHTTPURLErr = -2131 #urlDataHHTTPURLErr -urlDataHHTTPNoNetDriverErr = -2130 #urlDataHHTTPNoNetDriverErr -urlDataHHTTPProtocolErr = -2129 #urlDataHHTTPProtocolErr -qtNetworkAlreadyAllocatedErr = -2127 #qtNetworkAlreadyAllocatedErr -notAllowedToSaveMovieErr = -2126 #notAllowedToSaveMovieErr -fileOffsetTooBigErr = -2125 #fileOffsetTooBigErr -ASDEntryNotFoundErr = -2124 #ASDEntryNotFoundErr -ASDBadForkErr = -2123 #ASDBadForkErr -ASDBadHeaderErr = -2122 #ASDBadHeaderErr -AAPNotFoundErr = -2121 #AAPNotFoundErr -AAPNotCreatedErr = -2120 #AAPNotCreatedErr -qfcbNotCreatedErr = -2119 #qfcbNotCreatedErr -qfcbNotFoundErr = -2118 #qfcbNotFoundErr -wackBadMetaDataErr = -2117 #wackBadMetaDataErr -wackForkNotFoundErr = -2116 #wackForkNotFoundErr -wackBadFileErr = -2115 #wackBadFileErr -unknownFormatErr = -2114 #unknownFormatErr -pathNotVerifiedErr = -2113 #pathNotVerifiedErr -noPathMappingErr = -2112 #noPathMappingErr -emptyPathErr = -2111 #emptyPathErr -pathTooLongErr = -2110 #pathTooLongErr -cannotBeLeafAtomErr = -2109 #cannotBeLeafAtomErr -invalidAtomTypeErr = -2108 #invalidAtomTypeErr -invalidAtomContainerErr = -2107 #invalidAtomContainerErr -invalidAtomErr = -2106 #invalidAtomErr -duplicateAtomTypeAndIDErr = -2105 #duplicateAtomTypeAndIDErr -atomIndexInvalidErr = -2104 #atomIndexInvalidErr -atomsNotOfSameTypeErr = -2103 #atomsNotOfSameTypeErr -notLeafAtomErr = -2102 #notLeafAtomErr -cannotFindAtomErr = -2101 #cannotFindAtomErr -unsupportedProcessorErr = -2097 #unsupportedProcessorErr -unsupportedOSErr = -2096 #unsupportedOSErr -qtmlUninitialized = -2095 #qtmlUninitialized -qtmlDllEntryNotFoundErr = -2094 #Windows specific errors (when qtml is loading) -qtmlDllLoadErr = -2093 #Windows specific errors (when qtml is loading) -componentDllEntryNotFoundErr = -2092 #Windows specific errors (when component is loading) -componentDllLoadErr = -2091 #Windows specific errors (when component is loading) -videoOutputInUseErr = -2090 #videoOutputInUseErr -noExportProcAvailableErr = -2089 #noExportProcAvailableErr -tuneParseOSErr = -2087 #tuneParseOSErr -tunePlayerFullOSErr = -2086 #tunePlayerFullOSErr -noteChannelNotAllocatedOSErr = -2085 #noteChannelNotAllocatedOSErr -illegalNoteChannelOSErr = -2084 #illegalNoteChannelOSErr -synthesizerOSErr = -2083 #synthesizerOSErr -synthesizerNotRespondingOSErr = -2082 #synthesizerNotRespondingOSErr -midiManagerAbsentOSErr = -2081 #midiManagerAbsentOSErr -illegalControllerOSErr = -2080 #illegalControllerOSErr -illegalInstrumentOSErr = -2079 #illegalInstrumentOSErr -illegalKnobValueOSErr = -2078 #illegalKnobValueOSErr -illegalKnobOSErr = -2077 #illegalKnobOSErr -illegalChannelOSErr = -2076 #illegalChannelOSErr -illegalPartOSErr = -2075 #illegalPartOSErr -illegalVoiceAllocationOSErr = -2074 #illegalVoiceAllocationOSErr -cantReceiveFromSynthesizerOSErr = -2073 #cantReceiveFromSynthesizerOSErr -cantSendToSynthesizerOSErr = -2072 #cantSendToSynthesizerOSErr -notImplementedMusicOSErr = -2071 #notImplementedMusicOSErr -internalComponentErr = -2070 #internalComponentErr -invalidSpriteIDErr = -2069 #invalidSpriteIDErr -invalidImageIndexErr = -2068 #invalidImageIndexErr -invalidSpriteIndexErr = -2067 #invalidSpriteIndexErr -gWorldsNotSameDepthAndSizeErr = -2066 #gWorldsNotSameDepthAndSizeErr -invalidSpritePropertyErr = -2065 #invalidSpritePropertyErr -invalidSpriteWorldPropertyErr = -2064 #invalidSpriteWorldPropertyErr -missingRequiredParameterErr = -2063 #missingRequiredParameterErr -movieTextNotFoundErr = -2062 #movieTextNotFoundErr -sourceNotFoundErr = -2061 #sourceNotFoundErr -noSourceTreeFoundErr = -2060 #noSourceTreeFoundErr -samplesAlreadyInMediaErr = -2059 #samplesAlreadyInMediaErr -auxiliaryExportDataUnavailable = -2058 #auxiliaryExportDataUnavailable -unsupportedAuxiliaryImportData = -2057 #unsupportedAuxiliaryImportData -soundSupportNotAvailableErr = -2056 #QT for Windows error -noSoundTrackInMovieErr = -2055 #QT for Windows error -noVideoTrackInMovieErr = -2054 #QT for Windows error -featureUnsupported = -2053 #featureUnsupported -couldNotUseAnExistingSample = -2052 #couldNotUseAnExistingSample -noDefaultDataRef = -2051 #noDefaultDataRef -badDataRefIndex = -2050 #badDataRefIndex -invalidDataRefContainer = -2049 #invalidDataRefContainer -noMovieFound = -2048 #noMovieFound -dataNoDataRef = -2047 #dataNoDataRef -endOfDataReached = -2046 #endOfDataReached -dataAlreadyClosed = -2045 #dataAlreadyClosed -dataAlreadyOpenForWrite = -2044 #dataAlreadyOpenForWrite -dataNotOpenForWrite = -2043 #dataNotOpenForWrite -dataNotOpenForRead = -2042 #dataNotOpenForRead -invalidSampleDescription = -2041 #invalidSampleDescription -invalidChunkCache = -2040 #invalidChunkCache -invalidSampleDescIndex = -2039 #invalidSampleDescIndex -invalidChunkNum = -2038 #invalidChunkNum -invalidSampleNum = -2037 #invalidSampleNum -invalidRect = -2036 #invalidRect -cantEnableTrack = -2035 #cantEnableTrack -internalQuickTimeError = -2034 #internalQuickTimeError -badEditIndex = -2033 #badEditIndex -timeNotInMedia = -2032 #timeNotInMedia -timeNotInTrack = -2031 #timeNotInTrack -trackNotInMovie = -2030 #trackNotInMovie -trackIDNotFound = -2029 #trackIDNotFound -badTrackIndex = -2028 #badTrackIndex -maxSizeToGrowTooSmall = -2027 #maxSizeToGrowTooSmall -userDataItemNotFound = -2026 #userDataItemNotFound -staleEditState = -2025 #staleEditState -nonMatchingEditState = -2024 #nonMatchingEditState -invalidEditState = -2023 #invalidEditState -cantCreateSingleForkFile = -2022 #happens when file already exists -wfFileNotFound = -2021 #wfFileNotFound -movieToolboxUninitialized = -2020 #movieToolboxUninitialized -progressProcAborted = -2019 #progressProcAborted -mediaTypesDontMatch = -2018 #mediaTypesDontMatch -badEditList = -2017 #badEditList -cantPutPublicMovieAtom = -2016 #cantPutPublicMovieAtom -invalidTime = -2015 #invalidTime -invalidDuration = -2014 #invalidDuration -invalidHandler = -2013 #invalidHandler -invalidDataRef = -2012 #invalidDataRef -invalidSampleTable = -2011 #invalidSampleTable -invalidMovie = -2010 #invalidMovie -invalidTrack = -2009 #invalidTrack -invalidMedia = -2008 #invalidMedia -noDataHandler = -2007 #noDataHandler -noMediaHandler = -2006 #noMediaHandler -badComponentType = -2005 #badComponentType -cantOpenHandler = -2004 #cantOpenHandler -cantFindHandler = -2003 #cantFindHandler -badPublicMovieAtom = -2002 #badPublicMovieAtom -badImageDescription = -2001 #badImageDescription -couldNotResolveDataRef = -2000 #couldNotResolveDataRef -nonDragOriginatorErr = -1862 #illegal attempt at originator only data -badImageErr = -1861 #bad translucent image PixMap -badImageRgnErr = -1860 #bad translucent image region -noSuitableDisplaysErr = -1859 #no displays support translucency -unsupportedForPlatformErr = -1858 #call is for PowerPC only -dragNotAcceptedErr = -1857 #drag was not accepted by receiver -handlerNotFoundErr = -1856 #handler not found -duplicateHandlerErr = -1855 #handler already exists -cantGetFlavorErr = -1854 #error while trying to get flavor data -duplicateFlavorErr = -1853 #flavor type already exists -badDragFlavorErr = -1852 #unknown flavor type -badDragItemErr = -1851 #unknown drag item reference -badDragRefErr = -1850 #unknown drag reference -errEndOfBody = -1813 #errEndOfBody -errEndOfDocument = -1812 #errEndOfDocument -errTopOfBody = -1811 #errTopOfBody -errTopOfDocument = -1810 #errTopOfDocument -errOffsetIsOutsideOfView = -1801 #errOffsetIsOutsideOfView -errOffsetInvalid = -1800 #errOffsetInvalid -errOSACantOpenComponent = -1762 #Can't connect to scripting system with that ID -errOSAComponentMismatch = -1761 #Parameters are from 2 different components -errOSADataFormatTooNew = -1759 #errOSADataFormatTooNew -errOSADataFormatObsolete = -1758 #errOSADataFormatObsolete -errOSANoSuchDialect = -1757 #errOSANoSuchDialect -errOSASourceNotAvailable = -1756 #errOSASourceNotAvailable -errOSABadSelector = -1754 #errOSABadSelector -errOSAScriptError = -1753 #errOSAScriptError -errOSABadStorageType = -1752 #errOSABadStorageType -errOSAInvalidID = -1751 #errOSAInvalidID -errOSASystemError = -1750 #errOSASystemError -errAEBufferTooSmall = -1741 #buffer for AEFlattenDesc too small -errAEBuildSyntaxError = -1740 #AEBuildDesc and friends detected a syntax error -errAEDescIsNull = -1739 #attempting to perform an invalid operation on a null descriptor -errAEStreamAlreadyConverted = -1738 #attempt to convert a stream that has already been converted -errAEStreamBadNesting = -1737 #nesting violation while streaming -errAEDuplicateHandler = -1736 #attempt to install handler in table for identical class and id (1.1 or greater) -errAEEventFiltered = -1735 #event has been filtered, and should not be propogated (1.1 or greater) -errAEReceiveEscapeCurrent = -1734 #break out of only lowest level of AEReceive (1.1 or greater) -errAEReceiveTerminate = -1733 #break out of all levels of AEReceive to the topmost (1.1 or greater) -errAERecordingIsAlreadyOn = -1732 #available only in version 1.0.1 or greater -errAEUnknownObjectType = -1731 #available only in version 1.0.1 or greater -errAEEmptyListContainer = -1730 #Attempt to pass empty list as container to accessor -errAENegativeCount = -1729 #CountProc returned negative value -errAENoSuchObject = -1728 #e.g.,: specifier asked for the 3rd, but there are only 2. Basically, this indicates a run-time resolution error. -errAENotAnObjSpec = -1727 #Param to AEResolve not of type 'obj ' -errAEBadTestKey = -1726 #Test is neither typeLogicalDescriptor nor typeCompDescriptor -errAENoSuchLogical = -1725 #Something other than AND, OR, or NOT -errAEAccessorNotFound = -1723 #Accessor proc matching wantClass and containerType or wildcards not found -errAEWrongNumberArgs = -1721 #Logical op kAENOT used with other than 1 term -errAEImpossibleRange = -1720 #A range like 3rd to 2nd, or 1st to all. -errAEIllegalIndex = -1719 #index is out of range in a put operation -errAEReplyNotArrived = -1718 #the contents of the reply you are accessing have not arrived yet -errAEHandlerNotFound = -1717 #no handler in the dispatch tables fits the parameters to AEGetEventHandler or AEGetCoercionHandler -errAEUnknownAddressType = -1716 #the target address type is not known -errAEParamMissed = -1715 #a required parameter was not accessed -errAENotASpecialFunction = -1714 #there is no special function for/with this keyword -errAENoUserInteraction = -1713 #no user interaction is allowed -errAETimeout = -1712 #the AppleEvent timed out -errAEWaitCanceled = -1711 #in AESend, the user cancelled out of wait loop for reply or receipt -errAEUnknownSendMode = -1710 #mode wasn't NoReply, WaitReply, or QueueReply or Interaction level is unknown -errAEReplyNotValid = -1709 #AEResetTimer was passed an invalid reply parameter -errAEEventNotHandled = -1708 #the AppleEvent was not handled by any handler -errAENotAppleEvent = -1707 #the event is not in AppleEvent format -errAENewerVersion = -1706 #need newer version of the AppleEvent manager -errAEBadListItem = -1705 #the specified list item does not exist -errAENotAEDesc = -1704 #errAENotAEDesc -errAEWrongDataType = -1703 #errAEWrongDataType -errAECorruptData = -1702 #errAECorruptData -errAEDescNotFound = -1701 #errAEDescNotFound -errAECoercionFail = -1700 #bad parameter data or unable to coerce the data supplied -errFSIteratorNotSupported = -1424 #The iterator's flags or container are not supported by this call -errFSIteratorNotFound = -1423 #Passed FSIterator is not an open iterator -errFSBadIteratorFlags = -1422 #Flags passed to FSOpenIterator are bad -errFSForkExists = -1421 #Named fork already exists. -errFSRefsDifferent = -1420 #FSCompareFSRefs; refs are for different objects -errFSBadSearchParams = -1419 #Something wrong with CatalogSearch searchParams -errFSBadItemCount = -1418 #maximumItems was zero -errFSNoMoreItems = -1417 #Iteration ran out of items to return -errFSBadAllocFlags = -1413 #Invalid bits set in allocationFlags -errFSBadPosMode = -1412 #Newline bits set in positionMode -errFSMissingName = -1411 #A Unicode name parameter was NULL or nameLength parameter was zero -errFSNameTooLong = -1410 #File/fork name is too long to create/rename -errFSForkNotFound = -1409 #Named fork does not exist -errFSNotAFolder = -1407 #Expected a folder, got a file -errFSMissingCatInfo = -1406 #A CatalogInfo parameter was NULL -errFSBadInfoBitmap = -1405 #A CatalogInfoBitmap or VolumeInfoBitmap has reserved or invalid bits set -errFSBadForkRef = -1404 #A ForkRefNum parameter was bad -errFSBadBuffer = -1403 #A buffer parameter was bad -errFSBadForkName = -1402 #Fork name parameter is bad -errFSBadFSRef = -1401 #FSRef parameter is bad -errFSUnknownCall = -1400 #selector is not recognized by this filesystem -badFCBErr = -1327 #FCBRecPtr is not valid -volVMBusyErr = -1311 #can't eject because volume is in use by VM -fsDataTooBigErr = -1310 #file or volume is too big for system -fileBoundsErr = -1309 #file's EOF, offset, mark or size is too big -notARemountErr = -1308 #when _Mount allows only remounts and doesn't get one -badFidErr = -1307 #file id is dangling or doesn't match with the file number -sameFileErr = -1306 #can't exchange a file with itself -desktopDamagedErr = -1305 #desktop database files are corrupted -catChangedErr = -1304 #the catalog has been modified -diffVolErr = -1303 #files on different volumes -notAFileErr = -1302 #directory specified -fidExists = -1301 #file id already exists -fidNotFound = -1300 #no file thread exists. -errRefNum = -1280 #bad connection refNum -errAborted = -1279 #control call was aborted -errState = -1278 #bad connection state for this operation -errOpening = -1277 #open connection request failed -errAttention = -1276 #attention message too long -errFwdReset = -1275 #read terminated by forward reset -errDSPQueueSize = -1274 #DSP Read/Write Queue Too small -errOpenDenied = -1273 #open connection request was denied -reqAborted = -1105 #reqAborted -noDataArea = -1104 #noDataArea -noSendResp = -1103 #noSendResp -cbNotFound = -1102 #cbNotFound -noRelErr = -1101 #noRelErr -badBuffNum = -1100 #badBuffNum -badATPSkt = -1099 #badATPSkt -tooManySkts = -1098 #tooManySkts -tooManyReqs = -1097 #tooManyReqs -reqFailed = -1096 #reqFailed -aspNoAck = -1075 #No ack on attention request (server err) -aspTooMany = -1074 #Too many clients (server error) -aspSizeErr = -1073 #Command block too big -aspSessClosed = -1072 #Session closed -aspServerBusy = -1071 #Server cannot open another session -aspParamErr = -1070 #Parameter error -aspNoServers = -1069 #No servers at that address -aspNoMoreSess = -1068 #No more sessions on server -aspBufTooSmall = -1067 #Buffer too small -aspBadVersNum = -1066 #Server cannot support this ASP version -nbpNISErr = -1029 #Error trying to open the NIS -nbpNotFound = -1028 #Name not found on remove -nbpDuplicate = -1027 #Duplicate name exists already -nbpConfDiff = -1026 #Name confirmed at different socket -nbpNoConfirm = -1025 #nbpNoConfirm -nbpBuffOvr = -1024 #Buffer overflow in LookupName -noMaskFoundErr = -1000 #Icon Utilties Error -kFMFontContainerAccessErr = -985 #kFMFontContainerAccessErr -kFMFontTableAccessErr = -984 #kFMFontTableAccessErr -kFMIterationScopeModifiedErr = -983 #kFMIterationScopeModifiedErr -kFMInvalidFontErr = -982 #kFMInvalidFontErr -kFMInvalidFontFamilyErr = -981 #kFMInvalidFontFamilyErr -kFMIterationCompleted = -980 #kFMIterationCompleted -guestNotAllowedErr = -932 #destination port requires authentication -badLocNameErr = -931 #location name malformed -badServiceMethodErr = -930 #illegal service type, or not supported -noUserRecErr = -928 #Invalid user reference number -authFailErr = -927 #unable to authenticate user at destination -noInformErr = -926 #PPCStart failed because destination did not have inform pending -networkErr = -925 #An error has occurred in the network, not too likely -noUserRefErr = -924 #unable to create a new userRefNum -notLoggedInErr = -923 #The default userRefNum does not yet exist -noDefaultUserErr = -922 #user hasn't typed in owners name in Network Setup Control Pannel -badPortNameErr = -919 #PPCPortRec malformed -sessClosedErr = -917 #session was closed -portClosedErr = -916 #port was closed -noResponseErr = -915 #unable to contact destination -noToolboxNameErr = -914 #A system resource is missing, not too likely -noMachineNameErr = -913 #user hasn't named his Macintosh in the Network Setup Control Panel -userRejectErr = -912 #Destination rejected the session request -noUserNameErr = -911 #user name unknown on destination machine -portNameExistsErr = -910 #port is already open (perhaps in another app) -badReqErr = -909 #bad parameter or invalid state for operation -noSessionErr = -908 #Invalid session reference number -sessTableErr = -907 #Out of session tables, try again later -destPortErr = -906 #Port does not exist at destination -localOnlyErr = -905 #Network activity is currently disabled -noGlobalsErr = -904 #The system is hosed, better re-boot -noPortErr = -903 #Unable to open port or bad portRefNum. If you're calling -nameTypeErr = -902 #Invalid or inappropriate locationKindSelector in locationName -notInitErr = -900 #PPCToolBox not initialized -notAppropriateForClassic = -877 #This application won't or shouldn't run on Classic (Problem 2481058). -appVersionTooOld = -876 #The application's creator and version are incompatible with the current version of Mac OS. -wrongApplicationPlatform = -875 #The application could not launch because the required platform is not available -hmCloseViewActive = -863 #Returned from HMRemoveBalloon if CloseView was active -hmNoBalloonUp = -862 #Returned from HMRemoveBalloon if no balloon was visible when call was made -hmOperationUnsupported = -861 #Returned from HMShowBalloon call if bad method passed to routine -hmUnknownHelpType = -859 #Returned if help msg record contained a bad type -hmWrongVersion = -858 #Returned if help mgr resource was the wrong version -hmSkippedBalloon = -857 #Returned from calls if helpmsg specified a skip balloon -hmHelpManagerNotInited = -855 #Returned from HMGetHelpMenuHandle if help menu not setup -hmSameAsLastBalloon = -854 #Returned from HMShowMenuBalloon if menu & item is same as last time -hmBalloonAborted = -853 #Returned if mouse was moving or mouse wasn't in window port rect -hmHelpDisabled = -850 #Show Balloons mode was off, call to routine ignored -rcDBPackNotInited = -813 #attempt to call other routine before InitDBPack -rcDBWrongVersion = -812 #incompatible versions -rcDBNoHandler = -811 #no app handler for specified data type -rcDBBadAsyncPB = -810 #tried to kill a bad pb -rcDBAsyncNotSupp = -809 #ddev does not support async calls -rcDBBadDDEV = -808 #bad ddev specified on DBInit -rcDBBadSessNum = -807 #bad session number for DBGetConnInfo -rcDBBadSessID = -806 #rcDBBadSessID -rcDBExec = -805 #rcDBExec -rcDBBreak = -804 #rcDBBreak -rcDBBadType = -803 #rcDBBadType -rcDBError = -802 #rcDBError -rcDBValue = -801 #rcDBValue -rcDBNull = -800 #rcDBNull -icTooManyProfilesErr = -677 #too many profiles in database -icProfileNotFoundErr = -676 #profile not found -icConfigInappropriateErr = -675 #incorrect manufacturer code -icConfigNotFoundErr = -674 #no internet configuration was found -icNoURLErr = -673 #no URL found -icNothingToOverrideErr = -672 #no component for the override component to capture -icNoMoreWritersErr = -671 #you cannot begin a write session because someone else is already doing it -icTruncatedErr = -670 #more data was present than was returned -icInternalErr = -669 #Internet Config internal error -icPrefDataErr = -668 #problem with preference data -icPermErr = -667 #cannot set preference -icPrefNotFoundErr = -666 #Internet preference not found -vmInvalidOwningProcessErr = -648 #current process does not own the BackingFileID or FileViewID -vmAddressNotInFileViewErr = -647 #address is not in a FileView -vmNoMoreFileViewsErr = -646 #no more FileViews were found -vmFileViewAccessErr = -645 #requested FileViewAccess cannot be obtained -vmInvalidFileViewIDErr = -644 #invalid FileViewID -vmNoMoreBackingFilesErr = -643 #no more BackingFiles were found -vmBusyBackingFileErr = -642 #open views found on BackingFile -vmMappingPrivilegesErr = -641 #requested MappingPrivileges cannot be obtained -vmInvalidBackingFileIDErr = -640 #invalid BackingFileID -noMMUErr = -626 #no MMU present -cannotDeferErr = -625 #unable to defer additional functions -interruptsMaskedErr = -624 #donÕt call with interrupts masked -notLockedErr = -623 #specified range of memory is not locked -cannotMakeContiguousErr = -622 #cannot make specified range contiguous -notHeldErr = -621 #specified range of memory is not held -notEnoughMemoryErr = -620 #insufficient physical memory -threadProtocolErr = -619 #threadProtocolErr -threadNotFoundErr = -618 #threadNotFoundErr -threadTooManyReqsErr = -617 #threadTooManyReqsErr -noUserInteractionAllowed = -610 #no user interaction allowed -connectionInvalid = -609 #connectionInvalid -noOutstandingHLE = -608 #noOutstandingHLE -bufferIsSmall = -607 #error returns from Post and Accept -appIsDaemon = -606 #app is BG-only, and launch flags disallow this -appMemFullErr = -605 #application SIZE not big enough for launch -hardwareConfigErr = -604 #hardware configuration not correct for call -protocolErr = -603 #app made module calls in improper order -appModeErr = -602 #memory mode is 32-bit, but app not 32-bit clean -memFragErr = -601 #not enough room to launch app w/special requirements -procNotFound = -600 #no eligible process with specified descriptor -driverHardwareGoneErr = -503 #disk driver's hardware was disconnected -hwParamErr = -502 #bad selector for _HWPriv -teScrapSizeErr = -501 #scrap item too big for text edit record -rgnTooBigErr = -500 #rgnTooBigErr -exUserBreak = -492 #user debugger break; execute debugger commands on stack -strUserBreak = -491 #user debugger break; display string on stack -userBreak = -490 #user debugger break -notThePublisherWrn = -463 #not the first registered publisher for that container -containerAlreadyOpenWrn = -462 #container already opened by this section -containerNotFoundWrn = -461 #could not find editionContainer at this time -multiplePublisherWrn = -460 #A Publisher is already registered for that container -badSubPartErr = -454 #can not use sub parts in this release -badEditionFileErr = -453 #edition file is corrupt -notRegisteredSectionErr = -452 #not a registered SectionRecord -badSectionErr = -451 #not a valid SectionRecord -editionMgrInitErr = -450 #edition manager not inited by this app -fsmUnknownFSMMessageErr = -438 #unknown message passed to FSM -fsmNoAlternateStackErr = -437 #no alternate stack for HFS CI -fsmBadFSDVersionErr = -436 #FSM version incompatible with FSD -fsmDuplicateFSIDErr = -435 #FSID already exists on InstallFS -fsmBadFSDLenErr = -434 #FSD size incompatible with current FSM vers -fsmBadFFSNameErr = -433 #Name length not 1 <= length <= 31 -fsmBusyFFSErr = -432 #File system is busy, cannot be removed -fsmFFSNotFoundErr = -431 #Foreign File system does not exist - new Pack2 could return this error too -btKeyAttrErr = -417 #There is no such a key attribute. -btKeyLenErr = -416 #Maximum key length is too long or equal to zero. -btRecNotFnd = -415 #Record cannot be found. -btDupRecErr = -414 #Record already exists. -btNoSpace = -413 #Can't allocate disk space. -notBTree = -410 #The file is not a dictionary. -gcrOnMFMErr = -400 #gcr format on high density media error -slotNumErr = -360 #invalid slot # error -smRecNotFnd = -351 #Record not found in the SRT. -smSRTOvrFlErr = -350 #SRT over flow. -smNoGoodOpens = -349 #No opens were successfull in the loop. -smOffsetErr = -348 #Offset was too big (temporary error -smByteLanesErr = -347 #NumByteLanes was determined to be zero. -smBadsPtrErr = -346 #Bad pointer was passed to sCalcsPointer -smsGetDrvrErr = -345 #Error occurred during _sGetDriver. -smNoMoresRsrcs = -344 #No more sResources -smDisDrvrNamErr = -343 #Error occurred during _sDisDrvrName. -smGetDrvrNamErr = -342 #Error occurred during _sGetDrvrName. -smCkStatusErr = -341 #Status of slot = fail. -smBlkMoveErr = -340 #_BlockMove error -smNewPErr = -339 #_NewPtr error -smSelOOBErr = -338 #Selector out of bounds error -smSlotOOBErr = -337 #Slot out of bounds error -smNilsBlockErr = -336 #Nil sBlock error (Dont allocate and try to use a nil sBlock) -smsPointerNil = -335 #LPointer is nil From sOffsetData. If this error occurs; check sInfo rec for more information. -smCPUErr = -334 #Code revision is wrong -smCodeRevErr = -333 #Code revision is wrong -smReservedErr = -332 #Reserved field not zero -smBadsList = -331 #Bad sList: Id1 < Id2 < Id3 ...format is not followed. -smBadRefId = -330 #Reference Id not found in List -smBusErrTO = -320 #BusError time out. -smBadBoardId = -319 #BoardId was wrong; re-init the PRAM record. -smReservedSlot = -318 #slot is reserved, VM should not use this address space. -smInitTblVErr = -317 #An error occurred while trying to initialize the Slot Resource Table. -smInitStatVErr = -316 #The InitStatusV field was negative after primary or secondary init. -smNoBoardId = -315 #No Board Id. -smGetPRErr = -314 #Error occurred during _sGetPRAMRec (See SIMStatus). -smNoBoardSRsrc = -313 #No Board sResource. -smDisposePErr = -312 #_DisposePointer error -smFHBlkDispErr = -311 #Error occurred during _sDisposePtr (Dispose of FHeader block). -smFHBlockRdErr = -310 #Error occurred during _sGetFHeader. -smBLFieldBad = -309 #ByteLanes field was bad. -smUnExBusErr = -308 #Unexpected BusError -smResrvErr = -307 #Fatal reserved error. Reserved field != 0. -smNosInfoArray = -306 #No sInfoArray. Memory Mgr error. -smDisabledSlot = -305 #This slot is disabled (-305 use to be smLWTstBad) -smNoDir = -304 #Directory offset is Nil -smRevisionErr = -303 #Wrong revison level -smFormatErr = -302 #FHeader Format is not Apple's -smCRCFail = -301 #CRC check failed for declaration data -smEmptySlot = -300 #No card in slot -nmTypErr = -299 #Notification Manager:wrong queue type -smPriInitErr = -293 #Error; Cards could not be initialized. -smPRAMInitErr = -292 #Error; Slot Resource Table could not be initialized. -smSRTInitErr = -291 #Error; Slot Resource Table could not be initialized. -smSDMInitErr = -290 #Error; SDM could not be initialized. -midiInvalidCmdErr = -261 #command not supported for port type -midiDupIDErr = -260 #duplicate client ID -midiNameLenErr = -259 #name supplied is longer than 31 characters -midiWriteErr = -258 #MIDIWritePacket couldn't write to all connected ports -midiNoConErr = -257 #no connection exists between specified ports -midiVConnectRmvd = -256 #pending virtual connection removed -midiVConnectMade = -255 #pending virtual connection resolved -midiVConnectErr = -254 #pending virtual connection created -midiTooManyConsErr = -253 #too many connections made -midiTooManyPortsErr = -252 #too many ports already installed in the system -midiNoPortErr = -251 #no port with that ID found -midiNoClientErr = -250 #no client with that ID found -badInputText = -247 #badInputText -badDictFormat = -246 #badDictFormat -incompatibleVoice = -245 #incompatibleVoice -voiceNotFound = -244 #voiceNotFound -bufTooSmall = -243 #bufTooSmall -synthNotReady = -242 #synthNotReady -synthOpenFailed = -241 #synthOpenFailed -noSynthFound = -240 #noSynthFound -siUnknownQuality = -232 #invalid quality selector (returned by driver) -siUnknownInfoType = -231 #invalid info type selector (returned by driver) -siInputDeviceErr = -230 #input device hardware failure -siBadRefNum = -229 #invalid input device reference number -siBadDeviceName = -228 #input device could not be opened -siDeviceBusyErr = -227 #input device already in use -siInvalidSampleSize = -226 #invalid sample size -siInvalidSampleRate = -225 #invalid sample rate -siHardDriveTooSlow = -224 #hard drive too slow to record to disk -siInvalidCompression = -223 #invalid compression type -siNoBufferSpecified = -222 #returned by synchronous SPBRecord if nil buffer passed -siBadSoundInDevice = -221 #invalid index passed to SoundInGetIndexedDevice -siNoSoundInHardware = -220 #no Sound Input hardware -siVBRCompressionNotSupported = -213 #vbr audio compression not supported for this operation -noMoreRealTime = -212 #not enough CPU cycles left to add another task -channelNotBusy = -211 #channelNotBusy -buffersTooSmall = -210 #can not operate in the memory allowed -channelBusy = -209 #the Channel is being used for a PFD already -badFileFormat = -208 #was not type AIFF or was of bad format,corrupt -notEnoughBufferSpace = -207 #could not allocate enough memory -badFormat = -206 #Sound Manager Error Returns -badChannel = -205 #Sound Manager Error Returns -resProblem = -204 #Sound Manager Error Returns -queueFull = -203 #Sound Manager Error Returns -notEnoughHardwareErr = -201 #Sound Manager Error Returns -noHardwareErr = -200 #Sound Manager Error Returns -mapReadErr = -199 #map inconsistent with operation -resAttrErr = -198 #attribute inconsistent with operation -rmvRefFailed = -197 #RmveReference failed -rmvResFailed = -196 #RmveResource failed -addRefFailed = -195 #AddReference failed -addResFailed = -194 #AddResource failed -resFNotFound = -193 #Resource file not found -resNotFound = -192 #Resource not found -inputOutOfBounds = -190 #Offset of Count out of bounds -writingPastEnd = -189 #Writing past end of file -resourceInMemory = -188 #Resource already in memory -CantDecompress = -186 #resource bent ("the bends") - can't decompress a compressed resource -badExtResource = -185 #extended resource has a bad format. -cmNoCurrentProfile = -182 #Responder error -cmUnsupportedDataType = -181 #Responder error -cmCantDeleteProfile = -180 #Responder error -cmCantXYZ = -179 #CMM cant handle XYZ space -cmCantConcatenateError = -178 #Profile can't be concatenated -cmProfilesIdentical = -177 #Profiles the same -cmProfileNotFound = -176 #Responder error -cmMethodNotFound = -175 #CMM not present -cmMethodError = -171 #cmMethodError -cmProfileError = -170 #cmProfileError -cDepthErr = -157 #invalid pixel depth -cResErr = -156 #invalid resolution for MakeITable -cDevErr = -155 #invalid type of graphics device -cProtectErr = -154 #colorTable entry protection violation -cRangeErr = -153 #range error on colorTable request -cNoMemErr = -152 #failed to allocate memory for structure -cTempMemErr = -151 #failed to allocate memory for temporary structures -cMatchErr = -150 #Color2Index failed to find an index -insufficientStackErr = -149 #insufficientStackErr -pixMapTooDeepErr = -148 #pixMapTooDeepErr -rgnOverflowErr = -147 #rgnOverflowErr -noMemForPictPlaybackErr = -145 #noMemForPictPlaybackErr -userCanceledErr = -128 #userCanceledErr -hMenuFindErr = -127 #could not find HMenu's parent in MenuKey (wrong error code - obsolete) -mBarNFnd = -126 #system error code for MBDF not found -updPixMemErr = -125 #insufficient memory to update a pixmap -volGoneErr = -124 #Server volume has been disconnected. -wrgVolTypErr = -123 #Wrong volume type error [operation not supported for MFS] -badMovErr = -122 #Move into offspring error -tmwdoErr = -121 #No free WDCB available -dirNFErr = -120 #Directory not found -memLockedErr = -117 #trying to move a locked block (MoveHHi) -memSCErr = -116 #Size Check failed -memBCErr = -115 #Block Check failed -memPCErr = -114 #Pointer Check failed -memAZErr = -113 #Address in zone check failed -memPurErr = -112 #trying to purge a locked or non-purgeable block -memWZErr = -111 #WhichZone failed (applied to free block) -memAdrErr = -110 #address was odd; or out of range -nilHandleErr = -109 #Master Pointer was NIL in HandleZone or other -memFullErr = -108 #Not enough room in heap zone -noTypeErr = -102 #No object of that type in scrap -noScrapErr = -100 #No scrap exists error -memROZWarn = -99 #soft error in ROZ -portNotCf = -98 #driver Open error code (parameter RAM not configured for this connection) -portInUse = -97 #driver Open error code (port is in use) -portNotPwr = -96 #serial port not currently powered -excessCollsns = -95 #excessive collisions on write -lapProtErr = -94 #error in attaching/detaching protocol -noBridgeErr = -93 #no network bridge for non-local send -eLenErr = -92 #Length error ddpLenErr -eMultiErr = -91 #Multicast address error ddpSktErr -breakRecd = -90 #Break received (SCC) -rcvrErr = -89 #SCC receiver error (framing; parity; OR) -prInitErr = -88 #InitUtil found the parameter ram uninitialized -prWrErr = -87 #parameter ram written didn't read-verify -clkWrErr = -86 #time written did not verify -clkRdErr = -85 #unable to read same clock value twice -verErr = -84 #track failed to verify -fmt2Err = -83 #can't get enough sync -fmt1Err = -82 #can't find sector 0 after track format -sectNFErr = -81 #sector number never found on a track -seekErr = -80 #track number wrong on address mark -spdAdjErr = -79 #unable to correctly adjust disk speed -twoSideErr = -78 #tried to read 2nd side on a 1-sided drive -initIWMErr = -77 #unable to initialize IWM -tk0BadErr = -76 #track 0 detect doesn't change -cantStepErr = -75 #step handshake failed -wrUnderrun = -74 #write underrun occurred -badDBtSlp = -73 #bad data mark bit slip nibbles -badDCksum = -72 #bad data mark checksum -noDtaMkErr = -71 #couldn't find a data mark header -badBtSlpErr = -70 #bad addr mark bit slip nibbles -badCksmErr = -69 #addr mark checksum didn't check -dataVerErr = -68 #read verify compare failed -noAdrMkErr = -67 #couldn't find valid addr mark -noNybErr = -66 #couldn't find 5 nybbles in 200 tries -offLinErr = -65 #r/w requested for an off-line drive -fontDecError = -64 #error during font declaration -wrPermErr = -61 #write permissions error -badMDBErr = -60 #bad master directory block -fsRnErr = -59 #file system internal error:during rename the old entry was deleted but could not be restored. -extFSErr = -58 #volume in question belongs to an external fs -noMacDskErr = -57 #not a mac diskette (sig bytes are wrong) -nsDrvErr = -56 #no such drive (tried to mount a bad drive num) -volOnLinErr = -55 #drive volume already on-line at MountVol -permErr = -54 #permissions error (on file open) -volOffLinErr = -53 #volume not on line error (was Ejected) -gfpErr = -52 #get file position error -rfNumErr = -51 #refnum error -paramErr = -50 #error in user parameter list -opWrErr = -49 #file already open with with write permission -dupFNErr = -48 #duplicate filename (rename) -fBsyErr = -47 #File is busy (delete) -vLckdErr = -46 #volume is locked -fLckdErr = -45 #file is locked -wPrErr = -44 #diskette is write protected. -fnfErr = -43 #File not found -tmfoErr = -42 #too many files open -mFulErr = -41 #memory full (open) or file won't fit (load) -posErr = -40 #tried to position to before start of file (r/w) -eofErr = -39 #End of file -fnOpnErr = -38 #File not open -bdNamErr = -37 #there may be no bad names in the final system! -ioErr = -36 #I/O error (bummers) -nsvErr = -35 #no such volume -dskFulErr = -34 #disk full -dirFulErr = -33 #Directory full -dceExtErr = -30 #dce extension error -unitTblFullErr = -29 #unit table has no more entries -notOpenErr = -28 #Couldn't rd/wr/ctl/sts cause driver not opened -iIOAbortErr = -27 #IO abort error (Printing Manager) -dInstErr = -26 #DrvrInstall couldn't find driver in resources -dRemovErr = -25 #tried to remove an open driver -closErr = -24 #I/O System Errors -openErr = -23 #I/O System Errors -unitEmptyErr = -22 #I/O System Errors -badUnitErr = -21 #I/O System Errors -writErr = -20 #I/O System Errors -readErr = -19 #I/O System Errors -statusErr = -18 #I/O System Errors -controlErr = -17 #I/O System Errors -dsExtensionsDisabled = -13 #say –Extensions Disabled” -dsHD20Installed = -12 #say –HD20 Startup” -dsDisassemblerInstalled = -11 #say –Disassembler Installed” -dsMacsBugInstalled = -10 #say –MacsBug Installed” -seNoDB = -8 #no debugger installed to handle debugger command -SlpTypeErr = -5 #invalid queue element -unimpErr = -4 #unimplemented core routine -corErr = -3 #core routine number out of range -dsNoExtsDisassembler = -2 #not a SysErr, just a placeholder -qErr = -1 #queue element not found during deletion -tsmComponentNoErr = 0 #component result = no error -EPERM = 1 #Operation not permitted -ENOENT = 2 #No such file or directory -ESRCH = 3 #No such process -EINTR = 4 #Interrupted system call -EIO = 5 #Input/output error -ENXIO = 6 #Device not configured -E2BIG = 7 #Argument list too long -ENOEXEC = 8 #Exec format error -EBADF = 9 #Bad file descriptor -ECHILD = 10 #No child processes -EDEADLK = 11 #Resource deadlock avoided -ENOMEM = 12 #Cannot allocate memory -EACCES = 13 #Permission denied -EFAULT = 14 #Bad address -ECANCELED = 15 #Operation cancelled -EBUSY = 16 #Device busy -EEXIST = 17 #File exists -EXDEV = 18 #Cross-device link -ENODEV = 19 #Operation not supported by device -ENOTDIR = 20 #Not a directory -EISDIR = 21 #Is a directory -EINVAL = 22 #Invalid argument -ENFILE = 23 #Too many open files in system -EMFILE = 24 #Too many open files -ENOTTY = 25 #Inappropriate ioctl for device -ESIGPARM = 26 #Signal error -EFBIG = 27 #File too large -ENOSPC = 28 #No space left on device -ESPIPE = 29 #Illegal seek -EROFS = 30 #Read-only file system -EMLINK = 31 #Too many links -EPIPE = 32 #Broken pipe -EDOM = 33 #Numerical argument out of domain -ERANGE = 34 #Result too large -EAGAIN = 35 #Resource temporarily unavailable -EINPROGRESS = 36 #Operation now in progress -EALREADY = 37 #Operation already in progress -ENOTSOCK = 38 #Socket operation on non-socket -EDESTADDRREQ = 39 #Destination address required -EMSGSIZE = 40 #Message too long -EPROTOTYPE = 41 #Protocol wrong type for socket -ENOPROTOOPT = 42 #Protocol not available -EPROTONOSUPPORT = 43 #Protocol not supported -ESOCKTNOSUPPORT = 44 #Socket type not supported -EOPNOTSUPP = 45 #Operation not supported -EPFNOSUPPORT = 46 #Protocol family not supported -EAFNOSUPPORT = 47 #Address family not supported by protocol family -EADDRINUSE = 48 #Address already in use -EADDRNOTAVAIL = 49 #Can't assign requested address -ENETDOWN = 50 #Network is down -ENETUNREACH = 51 #Network is unreachable -ENETRESET = 52 #Network dropped connection on reset -ECONNABORTED = 53 #Software caused connection abort -ECONNRESET = 54 #Connection reset by peer -ENOBUFS = 55 #No buffer space available -EISCONN = 56 #Socket is already connected -ENOTCONN = 57 #Socket is not connected -ESHUTDOWN = 58 #Can't send after socket shutdown -ETOOMANYREFS = 59 #Too many references: can't splice -ETIMEDOUT = 60 #Operation timed out -ECONNREFUSED = 61 #Connection refused -ELOOP = 62 #Too many levels of symbolic links -ENAMETOOLONG = 63 #File name too long -EHOSTDOWN = 64 #Host is down -EHOSTUNREACH = 65 #No route to host -ENOTEMPTY = 66 #Directory not empty -ELOOK = 67 #Internal mapping for kOTLookErr, don't return to client -ENOLCK = 77 #No locks available -ENOSYS = 78 #Function not implemented -EILSEQ = 88 #Wide character encoding error -EUNKNOWN = 99 #Unknown error |